Apex - Campbell

anchor shackles
www.apexhandtools.com/campbell
Anchor Shackles, Screw Pin (Import)
• Consumer grade
• Standard Material: Shackle bodies forged steel
• Standard Finish: Zinc plated
• Design Factor: 5 to 1
• UPC tagged
Size
Cat. No. UPC No. 020418
Shelf Case Case Weight Working Load Limit
in mm Description Finish Pack Pack lb kg lb kg
3
⁄16 6 Shackle, Screw Pin Zinc T9600335 201509 10 100 10 5 100 45
1
⁄4 7 Shackle, Screw Pin Zinc T9600435 201516 10 100 10 5 400 179
5
⁄16 8 Shackle, Screw Pin Zinc T9600535 201523 10 100 20 9 700 314
Accessories
3
⁄8 10 Shackle, Screw Pin Zinc T9600635 201530 10 100 30 13 1,000 448
1
⁄2 13 Shackle, Screw Pin Zinc T9600835 201547 5 50 35 16 2,000 896
5
⁄8 16 Shackle, Screw Pin Zinc T9601035 201554 5 20 28 13 3,000 1,344
3
⁄4 20 Shackle, Screw Pin Zinc T9601235 201561 5 20 48 22 4,000 1,792
1 25 Shackle, Screw Pin Zinc T9601635 201578 2 10 50 22 5,000 2,240
• Industrial grade
• Forged steel
• Galvanized
• Design Factor: 5 to 1
• Working Load Limit shown on every shackle
• UPC tagged
Anchor Shackles, Screw Pin (Import)
Size
Cat. No.
UPC No. Shelf Case Case Weight Working Load Limit
in mm Description Finish 020418 Pack Pack lb kg Tons kg
3
⁄16 6 Shackle, Screw Pin Galvanized T9640335 211706 10 100 6 3 1
⁄3 302
1
⁄4 7 Shackle, Screw Pin Galvanized T9640435 211683 10 100 11 5 1
⁄2 454
5
⁄16 8 Shackle, Screw Pin Galvanized T9640535 211676 10 100 18 8 3
⁄4 680
3
⁄8 10 Shackle, Screw Pin Galvanized T9640635 211669 10 100 32 14 1 907
1
⁄2 13 Shackle, Screw Pin Galvanized T9640835 211652 5 50 35 16 2 1,814
5
⁄8 16 Shackle, Screw Pin Galvanized T9641035 211645 1 25 38 17 3 1 ⁄4 2,948
3
⁄4 20 Shackle, Screw Pin Galvanized T9641235 211621 1 15 35 16 4 3 ⁄4 4,309
7
⁄8 22 Shackle, Screw Pin Galvanized T9641435 211638 1 10 34 15 6 1 ⁄2 5,897
1 25 Shackle, Screw Pin Galvanized T9641635 211614 1 5 26 12 8 1 ⁄2 7,711
ADVERTENCIA
Para prevenir la posibilidad de una lesión personal sería:
• NO EXCEDA los límites de carga de las cadenas o componentes.
• NO LA UTILICE para cargar hacia arriba o para izar.
• NO LA UTILICE si la cadena o los componentes están visualmente
distorsionados o gastados.
WARNING
To prevent the possibility of serious bodily injury:
• DO NOT EXCEED the working load limits for chain or components.
• DO NOT USE for overhead lifting or hoisting.
• DO NOT USE if the chain or components are visibly distorted or
worn.
71