Norton Abrasives - Catalogue 2015

Norton Diamond / cBN
Stock Wheels
How to Select Norton Stock cBN Wheels
Select
Wheel Dimensions D x T x H Select Diameter x Thickness x Hole from the availability tables.
Use blueprint numbers where available.
Abrasive
Resin Bond Wheels:
CB Norton standard coated cBN (cubic Boron Nitride). Optimized for high performance in
resin bond systems.
Select Norton cBN
abrasive to grind hard
tool steels such as A2,
D2, T15, etc., and tough
alloy steels.
Grit size 100 Roughing. The most common grit size for roughing operations. Select the grit size based
120 For roughing where 100 is too coarse. Also for cut-off applications.
on finish and material
removal rate required.
150 Medium stock removal plus good finish. For combined roughing and finishing applications.
Grade Q Approximately 50 concentration. Used on wide area of contact applications. The hardness of
T Norton standard. Approximately 75 concentration. T is the first choice for lower horsepower equipment or
large area of contact between the wheel and the work piece. Ideal for resharpening applications with 11V9,
12A2, 4A2P, and 15V9 wheel shapes when dry grinding.
the wheel
W
Most durable. Approximately 100 concentration, W is recommended for high volume coolant operations:
flute grinding from solid, flute polishing, surface, and cylindrical grinding.
Bond B99 Norton standard. Pre-engineered for optimal performance with cBN abrasive.
Available in all shapes.
Aztec III
Aztec
.007
The Norton advanced heat-reducing, lubricating resin bond. Used for dry grinding tool steels.
The Norton premium resin bond for increased feed rates, high stock removal and heavier cuts –
when dry grinding tool steels.
Select the bond
depending on the type of
grinding application.
Abrasive Depth 1/16 Usable abrasive
1/8
1/4
Solid
DIAMOND GRINDS:
In general, diamond is used to
grind non-ferrous materials,
because of an adverse reaction
between diamond and iron.
• Cemented carbide
• Glass
• Ceramics
• Fiberglass
• Plastics
• Stone
• Abrasives
• Electronic components
and materials
cBN GRINDS:
cBN is used to grind ferrous
materials.
• High-speed tool steels
• Die steels
• Hardened carbon steels
• Alloy steels
• Aerospace alloys
• Hardened stainless steel
• Abrasion-resistant
ferrous materials
Our Norton line offers a comprehensive stock
product selection to service most of your needs
– with the fastest delivery and lowest total costs.
Review this stock section first. If you can not find the
specification you need:
• Then refer to the brief descriptions of our B99 Express and
CNC lines (following this section)
• See the more in-depth B99 Express product availability in our
"Diamond and cBN Superabrasives Standard Catalog" #8068 on
www.nortonindustrial.com or contact your Norton
representative for a complete listing of Norton made-to-order
superabrasive products.
It is the user’s responsibility to refer to and comply
with ANSI B7.1
www.nortonabrasives.com
275