Advanced Queuing - Oracle

More documents

Recommendations

Info

Enqueuing and Dequeuing Of Messages } /* Dequeue a message: */ message = queue.dequeue(deq_option); /* Retrieve raw data from the message: */ raw_payload = message.getRawPayload(); b_array = raw_payload.getBytes(); String ret_value = new String(b_array); System.out.println("Dequeued message: " + ret_value); db_conn.commit(); Enqueuing and Dequeuing of Messages by Priority Using PL/SQL When two messages are enqued with the same priority, the message which was enqued earlier will be dequeued first. However, if two messages are of different priorities, the message with the lower value (higher priority) will be dequeued first. /* Enqueue two messages with priority 30 and 5: */ DECLARE enqueue_options dbms_aq.enqueue_options_t; message_properties dbms_aq.message_properties_t; message_handle RAW(16); message aq.message_typ; BEGIN message := message_typ(’PRIORITY MESSAGE’, ’enqued at priority 30.’); message_properties.priority := 30; DBMS_AQ.ENQUEUE(queue_name => ’priority_msg_queue’, enqueue_options => enqueue_options, message_properties => message_properties, payload => message, msgid => message_handle); message := message_typ(’PRIORITY MESSAGE’, ’Enqueued at priority 5.’); message_properties.priority := 5; A-30 Oracle9i Application Developer’s Guide - Advanced Queuing
DBMS_AQ.ENQUEUE(queue_name => ’priority_msg_queue’, enqueue_options => enqueue_options, message_properties => message_properties, payload => message, msgid => message_handle); END; /* Dequeue from priority queue: */ DECLARE dequeue_options DBMS_AQ.dequeue_options_t; message_properties DBMS_AQ.message_properties_t; message_handle RAW(16); message aq.message_typ; BEGIN DBMS_AQ.DEQUEUE(queue_name => ’priority_msg_queue’, dequeue_options => dequeue_options, message_properties => message_properties, payload => message, msgid => message_handle); DBMS_OUTPUT.PUT_LINE (’Message: ’ || message.subject || ’ ... ’ || message.text ); COMMIT; DBMS_AQ.DEQUEUE(queue_name => ’priority_msg_queue’, dequeue_options => dequeue_options, message_properties => message_properties, payload => message, msgid => message_handle); DBMS_OUTPUT.PUT_LINE (’Message: ’ || message.subject || ’ ... ’ || message.text ); COMMIT; END; Enqueuing and Dequeuing Of Messages /* On return, the second message with priority set to 5 will be retrieved before the message with priority set to 30 since priority takes precedence over enqueue time. */ Oracle Advanced Queuing by Example A-31
Page 1 and 2:
Oracle9i Application Developer’s
Page 3 and 4:
Contents Send Us Your Comments ....
Page 5 and 6:
Enhanced Propagation Scheduling Cap
Page 7 and 8:
Creating AQ Administrators and User
Page 9 and 10:
Support for Statistics Views ......
Page 11 and 12:
Removing an Alias from the LDAP Ser
Page 13 and 14:
Priority and Ordering of Messages..
Page 15 and 16:
Sending a Message Using a Queue Sen
Page 17 and 18:
Specifying JMS Message Property as
Page 19 and 20:
Gateway Agent .....................
Page 21 and 22:
Enqueue of Messages for remote subs
Page 23 and 24:
Send Us Your Comments Oracle9i Appl
Page 25 and 26:
Preface This reference describes fe
Page 27 and 28:
Chapter 9, "Administrative Interfac
Page 29 and 30:
Conventions To download free releas
Page 31 and 32:
Convention Meaning Example [] Brack
Page 33 and 34:
Convention Meaning Example Special
Page 35 and 36:
http://www.oracle.com/accessibility
Page 37 and 38:
What’s New in Advanced Queuing? T
Page 39 and 40:
The servlet parses the content of t
Page 41 and 42:
Dequeue enhancements: Using the deq
Page 43 and 44:
1 Introduction to Oracle Advanced Q
Page 45 and 46:
Figure 1-1 Integrated Application E
Page 47 and 48:
General Features of Advanced Queuin
Page 49 and 50:
Page 51 and 52:
Support for Statistics Views Struct
Page 53 and 54:
XMLType Payloads General Features o
Page 55 and 56:
Figure 1-6 Architecture for Perform
Page 57 and 58:
Correlation Identifiers Enqueue Fea
Page 59 and 60:
Sender Identification Enqueue Featu
Page 61 and 62:
Retries with Delays Dequeue Feature
Page 63 and 64:
Third-Party Support Elements of Adv
Page 65 and 66:
Recipient Elements of Advanced Queu
Page 67 and 68:
Demos You can start a maximum of 10
Page 69 and 70:
Table 1-1 Demos Demo and Locations
Page 71 and 72:
The following basic components are
Page 73 and 74:
Table 2-1 Type Name (type_name) Par
Page 75 and 76:
Syntax TYPE aq$_subscriber_list_t I
Page 77 and 78:
Table 2-4 Nonpersistent Queues Queu
Page 79 and 80:
Table 2-7 lists the enumerated cons
Page 81 and 82:
INIT.ORA Parameter File Considerati
Page 83 and 84:
3 AQ Programmatic Environments This
Page 85 and 86:
Table 3-1 (Cont.) AQ Programmatic E
Page 87 and 88:
Examples Using Visual Basic (OO4O)
Page 89 and 90:
Advanced Queuing Examples For JDK 1
Page 91 and 92:
Oracle JMS Extensions Using Oracle
Page 93 and 94:
Using the AQ XML Servlet to Access
Page 95 and 96:
Table 3-2 Comparison of AQ Programm
Page 97 and 98:
Alter a Subscriber DBMS_AQADM.alter
Page 99 and 100:
Comparing AQ Programmatic Environme
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
4 Managing AQ This chapter discusse
Page 113 and 114:
Access to AQ Object Types Oracle 8.
