Product Catalogue 2017 | Mahn Medizinprodukte GmbH

58
X-RAY QUALITY
QUALITY CONTROL OF FILM PROCESSING | CONSTANCY CHECK
Similar to illustration.
SENSITOMETER SENSIX | 815100
Sensitometer for exposure of a reproducible 21 step grey scale wedge
onto a X-ray film. Operated by rechargeable batteries.
Light sources:
• Blue: films of max 460nm
• Green: films of max 500nm
• Exposure: 21 steps each 5×10mm
• Density steps: 0,0 - 3,0 D
• Increments: 0,15 D
• Dimensions: 212 × 58 × 130 mm (w/d/h)
IEC 61223-2-1, IEC 61674, DIN 6868-2
Similar to illustration.
DENSITOMETER DENSIX | 817100
Digital densitometer for optical density measurements of X-ray films.
Including calibrated single step reference film.
Power supply 819050 required.
• Display: 3-digit LCD display
• Measuring range: 0,0 - 4,5 OD
• Resolution: 0,02 D
• Battery indicator: polarity and „Lo-Bat”
• Dimensions: 240 × 100 × 110mm. (w/h/d)
IEC 61223-2-1/ -2/ -3/ -4, IEC 61223-2-9/ -10/ -11, DIN EN IEC 61223-3-1/ -2/ -3/ -4, IEC 61674, DIN
6868-1/ -2/ -3/ -4/ -5/ -7
CONNY II – DIGITAL DOSEMETER | 820000
Compact diagnostic X-ray quality control dosemeter for routine constancy
tests of conventional radiography, fluoroscopy and mammography
installations. Measuring dose and dose rate in Gy, Gy/s and time in
sec. shown on digital LCD display. Auto-start, shut-off, reset and timer
functions. Measuring of patients entrance dose and entrance dose rate
in combination with a measuring phantom. Unit is calibrated in air kerma.
Operated by rechargeable batteries.
• Measuring ranges: 70/100 kV conventional, fluoroscopy | 30 kV mammography
• Dose: 2 mGy - 9,999 Gy
– resolution: 20 nGy - 5 mGy
• Dose rate: 5 mGy/s - 500 mGy/s
– resolution: 50 nGy/s - 10 μGy/s
• Irradiation time: 1 - 999,9 sec
– resolution: 10 ms
Similar to illustration.
IIEC 61674, DIN 6868-3, DIN 6868-4, DIN 6868-7,DIN 6868-13
Instrument to be used in combination with a phantom:
REX, NORMI 13, NORMI MAM or NORMI PAS (not included)
STATUS: NOVEMBER 2017