3 - Veneziani Yacht Paints

SPECIAL PARTS
Metal keels Propellers, shafts and stern drives
1 coat of EPOXY PRIMER
(DFT 40 microns per coat, theoretical
coverage per coat 10,5 m2 /L)
3 coats of AQUASTOP
(DFT 200 microns per coat, theoretical
coverage per coat 5,0 m2 /L)
1 coat of EPOXY PRIMER
(DFT 40 microns per coat, theoretical
coverage per coat 10,5 m2 /L)
3 coats of AQUASTOP
(DFT 200 microns per coat, theoretical
coverage per coat 5,0 m2 /L)
1 coat of ADHERGLASS
(DFT 15 microns per coat, theoretical
coverage per coat 13,3 m2 /L)
2 coats of ANTIFOULING
(DFT and theoretical coverage depending
on antifouling type used)
3 coats on rudder and areas with
higher friction
1 coat of ADHERPOX
(DFT 100 microns per coat, theoretical
coverage per coat 6,0 m2 /L)
2 coats of ANTIFOULING
(DFT and theoretical coverage depending
on antifouling type used)
3 coats on rudder and areas with
higher friction
1 coat of PROPELLER PRIMER
(DFT 15 -20 microns per coat,
theoretical coverage per coat
19,0-14,5 m 2 /L)
2
2 coats of PROPELLER
(DFT 30 microns per coat, theoretical
coverage per coat 15 m 2 /L)
Peaks, storerooms, iceboxes and bilges
Teak decks
TEAK 1
TEAK 2
TEAK 3
Inflatable boat
GUMMIPAINT
GUMMIPAINT A/F
1 coat of CERAMITE YACHTING
2 coats for permanently submerged surfaces
(DFT 150 microns per coat, theoretical
coverage per coat 6,7 m2 /L)
On new wood apply first 1 coat of
FIBRODUR (DFT 20 microns per coat,
theoretical coverage per coat 12,5 m2 /L)
For PEAKS and BILGES 2 coats of
SENTIFLEX, not suitable for permanently
submerged surfaces (DFT 40 microns
per coat, theoretical coverage per coat
12,7 m 2 /L)
Products for cleaning and protecting the
wood:
For cleaning: TEAK 1
For bleaching: TEAK 2
For protecting: TEAK 3
Non submerged inflatable parts:
2 coats of GUMMIPAINT
(DFT 35 microns per coat, theoretical coverage
per coat 6,6 m2 /L)
Submerged inflatable parts:
2 coats of GUMMIPAINT A/F
(DFT 18 microns per coat, theoretical coverage
per coat 15 m2 /L)
Rigid GRP hull:
Refer to the hull paint system for GRP
boats
11