Page 115 and 116:
LNOCI Applications Queue Table Expo
Page 117 and 118:
Importing Queue Table Data Creating
Page 119 and 120:
Restrictions on Queue Management ig
Page 121 and 122:
Propagation Issues Propagation Issu
Page 123 and 124:
Propagation Issues all these circum
Page 125 and 126:
Migrating To and From 8.0 Oracle 8.
Page 127 and 128:
Security with 8.0-Style Queues Acce
Page 129 and 130:
5 Performance and Scalability This
Page 131 and 132:
Propagation Tuning Tips same segmen
Page 133 and 134:
General Questions 6 Frequently Aske
Page 135 and 136:
General Questions How do you associ
Page 137 and 138:
General Questions 2 - Ex subscriber
Page 139 and 140:
Messaging Gateway Questions mgwadm.
Page 141 and 142:
Messaging Gateway Questions 3. Veri
Page 143 and 144:
Propagation Questions Messaging Gat
Page 145 and 146:
Transformation Questions Messaging
Page 147 and 148:
Messaging Gateway Questions user. E
Page 149 and 150:
Internet Access Questions Why doesn
Page 151 and 152:
Performance Questions How do I use
Page 153 and 154:
Installation Questions 2. Set up us
Page 155 and 156:
Installation Questions NOTE: In Ora
Page 157 and 158:
7 Modeling and Design This chapter
Page 159 and 160:
Basic Queuing Basic Queuing Illustr
Page 161 and 162:
Modeling Queue Entities Consumers A
Page 163 and 164:
Multiconsumer Dequeuing of the Same
Page 165 and 166:
Modeling Queue Entities produced by
Page 167 and 168:
Modeling Queue Entities list of sub
Page 169 and 170:
Modeling Queue Entities application
Page 171 and 172:
Modeling Queue Entities whether the
Page 173 and 174:
8 A Sample Application Using AQ In
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Structured Payloads General Feature
Page 185 and 186:
Page 187 and 188:
For details on XMlType operations r
Page 189 and 190:
end; Nonpersistent Queues END LOOP;
Page 191 and 192:
Page 193 and 194:
OCIAttrGet((dvoid *)subscrhp, OCI_H
Page 195 and 196:
printf("Initialization successful\n
Page 197 and 198:
Page 199 and 200:
* End of file tkaqdocn.c */ Visual
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
AQQueueTableProperty mqt_prop; AQQu
Page 207 and 208:
Support for Statistics Views } Inte
Page 209 and 210:
Enqueue Features cannot have the sa
Page 211 and 212:
compatible => '8.1', \ primary_inst
Page 213 and 214:
Enqueue Features set oraaq = OraDat
Page 215 and 216:
{ AQSession aq_sess; AQQueue booked
Page 217 and 218:
Time Specification: Delay } { /* Cr
Page 219 and 220:
Set OraOrder = OraDatabase.CreateOr
Page 221 and 222:
ack_order_queue_name := 'WS.WS_back
Page 223 and 224:
} Message Grouping } catch (Excepti
Page 225 and 226:
EXECUTE BOLADM.same_order_enq(’My
Page 227 and 228:
dbms_aq.enqueue('WS.ws_bookedorders
Page 229 and 230:
JOHN DASH 100 EXPRESS STREET REDWOO
Page 231 and 232:
Dequeue Features messages with the
Page 233 and 234:
* Dequeue the orders: */ CONNECT ES
Page 235 and 236:
} Multiple Recipients catch (Except
Page 237 and 238:
Dequeue Features init.ora parameter
Page 239 and 240:
deq_cust_data BOLADM.customer_typ;
Page 241 and 242:
Modes of Dequeuing if MsgIsDequeued
Page 243 and 244:
Dequeue Features that the remove de
Page 245 and 246:
Dequeue Features /* Dequeue all int
Page 247 and 248:
} } } db_conn.commit(); Dequeue Fea
Page 249 and 250:
Retry with Delay Interval Dequeue F
Page 251 and 252:
* Create an AQ Session: */ aq_sess
Page 253 and 254:
Dequeue Features DBMS_AQADM.START_Q
Page 255 and 256:
Dequeue Features The following exam
Page 257 and 258:
} Dequeue Features backorders_q = a
Page 259 and 260:
Dequeue Features Eastern Region Sh
Page 261 and 262:
END; queue_name => 'OS.OS_bookedord
Page 263 and 264:
Dequeue Features Scenario In the cu
Page 265 and 266:
no_message EXCEPTION; pragma EXCEPT
Page 267 and 268:
* Get owner, queue where message is
Page 269 and 270:
Dequeue Using the AQ XML Servlet As
Page 271 and 272:
