MEMBER COUNTRIES & INTERNATIONAL REPRESENTATIVES

vertical with its top at 30cm above ground level. Each of the outer
tubes is set around it at an angle of 15° to the vertical in such a way
that the spacing between its top and the top of the central tube is
15cm (measured tube centre to tube centre). The 15° angle can be
achieved by setting the bottoms or projected bottoms at ground
level of the outer tubes at a distance of 7cm from the central tube
bottom or projected bottom at ground level (tube centre to tube
centre).
The exact means of manufacture used, and the exact size and
shape of the base, may require small adjustments to the
measurements given, but the overall height and the positioning and
spread of the tubes must be as described.
Hammers
Rubber or soft plastic toy tools (e.g. Hammer,
Screwdriver, etc.) about 15cm long and 8cm
wide (at their widest point), allowing a point of
grip of no more than 6cm, which do not
squeak when pressed.
HiLo Stand
A 30cm deep net attached to a 20cm
diameter hoop and closed at the
bottom, fixed at the top of a vertical
stand so that the top of the net is 2m13
above the ground. The stand may be
fitted with either a metal spike or some
other form of stabiliser to hold it
securely upright and to maintain the net
in position facing the riders.
Note : for the Under-12 age group the height of the top of the net is
reduced from 2m13 to 1m70.
114