Compact Linear Actuator with Ball Screw Drive - Schaeffler Group

Compact linear actuator
with ball screw drive
Features Compact linear actuators MKUVS32 comprise a support rail,
one or two carriages guided in the support rail and a high precision
ball screw drive.
The carriage is guided in the support rail by means of two or four
linear recirculating ball bearing units KUVS32.
Due to their wide base and small height, the linear actuators of
the SLIVER series allow high performance within compact
dimensions.
These linear actuators allow accelerations of up to 30 m/s 2
and travel speeds of up to 1 m/s.
The maximum stroke length is 1022 mm.
Applications The compact linear actuators can support forces from all directions
and moments about all axes. They offer high load carrying capacity
with high precision.
They are highly suitable for applications in:
■ assembly systems, for example in semiconductor production
■ inspection and measurement systems
■ medical equipment
■ electronic component manufacture
■ handling systems
■ automatic welding equipment.
Sealing In order to protect the linear guidance system and drive spindle
against contamination, linear actuators MKUVS32 can be supplied
with strip covers made from alloy sheet steel (suffix ADA).
In this design, the carriages are produced with a covering strip guide
on both end faces. As a result, the stroke length is reduced.
6 TPI 181 Schaeffler Group Industrial