ub4 fedex; ub4 air; ub4 ground; };
Page 273 and 274:
); printf("Initialization successfu
Page 275 and 276:
sb4 errcode = 0; Asynchronous Notif
Page 277 and 278:
Asynchronous Notifications BEGIN --
Page 279 and 280:
Propagation Scenario Enhanced Pro
Page 281 and 282:
PL/SQL (DBMS_AQADM Package): Exampl
Page 283 and 284:
* Check if the schedule has been en
Page 285 and 286:
length is a variable of type NUMBER
Page 287 and 288:
Propagation Features retry time is
Page 289 and 290:
Propagation Features Scenario In th
Page 291 and 292:
import javax.servlet.*; import java
Page 293 and 294:
dbms_aqadm.schedule_propagation('OE
Page 295 and 296:
9 Administrative Interface This cha
Page 297 and 298:
Use Case Model: Administrative Inte
Page 299 and 300:
OR optional information add table d
Page 301 and 302:
Creating a Queue Table Visual Basi
Page 303 and 304:
dbms_aqadm.create_queue_table ( que
Page 305 and 306:
q_table = aq_sess.createQueueTable
Page 307 and 308:
Creating a Queue Table [Set Storage
Page 309 and 310:
Altering a Queue Table PL/SQL (DBMS
Page 311 and 312:
Dropping a Queue Table Figure 9-4 D
Page 313 and 314:
force => TRUE); Java (JDBC): Droppi
Page 315 and 316:
OR OR OR default optional informati
Page 317 and 318:
Creating a queue within a queue tab
Page 319 and 320:
} Creating a multiconsumer queue wi
Page 321 and 322:
Creating a Nonpersistent Queue mess
Page 323 and 324:
See Also: Table 9-1 for a list of a
Page 325 and 326:
Dropping a Queue Figure 9-8 Droppin
Page 327 and 328:
Java (JDBC): Dropping a Queue /* Dr
Page 329 and 330:
Creating a Transformation Usage Not
Page 331 and 332:
Modifying a Transformation Figure 9
Page 333 and 334:
Applying a Transformation Figure 9-
Page 335 and 336:
Dropping a Transformation PL/SQL (D
Page 337 and 338:
Starting a Queue Syntax See Chapter
Page 339 and 340:
Stopping a Queue Figure 9-14 Stoppi
Page 341 and 342:
Java (JDBC): Stopping a Queue /* St
Page 343 and 344:
Granting System Privilege See Chapt
Page 345 and 346:
Revoking System Privilege Figure 9-
Page 347 and 348:
Granting Queue Privilege Figure 9-1
Page 349 and 350:
Revoking Queue Privilege Figure 9-1
Page 351 and 352:
} AQQueue queue; /* Get the queue o
Page 353 and 354:
Purpose Adds a default subscriber t
Page 355 and 356:
* Where the transformation was crea
Page 357 and 358:
agent1 = new AQAgent("East_Shipping
Page 359 and 360:
See Also: Table 9-1 for a list of a
Page 361 and 362:
’AQ.MSG_MAP1’); /* Alter the su
Page 363 and 364:
Purpose Remove a default subscriber
Page 365 and 366:
Scheduling a Queue Propagation Figu
Page 367 and 368:
PL/SQL (DBMS_AQADM): Scheduling a Q
Page 369 and 370:
Unscheduling a Queue Propagation Fi
Page 371 and 372:
} AQAgent agent1; AQAgent agent2; /
Page 373 and 374:
Note: The sys.aq$_message_types tab
Page 375 and 376:
Altering a Propagation Schedule Fig
Page 377 and 378:
eached by the database link another
Page 379 and 380:
Enabling a Propagation Schedule Exa
Page 381 and 382:
Disabling a Propagation Schedule Fi
Page 383 and 384:
} AQQueue queue; AQAgent agent1; AQ
Page 385 and 386:
Purpose Registers an agent for AQ I
Page 387 and 388:
Purpose Alters an agent registered
Page 389 and 390:
PL/SQL: Example not provided. VB (
Page 391 and 392:
Enabling Database Access Examples S
Page 393 and 394:
VB (OO4O): Example not provided. J
Page 395 and 396:
Java (JDBC): Oracle9i Supplied Java
Page 397 and 398:
Removing an Alias from the LDAP Ser
Page 399 and 400:
10 Administrative Interface: Views
Page 401 and 402:
Selecting All Queue Tables in Datab
Page 403 and 404:
Selecting User Queue Tables Figure
Page 405 and 406:
Selecting All Queues in Database Fi
Page 407 and 408:
Selecting All Propagation Schedules
Page 409 and 410:
Purpose This view describes the cur
Page 411 and 412:
Selecting Queues for Which User Has
Page 413 and 414:
Selecting Queues for Which User Has
