Techniks Tool Holding Systems - JW Donchin CO.
Techniks Tool Holding Systems - JW Donchin CO.
Techniks Tool Holding Systems - JW Donchin CO.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WHAT’S<br />
NEW!<br />
2<br />
DualDRIVE <strong>Tool</strong>ing for DUAL-Contact Machining<br />
DualDRIVE<br />
ER Collet Chucks<br />
DualDRIVE<br />
End Mill Holders<br />
DualDRIVE<br />
Shrink Fit Holders<br />
DualDRIVE<br />
Shell Mill Arbors<br />
Choose DualDRIVE for DUAL-<strong>CO</strong>NTACT Machining<br />
• For BIG-PLUS ® * and standard spindles<br />
• DUAL-Contact improves rigidity, reduces vibration<br />
• Improves surface finish, accuracy, and extends tool life<br />
• CoolFLEX DIN B coolant feature on ER Collet Chucks<br />
and Shrink-Fit tool holders holders<br />
DualDRIVE For BIG-PLUS* and standard spindles<br />
Standard tool holder DualDRIVE tool holder<br />
1/8" gap between<br />
tool holder and<br />
spindle face<br />
allows holder to<br />
give under high<br />
side loads.<br />
For BIG-PLUS ® and<br />
standard spindles*<br />
DUAL-Contact with<br />
spindle taper and face<br />
provides increased rigidity.<br />
Use when high metal removal<br />
rates, high-speed, and/or<br />
machining at extended lengths is desired.<br />
Shim kit available for DUAL-Contact<br />
machining on other machine spindles.<br />
DualDRIVE eliminates<br />
the gap for<br />
increased rigidity<br />
and accuracy.<br />
SPINDLE<br />
FACE <strong>CO</strong>NTACT<br />
DualDRIVE eliminates<br />
gap between flange<br />
and spindle for<br />
increased rigidity.<br />
IMPROVES t.i.r.<br />
*BIG-PLUS ® is a trademark of Daishowa Seiki Kabushiki Kaisha; Big Daishowa Seiki Co.,<br />
Ltd., Corp. and is used here only for identification purposes.<br />
Please turn to pages 55 thru 59 for DualDRIVE tool holders.