Application of Aircrete Blocks - Design for Homes

More documents

Recommendations

Info

Internal Finishing Types: –Plaster Plaster –Drylining Drylining –Tiles Tiles •Preparation Preparation •Specification Specification •Application Application This slide really used as an overview for the following one. Preparation: Block surfaces should be clean of dust, loose particles or contamination before application of finish 38
Finishes - Internal • Plasterboard on dabs • Lightweight plaster - min 13mm thick – Joints should be recessed • Dense plaster - min 13mm thick – Mix to be 1:1:6 (C:L:S) – Blockwork may need to be wetted to balance the initial suction – Joints should be recessed •Thin Thin coat spray plaster can be applied to Thin-Joint walls •Tiling Tiling – Direct to wall if blockwork plumb • Painted Plasterboard: Standard and laminated thermal boards can be bonded directly to the blockwork. Standard boards can be fixed using plaster dabs Thermal boards should be fixed using an appropriate gap-filling adhesive, secondary nailing is also required (in case of fire) 13mm plaster achieved in two coats (10mm + 3mm finish) Because of the wall accuracy in Thin-Joint, a spray plaster (3- 4mm) can be used, this can reduce the time taken. Blockwork wetting:Relatively small areas at a time Although traditionally tiling is applied to a wall which has got a plaster finish, they can be laid straight onto the blockwork, if the wall is plumb (Thin-Joint adv) For areas of low aesthetic importance the blocks can be painted 39
Page 1 and 2: Application of Aircrete Blocks 1
Page 3 and 4: History of Aircrete •Developed De
Page 5 and 6: Production Process Rising and initi
Page 7 and 8: Properties of Aircrete Blocks Low D
Page 9 and 10: Identification Normal V-Key Borough
Page 11 and 12: Applications •Below Below Ground
Page 13 and 14: Medium Density (Standard) Nominal D
Page 15 and 16: Low Density Solar 2.8 & 3.5* Nomina
Page 17 and 18: Hi-Density Nominal Density 750 kg/m
Page 19 and 20: Hi-Strength for Tonbridge & Malling
Page 21 and 22: Laying Rates for Foundations* Brick
Page 23 and 24: Flooring Blocks •440 440 x 560mm
Page 25 and 26: Floors Additional benefits of using
Page 27 and 28: Thin-Joint System •440 440 x 430m
Page 29 and 30: External Solid Walls •265mm 265mm
Page 31 and 32: Food Sciences Building University o
Page 33 and 34: Party Walls •Typically Typically
Page 35 and 36: Movement Joints •Aircrete Aircret
Page 37: Wall Ties •Flexible Flexible wall
Page 41 and 42: Finishes - External •Tile Tile ha
Page 43 and 44: FIXINGS Helical nail Fisher GB Plug
Page 45 and 46: Technical Sales Dept: Technical Tea
Page 47 and 48: Environmental Issues •Main Main i

Application of Aircrete Blocks - Design for Homes

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?