Page 415 and 416:
Selecting Messages in Queue Table F
Page 417 and 418:
Table 10-8 (Cont.) View for Selecti
Page 419 and 420:
Selecting Queue Tables in User Sche
Page 421 and 422:
Selecting Queues In User Schema Fig
Page 423 and 424:
Selecting Propagation Schedules in
Page 425 and 426:
Purpose Table 10-11 USER_QUEUE_SCHE
Page 427 and 428:
Selecting Queue Subscribers Figure
Page 429 and 430:
Selecting Queue Subscribers and The
Page 431 and 432:
Selecting the Number of Messages in
Page 433 and 434:
Selecting the Number of Messages in
Page 435 and 436:
Selecting the AQ Agents Registered
Page 437 and 438:
Table 10-17 USER_TRANSFORMATIONS Co
Page 439 and 440:
Table 10-19 DBA_TRANSFORMATIONS Col
Page 441 and 442:
11 Operational Interface: Basic Ope
Page 443 and 444:
Table 11-1 (Cont.) Use Case Model:
Page 445 and 446:
Purpose Adds a message to the speci
Page 447 and 448:
See Also: Purpose To specify the op
Page 449 and 450:
Enqueuing a Message [Specify Messag
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Enqueuing a Message [Add Payload] S
Page 457 and 458:
DBMS_AQ.ENQUEUE(queue_name => ’ms
Page 459 and 460:
} Enqueuing a Message [Add Payload]
Page 461 and 462:
} raw_payload.setStream(b_array, b_
Page 463 and 464:
Listening to One or More Single-Con
Page 465 and 466:
Listen to Single-Consumer Queue (Ti
Page 467 and 468:
} Listening to One or More Single-C
Page 469 and 470:
OCIEnvInit( &envhp, (ub4) OCI_DEFAU
Page 471 and 472:
} Listening to One or More Single-C
Page 473 and 474:
OCIEnvInit( &envhp, (ub4) OCI_DEFAU
Page 475 and 476:
Listening to One or More Multiconsu
Page 477 and 478:
Listening to One or More Multiconsu
Page 479 and 480:
} Listening to One or More Multicon
Page 481 and 482:
OCIEnv *envhp; OCIServer *srvhp; OC
Page 483 and 484:
} printf("MESSAGE for :- \n"); GetA
Page 485 and 486:
Usage Notes Search criteria and deq
Page 487 and 488:
Dequeuing a Message from a Single-C
Page 489 and 490:
Dequeuing a Message from a Single-C
Page 491 and 492:
' of "RELATIVE_MSG_ID" Q.Navigation
Page 493 and 494:
See Also: Dequeuing a Message from
Page 495 and 496:
Registering for Notification Figure
Page 497 and 498:
PL/SQL (DBMS_AQ Package): Not avail
Page 499 and 500:
Registering for Notification [Speci
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Posting for Subscriber Notification
Page 509 and 510:
Adding an Agent to the LDAP Server
Page 511 and 512:
Removing an Agent from the LDAP Ser
Page 513 and 514:
12 Creating Applications Using JMS
Page 515 and 516:
J2EE Compliance General Features of
Page 517 and 518:
JMS Connection and Session General
Page 519 and 520:
General Features of JMS To connect
Page 521 and 522:
General Features of JMS A JMS Conne
Page 523 and 524:
General Features of JMS acknowledg
Page 525 and 526:
General Features of JMS There are t
Page 527 and 528:
alter() - alters a queue or topic G
Page 529 and 530:
General Features of JMS CREATE USER
Page 531 and 532:
General Features of JMS backed_orde
Page 533 and 534:
General Features of JMS /* Check in
Page 535 and 536:
General Features of JMS JMS time st
Page 537 and 538:
Table 12-1 Message Header Fields Me
Page 539 and 540:
General Features of JMS Stream Mess
Page 541 and 542:
General Features of JMS Object Mess
Page 543 and 544:
JMS_OracleDelay JMS_OracleOriginalM
Page 545 and 546:
public String getRegion() { return
Page 547 and 548:
eturn quantity; } } /* * BolBook -
Page 549 and 550:
} this.custid = custid; this.name =
Page 551 and 552:
Queue Sender JMS Point-to-Point Mod
Page 553 and 554:
try { JMS Point-to-Point Model Feat
Page 555 and 556:
JMS Publish-Subscribe Model Feature
Page 557 and 558:
Durable Subscriber JMS Publish-Subs
Page 559 and 560:
Example Code JMS Publish-Subscribe
Page 561 and 562:
JMS Publish-Subscribe Model Feature
Page 563 and 564:
TopicReceiver } System.out.println(
