Circular Saw Blades

Technical Information Circular Saw Blades
Order / Inquiry for Special Tools: Circular Saw Blades
Please copy and send the completed form to one of the LEUCO sales offices. (Only one tool description per form)
Customer-no.: Order: o
Company: Inquiry: o
Plant:
Street:
Zip / City:
Country:
Contact partner:
Phone:
City and Date:
Machine
Delivery (week no.):
(Not binding)
No. of pieces:
Fax:
Signature:
Countersinks and recesses
Make:
No. of countersinks:
Model:
Bore diameter db [mm]:
Type:
Countersink diameter ds [mm]:
Operating RPM [min-1]: Position angle α [°]:
Feed rate [m/min]:
Boring circle diameter Dt [mm]:
Flange diameter [mm]:
No. of recesses:
Motor output [kW]: Double keyway: Width bk Height hk
Type of machine: One shaft o
Two shafts o Keyway: Width bk Height hk
Mode of application:
Against feed: From top o Pin holes: No. Ø NL Ø TK
From bottom
o
With feed: From top o Countersinks (per drawing): o
From bottom o Cut-outs for hoggers (per drawing): o
Workpiece
No. of teeth [pcs.]:
Description:
Rakers:
Cut height [mm]: Tooth configuration: Flat o
Type of cut: Single o Alternate top bevel o
Stack o Top bevel o
Cutting quality: Coarse o Hollow-ground o
Trimming cut o Triple-chip o
Finish cut o Inverted-v o
For solid wood: With grain o Conical-alternate bevel o
Across grain o Hollow-ground / chamfer o
For wood-based panels: Sizing o Triple chip / flat o
Trimming o ATB / flat o
Tool
With relieved tool body:
Cutting diameter D [mm] Hub location (per drawing): A o B o
Cutting width B [mm]
Saw plate thickness b [mm]:
Hub diameter D1 [mm]:
Hub width b1 [mm]:
Bore diameter d [mm]: Sense of rotation: Right o Left o
Application: Single o Set o
o Check if applicable
516-01.0708 Page 1 of 2
1–72