Techniks Tool Holding Systems - JW Donchin CO.

More documents

Recommendations

Info

ER and TG Tool Holders and Extensions 16 BT 40 Precision Tool Holders and BT40 CoolFLEX Holders Holder includes our Power Coat nut that holds 75% tighter. NOTE: ER 11, 16, and 20 tool holders come with hex nut as standard. For slotted nuts simply add SLOTNUT to the end of the part number. For holders with coolant nut included add -C to the end of the part number. BT 40 Precision ER and CoolFLEX DIN B Tool Holders Techniks Collet Chuck Advantages • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" or better from taper to collet pocket • Taper ground to AT3 accuracy or better • Each holder lab certified for accuracy and balance CoolFLEX Tool Holders CoolFLEX holders are factory set for coolant-thru spindle. Simply remove stop screws (2) for DIN B coolant. See page 11 for details. AT3 precision ground taper Part No. Description l1 D Max. Shank Stop Screw Wrench 06151 BT 40 x ER 16 - 70mm, hex nut 70mm 1.08" .406" 06083 04609 06153 BT 40 x ER 16 - 100mm, hex nut 100mm 1.08" .406" 06083 04609 06155 BT 40 x ER 16 - 125mm, hex nut 125mm 1.08" .406" 06083 04609 06157 BT 40 x ER 16 - 150mm, hex nut 150mm 1.08" .406" 06083 04609 06158 BT 40 x ER 16 - 180mm, hex nut 180mm 1.08" .406" 06083 04609 06159 BT 40 x ER 20 - 70mm, hex nut 70mm 1.34" .512" 06085 04610 06162 BT 40 x ER 20 - 100mm, hex nut 100mm 1.34" .512" 06085 04610 06165 BT 40 x ER 20 - 135mm, hex nut 135mm 1.34" .512" 06085 04610 06167 BT 40 x ER 20 - 150mm, hex nut 150mm 1.34" .512" 06085 04610 06169 BT 40 x ER 25 - 70mm, slotted nut 70mm 1.65" .630" 06089 04615 06171 BT 40 x ER 25 - 100mm, slotted nut 100mm 1.65" .630" 06089 04615 06175 BT 40 x ER 25 - 150mm, slotted nut 150mm 1.65" .630" 06089 04615 06177 BT 40 x ER 32 - 70mm, slotted nut 70mm 1.97" .788" 06089 04616 06179 BT 40 x ER 32 - 100mm, slotted nut 100mm 1.97" .788" 06089 04616 06181 BT 40 x ER 32 - 150mm, slotted nut 150mm 1.97" .788" 06089 04616 06183 BT 40 x ER 40 - 80mm, slotted nut 80mm 2.48" 1.023" 06089 04617 06185 BT 40 x ER 40, 100mm, slotted nut 100mm 2.48" 1.023" 06089 04617 06189 BT 40 x ER 40 - 150mm, slotted nut 150mm 2.48" 1.023" 06089 04617 06151F BT 40 x ER 16 - 70mm, hex nut, CoolFLEX 70mm 1.08" .406" 06083 04609 06153F BT 40 x ER 16 - 100mm, hex nut, CoolFLEX 100mm 1.08" .406" 06083 04609 06157F BT 40 x ER 16 - 150mm, hex nut, CoolFLEX 150mm 1.08" .406" 06083 04609 06159F BT 40 x ER 20 - 70mm, hex nut, CoolFLEX 70mm 1.34" .512" 06085 04610 06162F BT 40 x ER 20 - 100mm, hex nut, CoolFLEX 100mm 1.34" .512" 06085 04610 06167F BT 40 x ER 20 - 150mm, hex nut, CoolFLEX 150mm 1.34" .512" 06085 04610 06177F BT 40 x ER 32 - 70mm, slotted, CoolFLEX 70mm 1.97" .788" 06089 04616 06181F BT 40 x ER 32 - 150mm, slotted, CoolFLEX 150mm 1.97" .788" 06089 04616 Call (800) 597-3921 or (317) 803-8000 to speak to a tool holder specialist. D view from back of holder back of flange taper DIN coolant thru hole