Page 565 and 566:
Topic Browser } obj_message = (Obje
Page 567 and 568:
} TopicBrowser browser; Topic topic
Page 569 and 570:
JMS Message Producer Features Examp
Page 571 and 572:
Time Specification - Delay } "OE_bo
Page 573 and 574:
JMS Message Producer Features Examp
Page 575 and 576:
JMS Message Producer Features The m
Page 577 and 578:
} sender.send(obj_message); } catch
Page 579 and 580:
} ObjectMessage obj_message; BolCus
Page 581 and 582:
Message Navigation in Receive } new
Page 583 and 584:
int new_orders = 1; try { JMS Messa
Page 585 and 586:
JMS Message Consumer Features This
Page 587 and 588:
JMS Message Consumer Features The m
Page 589 and 590:
} } try { /* cast to JMS Object Mes
Page 591 and 592:
{ } /* cast to JMS Object Message *
Page 593 and 594:
JMS Message Consumer Features The m
Page 595 and 596:
} } JMS Propagation 3. Receive expi
Page 597 and 598:
JMS Propagation oe_ws from database
Page 599 and 600:
* Create local subscriber - for pri
Page 601 and 602:
JMS Propagation When a schedule is
Page 603 and 604:
Maximum number of bytes propagated
Page 605 and 606:
Message Transformation with JMS AQ
Page 607 and 608:
Message Transformation with JMS AQ
Page 609 and 610:
} Message Transformation with JMS A
Page 611 and 612:
} Message Transformation with JMS A
Page 613 and 614:
13 JMS Administrative Interface: Ba
Page 615 and 616:
Use Case Model: JMS Administrative
Page 617 and 618:
Registering a Queue/Topic Connectio
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Unregistering a Queue/Topic Connect
Page 627 and 628:
Unregistering a Queue/Topic Connect
Page 629 and 630:
Getting a Queue Connection Factory
Page 631 and 632:
Getting a Queue Connection Factory
Page 633 and 634:
Getting a Topic Connection Factory
Page 635 and 636:
Getting a Topic Connection Factory
Page 637 and 638:
Getting a Queue/Topic Connection Fa
Page 639 and 640:
Getting a Queue/Topic in LDAP Figur
Page 641 and 642:
See Also: Table 13-1 for a list of
Page 643 and 644:
Getting a Queue Table Figure 13-15
Page 645 and 646:
Specifying Destination Properties F
Page 647 and 648:
Creating a Queue—Point-to-Point F
Page 649 and 650:
Creating a Topic—Publish-Subscrib
Page 651 and 652:
Granting System Privileges Figure 1
Page 653 and 654:
Page 655 and 656:
Purpose Grant a topic privilege in
Page 657 and 658:
Revoking Topic Privileges—Publish
Page 659 and 660:
Purpose Grant a queue privilege in
Page 661 and 662:
Purpose Revoke queue privilege in t
Page 663 and 664:
Starting a Destination Usage Notes
Page 665 and 666:
Purpose Stop a destination. Stoppin
Page 667 and 668:
Syntax See Java (JDBC): Oracle9i Su
Page 669 and 670:
TopicSession t_sess; Topic topic; (
Page 671 and 672:
Enabling a Propagation Schedule Fig
Page 673 and 674:
Altering a Propagation Schedule Fig
Page 675 and 676:
Disabling a Propagation Schedule Fi
Page 677 and 678:
Page 679 and 680:
14 JMS Operational Interface: Basic
Page 681 and 682:
Creating a Queue Connection with Us
Page 683 and 684:
See Also: Purpose Create a queue co
Page 685 and 686:
Creating a Queue Connection with an
Page 687 and 688:
Creating a Queue Session Figure 14-
Page 689 and 690:
Sending a Message Using a Queue Sen
Page 691 and 692:
Sending Messages Using a Queue Send
Page 693 and 694:
Creating a Queue Browser for Queues
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Browsing Messages Using a Queue Bro
Page 703 and 704:
Creating a Queue Receiver for Queue
Page 705 and 706:
Creating a Queue Receiver for Queue
Page 707 and 708:
Creating a Queue Connection with an
Page 709 and 710:
Page 711 and 712:
Use Case Model: JMS Operational Int
Page 713 and 714:
Usage Notes Not applicable. Creatin
Page 715 and 716:
Creating a Topic Connection with De
Page 717 and 718:
Creating a Topic Connection with an
Page 719 and 720:
Syntax Java (JDBC): Oracle9i Suppli
Page 721 and 722:
