ABAQUS user subroutines for the simulation of viscoplastic - loicz

6. References
AI, S.H.; LUPINC, V. and MALDINI, M. (1990): "Creep fracture mechanics in single crystal superalloys".
In: High Temperature materials for Power Engineering 1990, Proceedings of a Conference held in
Liège, Belgium, 24-27 September 1990. Part II (Eds. E. BACHELET et al.)
BERTRAM, A.; OLSCHEWSKI, J. (1993): "Zur Formulierung anisotroper linearer anelastischer
Stoffgleichungen mit Hilfe einer Projektionsmethode". ZAMM 73 (4-5), T401-403.
BERTRAM, A.; OLSCHEWSKI, J. (1996): "Anisotropic creep modeling of the single crystal superalloy
SRR99". J. Comp. Mat. Sci. 5, pp.12-16.
BODNER, S.R.; PARTOM, Y. (1975): "Constitutive equations for elastic-viscoplastic strain hardening
materials". J. Appl. Mech. 42, pp.385-389.
CHABOCHE, J.L.; ROUSSELIER, G. (1983): "On the plastic and viscoplastic constitutive equations". J.
Press. vess. technol. 105, pp.105-164.
GERMAIN, P.; NGUYEN, Q. S.; SUQUET, P. (1983): "Continuum Thermodynamics". J. Appl. Mech. 50,
pp.1010-1020.
KOBAYASHI, K.I.; IMADA, H.; MAJIMA, T. (1998): "Nucleation and growth of creep voids in
circumferentially notched specimens", JSME Int. J., Series A: Solid Mechanics and Material
Engineering, 41, 218-224.
KRAJCINOVIC, D. (1983): "Constitutive equations for damaging materials". J. Appl. Mech. 50, pp. 355-
360.
MOHR, R. (1999): "Modellierung des Hochtemperaturverhaltens metallischer Werkstoffe". Dissertation,
Technische Universität Hamburg-Harburg, GKSS 99/E/66.
OLSCHEWSKI, J.; SIEVERT, R.; MEERSMANN, J. and ZIEBS, J. (1990): "Selection, calibration and
verification of viscoplastic constitutive models used for advanced blading methodology". In: High
Temperature Materials for Power Engineering, Proceedings of a Conference held in Liège, Belgium,
24-27 September 1990 (Eds. BACHELET et al.), Kluwer Academic Publishers, pp.1051-1060.
QI, W.; BERTRAM, A. (1997): "Anisotropic creep damage modeling of single crystal superalloys".
Technische Mechanik. 17(4), pp.313-322.
QI, W. (1998): "Modellierung der Kriechschädigung einkristalliner Superlegierungen im
Hochtemperaturbereich". Dissertation, Technische Universität Berlin, Fortschritts-Berichte VDI Verlag
GmbH, Düsseldorf.
QI, W.; BERTRAM, A. (1998): "Damage modeling of the single crystal superalloy SRR99 under
monotonous creep". Computational Materials Science 13, pp.132-141.
33