ENGINE INTELLIGENCE. HUMAN EXPERTISE. Powered by advanced analytics, Pratt & Whitney experience, and your fleet expertise. Our shared insights become your most valuable assets. Learning. Building. Sharing. ALL TOGETHER, SMARTER. Enginewise.com A UNITED TECHNOLOGIES COMPANY
<strong>MRO</strong> and Production News 7 to include CASA Part 145 approval to meet the growing demands from its customer base. This latest offering complements the existing portfolio at KLM UK Engineering’s base maintenance facility, where it can maintain five lines of heavy maintenance, provide onsite workshop support, and operate a technical training college delivering Part 147. GAMECO’S first A380 6-year check in China Photo: GAMECO GAMECO accomplishes first A380 6-year check in China On Jun 2, China Southern Airlines (CSA) B-6016, the first A380 with a 6-Year check, was redelivered for service with a bright new look for the cabin and airframe after heavy maintenance and repainting, also symbolizing GAMECO’s milestone of the first A380 6-Year Check in China. In 2011, CSA started introducing the A380 to its fleet. After 6-years of operation, CSA’s five A380s will successively move forward to a full-scale “physical check”. On Mar 1,<strong>2017</strong>, the first domestic A380 3C check (6-year check) began in the GAMECO Hangar. After a 75-day heavy check and 19 days repainting, the aircraft was redelivered on Jun 2, <strong>2017</strong>. The 6-year check covers a wide scope of tasks, including more than 1250 job cards and over 120 EO MODs, with an average 90 mechanics working on the aircraft every day, and even up to 140 mechanics for peak hours. Aircraft parts on the upper floor and lower floor of the cabin were all removed for refurbishment, including 18 galleys, 14 lavatories, 5<strong>06</strong> seats, and thousands of accessories being painted, polished or replaced. The whole cabin is now ready to welcome passengers with a new look. KLM UK Engineering adds CASA Part 145 approval to maintain Australian registered aircraft KLM UK Engineering has added CASA Part 145 approval to its portfolio from June <strong>2017</strong>. A European leader in the regional jets & narrow-body aircraft market, and having internationally acknowledged expertise on the Embraer 170/190, BAe146/Avro RJ, Fokker 70/100, Boeing 737 & Airbus A320 Family, KLM UK Engineering has extended its services Aero Norway granted Part-145 Approved Maintenance Organization Certificate by DGCA Indonesia Norway-based engine <strong>MRO</strong> facility Aero Norway AS has been granted Part-145 Approved Maintenance Organization Certificate by the Directorate General of Civil Aviation (DGCA) Indonesia. The engine <strong>MRO</strong> centre is now multi-release FAA, EASA, TCCA, CAAC, GCAA and DGCA Indonesia certified. The certification covers the full spectrum of services offered by CFM-authorized repair station Aero Norway across all three engine models: CFM56-3, CFM56-5B and CFM56-7B. West Star Aviation’s new dedicated landing gear facility officially open for business West Star Aviation has reported that its new dedicated landing gear facility, located in Grand Junction, CO is now officially open for business. West Star Aviation celebrated the grand opening with an open house at the facility on May 26, <strong>2017</strong>. The newly redesigned 20,000 ft². facility was acquired by West Star in February of <strong>2017</strong> and will allow West Star to continue supporting Challenger, Hawker, and Embraer Phenom landing gear overhaul and repair. 24/7 READY TO SERVE AROUND THE WORLD Maintenance. Repair. Overhaul. Engines. Airframes. Avionics. Dynamic Components Learn More <strong>AviTrader</strong> <strong>MRO</strong> - June <strong>2017</strong>