Circular Saw Blades

NF Circular Saw Blades
108352
NF-Chop Saw Blades HW- profiles „G7“
Product
Drawing
tungsten carbide [HW]
Machine / Application Design Advantages Notes
Ι clipping and miter saws
Ι table saws
Ι clipping and miter cuts in PVC
profiles
Ι for burr-free and smooth cuts in
aluminum window and façade
profiles
Ι negative hook angle
Ι tooth configuration: "G7"
Ι cutting material: HW HL Board
06
Ι reduced cutting pressure thanks
to group tooth geometry
Ι excellent burr-free cuts with
low roughness thanks to tooth
partition
Ι extremely noise-reduced thanks
to special laser ornaments
Ι increased edge life compared
to chop saw blades with tooth
configuration "TR-F"
Ι increased performanceand
economic efficiency
Ι tight workpiece clamping
required
Ø D B b Ø d Z NL Ident-No.
350 3,2 2.5 30 112
2/9/55 + 2/12/64 +
4/12/64
192275
350 3,5 2.8 30 98 2/10/60 DeWALT, Haffner, Pfeiffer, Rotox 192274
350 3,8 3.2 40 84 4/12/64 + 2/9/55
Eisele LSM II, -LSM II-PV, -VA-L, Graule,
Ulmia, Weidmann
192273
400 3,8 3.2 30 98 2/12/64 + 4/15/80 DeWALT, Haffner 192276
420 4,0 3.2 30 98 Rapid, ELU 192277
450 3,8 3.2 30 112 4/12/64 + 2/12/80 DeWALT, Haffner 192278
500 4,0 3.4 30 126 2/10/70 Pfeiffer, Rapid 192279
550 4,0 3.4 30 133 2/12/64 + 4/15/80 Pfeiffer, Rapid 192392
[mm] [mm] [mm] [mm]
1–61