fog fluid - Elation Professional

UNI BAR
Sku# unIBAR
. 3-pin XLR DMX In/OuT ports
. Serves as a Switch or Dimmer Pack depending upon the set
operating mode
. USITT Standard DMx512
. 4 digits Segment Display shows current activity and
function state
. Power failure memory
. Dimmer Preset and Dimmer Limit settings
. 120VAC-60Hz power input
. 10 Amp maximum channel output
. 10 Amp 250V 5x20mm fuse
. Weight - 2.5lbs.
. Dimensions - 7.90 x 3.250 x 2.650
. On board HTP dimmer control
. Input for optional analog HTP dimmer controller
PRO BAR 4
Sku# PROBAR4
PROFESSIONAL 4 CHANNEL DMx BAR
. 16 built in Chase Patterns
. Switchable dimmer / power pack modes
. DMx control activates 4 channel manual dimmer mode to be
controlled by external DMx controller
. Pre-heat function
. Adjustable master dim level
. Adjustable channel dim level
. Individual DMx addressing for each channel
. Built in microphone for music sync function
. Digital display- used to set starting DMx address channel and set
all other menu options.
. Two three prong Edison sockets per channel
. One constant / dual three prong Edison socket
. 3 pin xLR DMx Input & Output
. External channel fuses for quick and easy replacement
. Zero crossing circuitry for protection of transformer loads when
switching
. One 3 pin xLR foot controller input
. 6 mounting knobs for Par Cans
. 2 eye hooks for aerial rigging
. 1 adapter for stand mount (For use with LTS-10 stand)
. Optional foot controller model Bar-FS (sold separately)
. Power Input: 120V ~ 60Hz
. Maximum Load: 5A per channel / 20A total
. Dimensions: 3”L x 51.75”W x 7”H
. Weight: 11.5 lbs)
LTS-10B
STAnD
Specifications subject to change without notice.
97