Techniks Tool Holding Systems - JW Donchin CO.

Double your tool life or better with our high-precision end mill holders.
Others T.I.R. .0008" Techniks .0002"
Air gap creates
vibration
End Mill Holders, Morse Taper Holders
Manufactured to H5 Tolerance
Techniks end mill holders are the
most accurate on the market for
improved T.I.R. and extended tool
life. (see diagram below)
Factory Balanced to 10,000 RPM
Improved balance reduces vibration,
improves tool life, and minimizes
spindle bearing wear.
Lab Certified Accuracy
Each tool holder is lab certified for
H5 bore tolerance and taper
accuracy AT3.
H5 Tolerance Saves Cutting Tool Life
Minimal
contact
with bore
Three Coolant Style Holders Available
We don't sell tool holders, we sell tool life.
Choose CoolBLAST coolant style (shown above)
or CoolFLEX for DIN B style coolant, or get both
technologies in one holder for maximum
coolant flexibility.
Cutting tool life is reduced
by 10% with every .0001"
of T.I.R. The rigidity and
accuracy of Techniks End
Mill holders minimizes
T.I.R., so you can achieve
maximum tool life.
All Techniks products are backed by our 100% satisfaction guarantee! 25
End Mill Mill Holders, Holders, Morse Morse Taper Taper Holders Holders