michenfelder elektrotechnik

More documents

Recommendations

Info

An investment that quickly pays for itself! Why does it actually need to be so precise? MICOMP UNI The fully automatic moisture control system type G-CH for batch mixers Is there any more convincing argument? Place your trust in the technology of the market leader and you will find out. You prefer to base your investment decision on facts – no problem either: � Hundreds of success stories regarding its use in all kinds of moulding sand mixers throughout the world � Maximum precision and reliable at every phase of production � Versatile software and hardware expansion options � Achievable precision of ±0.05 -0.1% H 2O* *(in the 1 st standard deviation) � As a basic FoMaSys module, it is designed for expansion and networking with the VEDIMAT online sand testing system (for constant compactability) and the central process control system MiPro FoMaSys-Module As a criterion for good casting quality, there is a greater emphasis than ever on constant mechanical sand parameters (e.g. compactability). The same applies to moisture content as a corrective element. But did you know that fluctuations of just one tenth at the mixer outlet can have a direct influence on compactability of up to 2-3% on the moulding line? No? Well now you know why the precision of moisture measurement and control systems needs to be measured in hundredths. Michenfelder Elektrotechnik GmbH & Co. KG info@michenfelder.com | www.michenfelder.com AUTOMATIC MOISTURE CONTROL SYSTEM FOR MIXERS
Where does the compactability of your sand need to be constant? The success factors – Part 1 VEDIMAT The fully automatic online sand-testing system Do you measure the compactability values in the laboratory or at the mixer only? If that is the case, then you are wasting an opportunity to improve your casting quality and reduce scrappage. The VEDIMAT controls and regulates compactability and measures the compression strength directly in front of the moulding machine because this is the point at which the quality of your moulding sand should be at its peak. � The ideal place for installation Keeping compactability constant at the mixer is not very helpful. This does not identify or take cognisance of negative factors that affect the sand when it is being transported to the moulding machine. A combination of the VEDIMAT and the MICOMP UNI type G-CH systems reliably registers and compensates for these changes (e.g. fluctuations in temperature, evaporation and bentonite saturation effects) so that constant, high quality mechanical sand properties are achieved at the point where they are really needed – on the moulding line. � Networking a high-precision moisture measurement and control system As a compactability correction factor, sand moisture is a very important issue. Moisture fluctuations of one tenth at the mixer outlet can have a direct influence on compactability amounting to ±2-3% on the moulding line. So if you want to keep compactability constant within a narrow band, you need a moisture measurement and control system that measures and controls precisely within a few hundredths. FoMaSys-Module FoMaSys-Modul Michenfelder Elektrotechnik GmbH & Co. KG info@michenfelder.com | www.michenfelder.com ONLINE SAND-TESTING SYSTEM
Page 1 and 2: BEST MOULDING SAND QUALITY FOR BEST
Page 3 and 4: Moulding sand moisturising system T
Page 5: Future-proof and cost-effective fro
Page 9 and 10: Sand conditioning reliability start
Page 11 and 12: MiPro The central process control,

michenfelder elektrotechnik

Create successful ePaper yourself

Delete template?

Save as template?