See Also: Publishing a Message Usin
Page 723 and 724:
Publishing a Message Using a Topic
Page 725 and 726:
Page 727 and 728:
See Also: Publishing a Message Usin
Page 729 and 730:
Page 731 and 732:
Page 733 and 734:
Creating a Durable Subscriber for a
Page 735 and 736:
See Also: Purpose Create a durable
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Example Creating a Durable Subscrib
Page 743 and 744:
Creating a Remote Subscriber for To
Page 745 and 746:
Creating a Remote Subscriber for To
Page 747 and 748:
Example Creating a Remote Subscribe
Page 749 and 750:
Unsubscribing a Durable Subscriptio
Page 751 and 752:
Unsubscribing a Durable Subscriptio
Page 753 and 754:
Creating a Topic Receiver for a Top
Page 755 and 756:
See Also: Creating a Topic Receiver
Page 757 and 758:
Creating a Topic Browser for Topics
Page 759 and 760:
Page 761 and 762:
See Also: Creating a Topic Browser
Page 763 and 764:
Page 765 and 766:
Browsing Messages Using a Topic Bro
Page 767 and 768:
Page 769 and 770:
Use Case Model: JMS Operational Int
Page 771 and 772:
Starting a JMS Connection Figure 16
Page 773 and 774:
Usage Notes Not applicable. Committ
Page 775 and 776:
See Also: Purpose Rollback All Oper
Page 777 and 778:
Getting the Underlying OracleOCICon
Page 779 and 780:
Creating a Map Message Usage Notes
Page 781 and 782:
Creating a Stream Message Figure 16
Page 783 and 784:
Creating a Text Message Refer to Ja
Page 785 and 786:
Creating a JMS Message Figure 16-12
Page 787 and 788:
Creating an ADT Message Syntax See
Page 789 and 790:
Specifying Message Correlation ID F
Page 791 and 792:
Specifying JMS Message Property Fig
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Setting Default TimeToLive for All
Page 813 and 814:
Setting Default Priority for All Me
Page 815 and 816:
Usage Notes Not applicable. Creatin
Page 817 and 818:
Receiving a Message Synchronously U
Page 819 and 820:
Specifying the Navigation Mode for
Page 821 and 822:
Specifying a Message Listener to Re
Page 823 and 824:
Specifying a Message Listener to Re
Page 825 and 826:
Getting the Correlation ID of a Mes
Page 827 and 828:
Purpose Get the Message ID of a Mes
Page 829 and 830:
Getting the JMS Message Property Fi
Page 831 and 832:
See Also: Purpose Get the Message P
Page 833 and 834:
Purpose Get the Message Property as
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
Getting the JMS Message Property as
Page 841 and 842:
See Also: Purpose Get the Message P
Page 843 and 844:
Page 845 and 846:
Closing a Message Producer Figure 1
Page 847 and 848:
Stopping a JMS Connection Figure 16
Page 849 and 850:
See Java (JDBC): Oracle9i Supplied
Page 851 and 852:
Usage Notes Not applicable. Getting
Page 853 and 854:
See Also: Purpose Get the Error Mes
Page 855 and 856:
Printing the Stack Trace for the JM
Page 857 and 858:
Getting the Exception Listener Usag
Page 859 and 860:
Setting the Ping Period for the Exc
Page 861 and 862:
Getting the Ping Period for the Exc
Page 863 and 864:
17 Internet Access to Advanced Queu
Page 865 and 866:
Figure 17-2 Architecture for Perfor
Page 867 and 868:
SOAP Method Invocation The Internet
Page 869 and 870:
Notifications from the server to th
Page 871 and 872:
Message Payloads AQ supports messag
Page 873 and 874:
Required elements are shown in bold
Page 875 and 876:
scott 100 NEW URGENT EAST 1001
Page 877 and 878:
scott 1111 Mary 5000 1996-01-01
Page 879 and 880:
1 1 toyota john scott aqus
Page 881 and 882:
scott The Internet Data Access P
Page 883 and 884:
The Internet Data Access Presentati
Page 885 and 886:
Page 887 and 888:
The Internet Data Access Presenta
Page 889 and 890:
Rollback Request Example A rollback
Page 891 and 892:
. The Internet Data Access Presenta
Page 893 and 894:
Page 895 and 896:
Example A FAULT message has the fol
Page 897 and 898:
IDAP Schema 'http://schemas.xmlsoap
Page 899 and 900:
