A Review of MAPAL's Competence - Mapal.us
A Review of MAPAL's Competence - Mapal.us
A Review of MAPAL's Competence - Mapal.us
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
22<br />
MAPAL standard<br />
facing heads<br />
LAT...1...<br />
LAT...2...<br />
Single slide<br />
Parallel twin slide<br />
Spindle speed range:<br />
low spindle speeds<br />
LAT…1…spindle speed limit:<br />
n max =<br />
2400<br />
Hub *<br />
* slide stroke and change <strong>of</strong> center <strong>of</strong> gravity<br />
Type <strong>of</strong> operation:<br />
Mainly internal machining, medium to<br />
heavy machining with maximum overall<br />
rigidity in the “slide – tool” system.<br />
Spindle speed range:<br />
Medium spindle speeds.<br />
Important note: The traction force<br />
depends on spindle speed, stroke and<br />
tool weight.<br />
MAPAL ISOTOOL supplies calculations<br />
for the dimensions <strong>of</strong> the cross feed<br />
device.<br />
Type <strong>of</strong> operation:<br />
In contrast to the standard “face turning<br />
from outside to inside”, LAT…2…<br />
facing heads can also be supplied in a<br />
semi-standard version for “face turning<br />
from inside to outside”.
Change language