Coolant BT ER Mini Nut Holders and Super Rigid Holders High Speed BT 30, BT 40 ER Mini Nut Holders Part No. Description l1 D Max. Shank Stop Screw Wrench 16304 BT 30 x ER 11 - 100mm, mini nut 100mm 16mm .275" 06081 04621 16308 BT 30 x ER 16 - 70mm, mini nut 70mm 22mm .406" 06083 04622 16312 BT 30 x ER 16 - 120mm, mini nut 120mm 22mm .406" 06083 04622 16314 BT 30 x ER 20 - 100mm, mini nut 100mm 28mm .512" 06087 04623 16318 BT 30 x ER 20 - 150mm, mini nut 150mm 28mm .512" 06087 04623 16321 BT 40 x ER 11 - 70mm, mini nut 70mm 16mm .275" 06081 04621 16324 BT 40 x ER 11 - 150mm, mini nut 150mm 16mm .275" 06081 04621 16325 BT 40 x ER 16 - 70mm, mini nut 70mm 22mm .406" 06083 04622 16328 BT 40 x ER 16 - 150mm, mini nut 150mm 22mm .406" 06083 04622 16328-200 BT 40 x ER 16 - 200mm, mini nut 200mm 22mm .406" 06083 04622 16329 BT 40 x ER 20 - 70mm, mini nut 70mm 28mm .512" 06087 04623 16330 BT 40 x ER 20 - 100mm, mini nut 100mm 28mm .512" 06087 04623 16332 BT 40 x ER 20 - 150mm, mini nut 150mm 28mm .512" 06087 04623 BT 40 Super Rigid ER Tool Holders Techniks Collet Chuck Advantages See page 98 for replacement Mini Nuts. • Narrow nut diameter for better clearance • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" or better from taper to collet pocket • Each holder lab certified for accuracy and balance Part No. Description l1 Collet Max. Shank Wrench TE-06177S BT 40 x ER 32 - 36mm 36mm ER32 3/4" or 20mm 894-36 TE-22HN hex style nut TE-22CN castle style nut Super Rigid ER Tool Holder Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" extends tool life • Taper ground to AT3 accuracy • Use with ER collets • Each holder lab certified 36 mm Sign up for our free monthly email promotions at: www.techniksusa.com 70 mm Minimal projection maximizes rigidity. TE holders are an ideal choice for high speed or high torque machining. D 17 ER and TG Tool Holders and Extensions
Page 1 and 2: Techniks Tool Holding Systems Succe
Page 3 and 4: Tool Holders Collets & Nuts Setup E
Page 5 and 6: CoolBLAST & CoolFLEX Enabled Tool H
Page 7 and 8: Why is improving cutting tool life
Page 9 and 10: Haas Office Mill Tooling / CAT 12-P
Page 11 and 12: Inch and Metric Sizes ER and TG Too
Page 13 and 14: CAT 40, CoolFLEX DIN B and Coolant-
Page 15 and 16: AT3 precision ground taper CAT 50 E
Page 17: BT 30 Precision ER Tool Holders BT
Page 21 and 22: HSK 32A, 40A, 50A, 63A, 100A ER Too
Page 23 and 24: ISO, SK, and BT Tool Holders for CN
Page 25 and 26: ER Coolant-Thru Shanks, ER CNC Lath
Page 27 and 28: Double your tool life or better wit
Page 29 and 30: CAT 40 Extended and Rigid Reach End
Page 31 and 32: CAT 50 Stubby and Standard Length E
Page 33 and 34: CAT 50 CoolBLAST and CoolFLEX End M
Page 35 and 36: BT 40 Extended Length and Rigid Rea
Page 37 and 38: BT 50 End Mill Holders - End Mill L
Page 39 and 40: Shrink-Fit Holders, Shell Mill Arbo
Page 41 and 42: CAT 40 Inch Size Extended Length Sh
