SKF - Industrial Shaft Seals

Radial shaft seals
HDW1 seals
HDW1 seals are heavy-duty SKF Wave lip seals,
designed for use in grease or oil lubricated applications.
The seals are produced standard with
a heavy-duty seal body, SKF Bore Tite Coating
on the metal outside diameter, SKF Wave lip in
nitrile rubber, and a carbon steel garter spring.
The rigid seal body can withstand operating
pressures up to 0,24 MPa (35 psi), dynamic, and
0,34 MPa (50 psi), static, while withstanding
shaft speeds up to 25 m/s (4 900 ft/min) at shaft
diameters < 203 mm (8 in.).
The HDW1 seals are available in inch sizes.
HDW1
164