MC5716 Technical Specification ZTE CORPORATION - wless.ru
MC5716 Technical Specification ZTE CORPORATION - wless.ru
MC5716 Technical Specification ZTE CORPORATION - wless.ru
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Voice call<br />
2 data<br />
4 fax<br />
8 sms<br />
5.11 ^CPIN<br />
5.11.1 Syntax<br />
Command Possible response(s)<br />
^CPIN=<br />
[,]<br />
OK<br />
Upon an error relating to MT:<br />
+CME ERROR: <br />
III<br />
<strong>MC5716</strong> <strong>Technical</strong> <strong>Specification</strong><br />
^CPIN? ^CPIN:,[],,,,OK<br />
Upon an error relating to MT:<br />
+CME ERROR: <br />
^CPIN=? OK<br />
5.11.2 Interface<br />
5.11.3 Value<br />
READ command is used to indicate if there is password request and the remaining calibration<br />
times. SET command is used to verify, unlock PIN and PIN2. if the current password is<br />
PIN or PIN2, input +CPIN= to verify. If the current password is PUK or PUK2, input<br />
+CPIN=, to unlock. The first parameter is SIM PUK or SIM PUK2; the<br />
second parameter, , is new PIN or PIN2. When using SET command, if there is<br />
no PIN request, return +CME ERROR. Note: upon emergency calls, calibrating PIN or<br />
PUK might cause the termination of emergency calls.<br />
, character string type, must add the quotation mark. The character can only select<br />
from ~ ; otherwise, directly return ERROR.<br />
character string type(no quotation mark)<br />
READY MT has no password request.<br />
SIM PIN UICC/SIM PIN password request<br />
SIM PUK UICC/SIM PUK password request, used to unlock SIM PIN<br />
SIM PIN2 PIN2 password request (the version doesn’t temporarily support the<br />
protected function)<br />
SIM PUK2 PUK2 password request, used to unlock SIM PIN2