Page 43 and 44: CAT 40 CoolBLAST/CoolFLEX DIN B Shr
Page 45 and 46: See page 48 for extensions. BT 30 S
Page 47 and 48: HSK 63A Inch Size Shrink-Fit Tool H
Page 49 and 50: HSK 100A Shrink-Fit Tool Holders HS
Page 51 and 52: TechnoSHRINK II Affordable inductio
Page 53 and 54: BT Shell Mill Arbors BT Shell Mill
Page 55 and 56: CAT and BT High-Performance Milling
Page 57 and 58: DualDRIVE, Slim-Fit, and Hydraulic
Page 59 and 60: DualDRIVE For BIG-PLUS ® and stand
Page 61 and 62: For BIG-PLUS ® DualDRIVE and stand
Page 63 and 64: Slim-Fit CAT 40, CAT 50 Tool Holder
Page 65 and 66: CAT, BT, and HSK63A Hydraulic Expan
Page 67 and 68: Drill Chucks and SIMIS Tool Holders
Page 69 and 70:
CAT and BT SPU Drill Chucks CAT and
Page 71 and 72:
BT Tool Holders For Jacobs Taper Dr
Page 73 and 74:
CAT 40 ER Tool Holders SIMIS CAT 40
Page 75 and 76:
Quick-Change Tap Holders and Collet
Page 77 and 78:
HSK & Straight Shank Tension / Comp
Page 79 and 80:
HSK Rigid Tap Holders HSK and Strai
Page 81 and 82:
ANSI Rigid Tap Collets ANSI Rigid T
Page 83 and 84:
Collets, Tap Collets, Nuts, Coolant
Page 85 and 86:
ER 25 Inch Size Collets Part No. Ra
Page 87 and 88:
Metric Size ER Precision Collets Ou
Page 89 and 90:
Dead Nuts Accurate Collets, Nuts, a
Page 91 and 92:
ER Quick-Change Rigid Tap Collets F
Page 93 and 94:
ER 16 Sealed Collets Part No. Shank
Page 95 and 96:
Note ER 16 Metric Size Part No. Sha
Page 97 and 98:
Power Coat ER Coolant Nuts Power Co
Page 99 and 100:
ER 32 Coolant Rings Part No. Range
Page 101 and 102:
Dimensions Precision TG 75 Collets
Page 103 and 104:
TG 100 Sealed Coolant Collets, Powe
Page 105 and 106:
Dimensions Collet Series L D DA 180
Page 107 and 108:
Retention Knobs and Setup Equipment
Page 109 and 110:
BT Retention Knobs Dimensions in mi
Page 111 and 112:
Retention Knobs for CNC Routers Ple
Page 113 and 114:
Adjustable Torque Wrenches and Coll
Page 115 and 116:
Digital Height Gauge, TSHG1 Tighten
Page 117 and 118:
ER Collet Pocket Dimensions and Pre
Page 119 and 120:
Techniks Pinzbohr Modular Boring To
Page 121 and 122:
“Accu-set” dial allows operator
Page 123 and 124:
Accu-Set Finish Heads - 90˚ Lead A
Page 125 and 126:
Speed-Set Rough Heads - 90˚ Rough
Page 127 and 128:
Carbide Boring Bars Boring Bars for
Page 129 and 130:
Modular design helps reduce tooling
Page 131 and 132:
TiN coated and Cermet inserts pg. 1
Page 133 and 134:
Weldon Tool holder Weldon 3/4" Size
Page 135 and 136:
Reducers Reducers Key to Part Numbe
Page 137 and 138:
Indexable Cartridges .020" axial st
Page 139 and 140:
Part No: BohrSTAR 54 Kit R BohrSTAR
Page 141 and 142:
Speeds and Feeds Guidelines Optimal
Page 143 and 144:
Large Finish Boring Heads Spare Par
Page 145:
Large Rough Boring Heads Spare Part
Page 148 and 149:
Part No. Page Part No. Page Part No
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156:
show all

Techniks Tool Holding Systems - JW Donchin CO.

Create successful ePaper yourself

Delete template?

Save as template?