User Manual myGEKKO RIO modules
User Manual myGEKKO RIO modules
User Manual myGEKKO RIO modules
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.1.12 Functional description Dip switch <strong>RIO</strong> 29<br />
The DIP-switches are activated when the corresponding switches are pushed upwards.<br />
Parameters Values<br />
<strong>Manual</strong> operation switch<br />
1..8<br />
State of the corresponding output in manual mode or at bus<br />
timeout.<br />
ON = Output ON<br />
OFF = Output OFF<br />
Behaviour of outputs in case of communication interruption.<br />
A<br />
B<br />
LED<br />
ON = Outputs retain current state (not remanent)<br />
OFF = Outputs attain the set manual mode.<br />
Reserve (without functionality)<br />
State of the status LED on the module.<br />
ON = All LEDs are switched off<br />
OFF=All LEDs show the current module state<br />
<strong>Manual</strong> operation<br />
<strong>Manual</strong><br />
ON = Switches all outputs to manual operation mode<br />
OFF=Automatic mode<br />
12
Change language