HDS 1000 DE - Endress & Reiser

More documents

Recommendations

Info

HDS 1000 DE VII. General Notes 1. System test pressure and design accord with the statutory regulations for steam boilers. 2. The “Richtlinien für Flüssigkeitsstrahler” (Guidelines for liquid jets) issued by the Verband der gewerblichen Berufsgenossenschaften, available from Carl Heymanns-Verlag KG, Luxemburger Str. 449, 5000 Köln 41, apply in the Federal Republic of Germany. 3. In accordance with the “Richtlinien der Flüssigkeitsstrahler” (paragraph VI.1.), high-pressure jets must be inspected at least every 12 months by an expert; the results of the inspection must be put in writing. Kärcher Customer Service maintenance engineers are experts and can carry out this prescribed inspection at your premises. 4. The volume of water in the unit amounts to less than 10 litres. The unit is therefore subject to no installation regulations as far as the boiler is concerned. When operating with temperatures of over 100 °C in unsupervised operation, the burner must be fitted with a flame monitoring system. Regulations of the local building authorities should be observed. 5. The heating facility is a furnace which, according to the first ordinance for the implementation of the Federal law on the protection against noxious emissions, must be checked once a year for its adherence to emission control values by your area chimney sweep responsible for such tasks. The operator of the high-pressure cleaner must arrange for the measurement to take place. 6. Safety inspection agreement You can enter into a safety inspection agreement with Kärcher. This includes the inspection with inspection badge and inspection record as required under VII.3. and VII.5. 7. Maintenance agreement You can also enter into a maintenance agreement with Kärcher. It involves all the care and maintenance operations as in V.1. Maintenance Schedule. The maintenance agreement contains in it the safety inspection agreement. 8. Accessories Wrong, unsuitable or defective accessories impair the functioning of your Kärcher unit. Their use is dangerous. Ask us or your dealer about suitable and tested accessories. A Kärcher original accessory is practical and tailor-made. 9. Spare parts Be aware that the use of other than original spare parts can lead to the occurrence of faults and also to bad accidents when these parts have not been manufactured properly, or when they do not exactly replace the original part. They can also make the operation of the unit unreliable. Original spare parts offer the guarantee that you will always be able to operate your unit safely and free of faults. You will find the numbers of a selection of the most commonly required replacement parts on the back cover. 14
HDS 1000 DE 1.811-936.0 5.063-664.0 5.731-039.0 5.321-177.0 7.307-181.0 5.132-010.0 5.132-010.0 7.305-023.0 5.045-211.0 5.321-023.0 4.820-946.0 4.760-355.0 5.363-300.0 6.303-025.0 6.654-074.0 6.654-026.0 2.880-296.0 5.401-210.0 5.321-493.0 5.826-020.0 6.654-075.0 4.820-732.0 5.321-493.0 4.760-355.0 5.826-020.0 4.775-254.0 5.042-252.0 6.491-261.0 6.491-262.0 5.042-402.0 2.880-296.0 6.390-185.0 6.362-422.0 6.390-185.0 6.390-185.0 10.12.1999
Page 1: 5.959-083 06/01 HDS 1000 DE
Page 4 and 5: HDS 1000 DE I. Technical data Engin
Page 6 and 7: HDS 1000 DE II. Important notes Unp
Page 8 and 9: HDS 1000 DE III. Operation 1. Initi
Page 10 and 11: HDS 1000 DE V. Care and maintenance
Page 12 and 13: HDS 1000 DE VI. Trouble shooting Fa

HDS 1000 DE - Endress & Reiser

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?