InstallShield 2012 Spring Express Edition User Guide

• General
• Home Directory
• Application Settings
• Security
• Advanced
Chapter 24: View Reference
Configure the Target System View
Identification Settings
The following settings are available in the Identification area for a Web site in the Internet Information
Services view.
Table 24-34: Identification Settings for a Web Site
Setting Description
Name Enter a name for the Web site.
IP Address To target a specific IP address, enter it.
As an alternative, you can leave an asterisk (*), which is the default value. An asterisk or
a blank value for this setting indicates that any unused IP address should be used.
TCP Port The TCP Port setting for an IIS Web site indicates the port number on which the service
is running on the target machine. Some versions of the IIS Web server can host multiple
Web sites. Each Web site is associated with a unique port number.
If you do not know what the port number on the target system should be, you can enter
0 for this setting.
To learn which port and site numbers are used for the Web site when it is installed, see
Configuring the TCP Port and Site Numbers.
Host Header Name To specify the host header name that identifies the IIS Web site that is installed during
your installation, type it in this box. For example:
www.mycompany.com
Host headers (also known as domain names) enable you to assign more than one Web
site to an IP address on a Web server.
Site Number The Site Number setting indicates the number in the path at which the Web site will be
created (that is, w3svc/3). The default value is 0.
If you do not know what the site number on the target system should be, you can enter 0
for this setting.
To learn which port and site numbers are used for the Web site when it is installed, see
Configuring the TCP Port and Site Numbers.
InstallShield 2012 Spring Express Edition User Guide ISE-1900-UG00 549