2016_catalog_web
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ANATOMY OF A PORTABLE TANK<br />
PORTABLE tanks, defined by the EPA as 12 gallons or less, are not intended for permanent<br />
installations, but are used to convey fuel directly to the engine. Like all Moeller products, they<br />
feature the same attention to detailed engineering and robust construction which set apart<br />
our fuel tanks from inferior brands. As previously mentioned, they prevent the escape of<br />
hydrocarbons at the molecular level. Constructed from seamless, thick-walled plastic, they are<br />
up to 30% heavier than our competition.<br />
620049LP<br />
Ultra 6<br />
Other features:<br />
9 ABYC/NMMA/EPA/CARB<br />
Compliant<br />
9 Rotating fuel withdrawal<br />
9 Fuel reserve<br />
9 Sight gauge<br />
9 Cap tether<br />
9 Audible click on closure of cap<br />
9 Two-way vented cap<br />
9 Two-year warranty<br />
ANATOMY OF TWO TOPSIDE TANKS<br />
Each topside tank model is available in an EPA-compliant version and an international configuration<br />
which does not comply with 2011 EPA regulations. EPA-compliant tanks must be used in the US<br />
and Canada, while international tanks are ideal for use in all other locations worldwide.<br />
EPA COMPLIANT--Moeller engineers designed the tank on the right to meet EPA permeation and<br />
emissions requirements. Available in capacities which range from 14 to 24 gallons, this model was<br />
specifically developed for use in Carolina Skiff, Boston Whalers and Key West bench style, center<br />
console, pontoon, deck and jon boat designs. Here’s what you get with all Moeller Barrier Tanks:<br />
Cross-linked polyethylene and UV-stabilized resin construction.<br />
EPA-compliant safety cap<br />
Molded-in fill neck<br />
Direct-sight gauge for convenient reading<br />
1/4 NPT fuel withdrawal elbow angled at 90°<br />
031527<br />
031527BR<br />
International and Boats Built before 2011-- Because countries outside<br />
the US and Canada do not require EPA compliance, non-EPA tanks are<br />
manufactured without the barrier layer. Note that the international-style<br />
cap also includes a direct-sight gauge for convenient reading.<br />
Check out our full line of portable and topside tanks, described on the<br />
following pages. Or go to www.moellermarine.com.<br />
| 4
Change language