SOAP and AQ XML Schemas
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
Page 907 and 908:
Page 909 and 910:
Page 911 and 912:
Deploying the AQ XML Servlet The AQ
Page 913 and 914:
User Authentication $ORACLE_HOME/li
Page 915 and 916:
Deploying the AQ XML Servlet Mappin
Page 917 and 918:
} Hashtable env = new Hashtable(5,
Page 919 and 920:
Deploying the AQ XML Servlet 2. Cre
Page 921 and 922:
Using HTTP to Access the AQ XML Ser
Page 923 and 924:
Using HTTP to Access the AQ XML Ser
Page 925 and 926:
Figure 17-3 HTTP Advanced Queuing P
Page 927 and 928:
. Map the AQ agent to a database us
Page 929 and 930:
} db_drv.getCacheSize(10); this.set
Page 931 and 932:
Customizing the AQ Servlet The void
Page 933 and 934:
} this.setAQDataSource(db_drv); /*
Page 935 and 936:
18 Messaging Gateway Messaging Gate
Page 937 and 938:
Messaging Gateway Architecture For
Page 939 and 940:
Gateway Agent Propagation Processin
Page 941 and 942:
1. Loading Database Objects into th
Page 943 and 944:
Modifying tnsnames.ora: Example MGW
Page 945 and 946:
Setup Verification Creating a Messa
Page 947 and 948:
Working with Messaging Gateway desc
Page 949 and 950:
The following command shuts down th
Page 951 and 952:
end; Working with Messaging Gateway
Page 953 and 954:
Working with Messaging Gateway The
Page 955 and 956:
The propagation type (inbound or ou
Page 957 and 958:
end; Working with Messaging Gateway
Page 959 and 960:
Working with Messaging Gateway inst
Page 961 and 962: Converting Messages Converting Mess
Page 963 and 964: Messaging Gateway Canonical Types C
Page 965 and 966: Converting Messages An AQ payload o
Page 967 and 968: Converting Messages The MQSeries fi
Page 969 and 970: Converting Messages Advanced Queuin
Page 971 and 972: Table 18-4 Messaging Gateway Names
Page 973 and 974: Table 18-5 MQSeries Header Default
Page 975 and 976: queue_name => ’AQ_book_orders’,
Page 977 and 978: Converting Messages Propagating Inb
Page 979 and 980: File Contents Initialization Parame
Page 981 and 982: Format: set CLASSPATH= The mgw.ora
Page 983 and 984: A Oracle Advanced Queuing by Exampl
Page 985 and 986: - Managing Propagation From One Que
Page 987 and 988: Creating a Queue Table and Queue of
Page 989 and 990: Creating an Java AQ Session Creatin
Page 991 and 992: Creating a Queue and Start Enqueue/
Page 993 and 994: Enqueuing and Dequeuing Of Messages
Page 995 and 996: EXEC SQL CONNECT :user; /* On an or
Page 997 and 998: { OCIEnv *envhp; OCIServer *srvhp;
Page 999 and 1000: public static void AQObjectPayloadT
Page 1001 and 1002: this.empNo = empNo; } ////// implem
Page 1003 and 1004: } /* Enqueue a message in test_queu
Page 1005 and 1006: void sql_error(msg) char *msg; { EX
Page 1007 and 1008: } Enqueuing and Dequeuing of RAW Ty
Page 1009 and 1010: } /* Get a handle to a queue - aq_q
Page 1011: AQRawPayload raw_payload; AQEnqueue
Page 1015 and 1016: } } else m_property.setPriority(3);
Page 1017 and 1018: and remove RED from queue: */ DECLA
Page 1021 and 1022: char subject[30]; /* components of
Page 1023 and 1024: * Bind the host variable ’message
Page 1025 and 1026: int main() { OCIEnv *envhp; OCIServ
Page 1027 and 1028: ecipients DBMS_AQ.aq$_recipient_lis
Page 1029 and 1030: WHEN no_messages THEN DBMS_OUTPUT.P
Page 1031 and 1032: OCIEnvInit( &envhp, (ub4) OCI_DEFAU
Page 1035 and 1036: dequeue_options.navigation := DBMS_
Page 1037 and 1038: SELECT t.user_data.data INTO lob_lo
Page 1039 and 1040: Connection db_conn = null; AQEnqueu
Page 1043 and 1044: } Thread.sleep(30000); // dequeue m
Page 1045 and 1046: END; BEGIN DBMS_AQADM.SCHEDULE_PROP
Page 1047 and 1048: queue_name => ’q1def’, destinat
Page 1049 and 1050: EXECUTE DBMS_AQADM.DROP_QUEUE ( que
Page 1051 and 1052: * XA open string */ char xaoinfo[]
Page 1053 and 1054: Deploying AQ with XA envhp = xaoEnv
Page 1055 and 1056: #include #endif #include static v
Page 1057 and 1058: ub4 buflen; OCIInitialize((ub4) OCI
Page 1059 and 1060: struct message { OCINumber id; OCIS
Page 1061 and 1062: AQ and Memory Usage OCIHandleAlloc(
Page 1063 and 1064:
OCIInd null_adt; OCIInd null_id; OC
Page 1065 and 1066:
(ub4) OCI_ATTR_SERVER, (OCIError *)
Page 1067 and 1068:
LNOCIError *errhp; LNOCISvcCtx *svc
Page 1069 and 1070:
OCIAttrSet((dvoid *)svchp, (ub4)OCI
Page 1071 and 1072:
B Oracle JMS Interfaces, Classes, a
Page 1073 and 1074:
Table B-1 (Cont.) Interfaces, Class
Page 1075 and 1076:
Oracle JMSClasses (part 1) Figure B
Page 1077 and 1078:
Oracle JMS Classes (part 2) Figure
Page 1079 and 1080:
Page 1081 and 1082:
Page 1083 and 1084:
See Also: "Interface - javax.jms.M
Page 1085 and 1086:
Page 1087 and 1088:
Page 1089 and 1090:
See Also: "Interface - javax.jms.Q
Page 1091 and 1092:
Oracle JMS Classes (part 10 continu
Page 1093 and 1094:
readBoolean() readByte() readBytes(
Page 1095 and 1096:
See Also: "Oracle JMSClasses (part
Page 1097 and 1098:
setDouble(String, double) setFloat(
Page 1099 and 1100:
Page 1101 and 1102:
See Also: "Oracle JMS Classes (par
Page 1103 and 1104:
Page 1105 and 1106:
close() commit() createBytesMessage
Page 1107 and 1108:
writeString(String) Interface - jav
Page 1109 and 1110:
Page 1111 and 1112:
getErrorCode() getLinkedException()
Page 1113 and 1114:
getNavigationMode() receiveNoData()
Page 1115 and 1116:
getAdtPayload() setAdtPayload(Custo
Page 1117 and 1118:
STATE_WAITING TRANSACTIONAL WAIT_FO
Page 1119 and 1120:
INFINITE NORMAL_QUEUE > AQjmsDestin
Page 1121 and 1122:
Page 1123 and 1124:
Class - oracle.jms.AQjmsSession > o
Page 1125 and 1126:
Interfaces, Classes, and Exceptions
Page 1127 and 1128:
Exception oracle.jms.AQjmsMessageEO
Page 1129 and 1130:
setPrimaryInstance(int inst) setSec
Page 1131 and 1132:
C Scripts for Implementing BooksOnL
Page 1133 and 1134:
tkaqdoca.sql: Script to Create User
Page 1135 and 1136:
Page 1137 and 1138:
Page 1139 and 1140:
Page 1141 and 1142:
Page 1143 and 1144:
Page 1145 and 1146:
Page 1147 and 1148:
connect CS/CS tkaqdocd.sql: Example
Page 1149 and 1150:
wait_time INTEGER := 120; no_messag
Page 1151 and 1152:
tkaqdoce.sql: Operational Examples
Page 1153 and 1154:
tkaqdocp.sql: Examples of Operation
Page 1155 and 1156:
egin end; dopt.consumer_name := con
Page 1157 and 1158:
end; / show errors; tkaqdocp.sql: E
Page 1159 and 1160:
grant execute on shipping_bookedord
Page 1161 and 1162:
Page 1163 and 1164:
Page 1165 and 1166:
end; / show errors; tkaqdocp.sql: E
Page 1167 and 1168:
tkaqdocc.sql: Clean-Up Script tkaqd
Page 1169 and 1170:
D JMS and AQ XML Servlet Error Mess
Page 1171 and 1172:
JMS Error Messages Cause: An attemp
Page 1173 and 1174:
JMS Error Messages Action: The vali
Page 1175 and 1176:
JMS Error Messages Cause: An attemp
Page 1177 and 1178:
JMS-163 Message not Writeable Cause
Page 1179 and 1180:
JMS Error Messages Action: Specify
Page 1181 and 1182:
JMS Error Messages Cause: There is
Page 1183 and 1184:
AQ XML Servlet Error Messages JMS-4
Page 1185 and 1186:
Action: The valid navigation modes
Page 1187 and 1188:
Action: Specify a valid data source
Page 1189 and 1190:
E Unified Modeling Language Diagram
Page 1191 and 1192:
Use Case Diagrams As shown in Figur
Page 1193 and 1194:
equires that you first create a te
Page 1195 and 1196:
Figure E-9 Required and Optional Op
Page 1197 and 1198:
State Diagrams Figure E-11 A Class
Page 1199 and 1200:
A access control. See system-level
Page 1201 and 1202:
features, 8-58 message navigation,
Page 1203 and 1204:
Interface - javax.jms.TopicSession,
Page 1205 and 1206:
operational interface basic operati
Page 1207 and 1208:
R basic, 7-3 basic, one producer, o
Page 1209 and 1210:
V view, 10-1 attributes, 10-1 views
show all

Advanced Queuing - Oracle

Create successful ePaper yourself

Delete template?

Save as template?