Views
9 months ago

catalog-2017

CONTINUOUS HINGES

CONTINUOUS HINGES Standard Lengths Special Lengths Standard Finishes Fire Ratings - Underwriters Laboratory Fire Rating FIRE RATED CAL-ROYAL FULL CONCEALED HALF SURFACE FULL SURFACE SURFACE FULL SURFACE * Devices for which Studs are required Cal-Royal up to and including 3 hours. Wood composite doors rated up to and including 1½ hours. Fully Concealed the frame and the hinge edge of the door. Models available: CRHD781110, CRHD781120, CRHD782240 Full Surface - These models have the frame leaf mounted to the face of the frame and the face of the door. The door leaf is mounted to the door Models available: CRHD780570, CRHD781570, CRHD782100 Half Surface the rabbet of the frame and the edge of the door. The door leaf is mounted 19

  • Page 3:

    September 2017 TO OUR VALUED CUSTOM

  • Page 6 and 7:

    HINGES / NRP HINGES • NEW FINISHE

  • Page 8 and 9:

    BUILDERS HARDWARE • MOVED Auto Fl

  • Page 10 and 11:

    To Whom It may Concern,

  • Page 12 and 13:

    Cal-Royal Products, Inc. 2. Section

  • Page 14 and 15:

    Cal-Royal Products, Inc. is now Flo

  • Page 16 and 17:

    TERMS AND CONDITIONS FOR CAL-ROYAL

  • Page 18 and 19:

    Product Warranty EXIT DEVICE TRIMS

  • Page 20 and 21:

    FINISH MAINTENANCE AND CARE CAL-ROY

  • Page 22 and 23:

    XIV

  • Page 24 and 25:

    CAL-ROYAL IS GOING GREEN! To: Cal-R

  • Page 26 and 27:

    RMA#__________ MUST BE ON ALL PACKA

  • Page 28 and 29:

    DOOR CLOSERS DOOR CLOSERS

  • Page 30 and 31:

    TABLE OF CONTENTS I. CAL-ROYAL DOOR

  • Page 32 and 33:

    REFERENCE & APPLICATION APPLICATION

  • Page 34 and 35:

    MOUNTING INFORMATION 900 SERIES : R

  • Page 36 and 37:

    INSTALLATION 900 SERIES : OPTIONAL

  • Page 38 and 39:

    CR441 SERIES ANSI 156.4 Grade 1, Fu

  • Page 40 and 41:

    MOUNTING INFORMATION CR441 SERIES :

  • Page 42 and 43:

    CR441 SERIES ACCESSORIES CONCR441 -

  • Page 44 and 45:

    CR441 SERIES ACCESSORIES 3049HOSPRI

  • Page 46 and 47:

    CR801 / CR801S SERIES ANSI 156.4 Gr

  • Page 48 and 49:

    MOUNTING INFORMATION CR801 / 801S S

  • Page 50 and 51:

    CR801 / 801S ACCESSORIES 900HOSPRIN

  • Page 52 and 53:

    MOUNTING INFORMATION 300 SERIES : R

  • Page 54 and 55:

    300 SERIES ACCESSORIES OPTIONAL INS

  • Page 56 and 57:

    MOUNTING INFORMATION 500 SERIES : R

  • Page 58 and 59:

    500 SERIES ACCESSORIES OPTIONAL INS

  • Page 60 and 61:

    MOUNTING INFORMATION 700 SERIES: RE

  • Page 62 and 63:

    700 SERIES ACCESSORIES OPTIONAL INS

  • Page 64 and 65:

    MOUNTING INFORMATION 400 SERIES : R

  • Page 66 and 67:

    400 SERIES : ACCESSORIES OPTIONAL I

  • Page 69 and 70:

    locksets LOCKSETS

  • Page 71 and 72:

    TABLE OF CONTENTS I. GRADE 1 II. GR

  • Page 74 and 75:

    1 ¼” 2 ¾” Heavy gauge zinc

  • Page 76 and 77:

    NM SERIES SECTIONAL TRIMS & FINISHE

  • Page 78 and 79:

    Latch bolt retracted by knob or lev

  • Page 80 and 81:

    HEAVY DUTY ANSI 156.36 GRADE 1 SMAL

  • Page 82:

    NM SERIES Available on NM8080 and

  • Page 85 and 86:

    Meets ANSI / BHMA A158.13 Series 10

  • Page 87 and 88:

    SC SERIES Kits and Accessories Op

  • Page 89 and 90:

    SC SERIES Grade 1 Heavy Duty Hospit

  • Page 91 and 92:

    HEAVY DUTY ANSI 156.5 GRADE 1 SMALL

  • Page 93 and 94:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 95 and 96:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 97 and 98:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 99 and 100:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 101 and 102:

    CALYPSO CLUTCH MECHANISM FIXED THRU

  • Page 103 and 104:

    OMEGA QUALITY DESIGNED AND ENGINEER

  • Page 105 and 106:

    CRB800 SERIES GRADE 1 HEAVY DUTY DE

  • Page 107 and 108:

    CRCODE200 SERIES GRADE 2 MECHANICAL

  • Page 109 and 110:

    PIONEER SL SERIES (NON-CLUTCH MECHA

  • Page 111 and 112:

    COMMANDER CLUTCH MECHANISM INTERCHA

  • Page 113 and 114:

    EXPLORER XP SERIES (NON CLUTCH MECH

  • Page 115 and 116:

    CHALLENGER NON CLUTCH MECHANISM CYL

  • Page 117 and 118:

    TUSCANY CLUTCH MECHANISM OPTIONAL T

  • Page 119 and 120:

    BARRINGTON QUALITY DESIGNED AND ENG

  • Page 121 and 122:

    HIL SERIES INTERCONNECTED LOCKS 4

  • Page 123 and 124:

    JHIL SERIES INTERCONNECTED LOCKS OP

  • Page 125 and 126:

    JHIL SERIES INTERCONNECTED ENTRANCE

  • Page 127 and 128:

    T300 SERIES ANSI A156.5 GRADE 2 HEA

  • Page 129 and 130:

    T400 MAXIMUM SECURITY HEAVY DUTY DE

  • Page 131 and 132:

    CB160 / GL160 SERIES ANSI A156.5 GR

  • Page 133 and 134:

    SL / T220 COMBO ANSI GRADE 2 LEVERS

  • Page 135 and 136:

    COLUMBUS QUALITY DESIGNED AND ENGIN

  • Page 137 and 138:

    EPIC FOR LIGHT COMMERCIAL AND RESID

  • Page 139 and 140:

    T220 STANDARD DUTY DEADBOLTS GL220

  • Page 141 and 142:

    LSD SERIES ANSI A156.2 GRADE 3 STAN

  • Page 143 and 144:

    LEGACY SERIES LEVERSETS WITH PUSH B

  • Page 145 and 146:

    CONTEMPORARY SERIES LEVERSETS & DEA

  • Page 147 and 148:

    CHELSIE SERIES LEVERSETS ADA

  • Page 149 and 150:

    CHELSIE SERIES DEADBOLTS ADA ED-50

  • Page 151 and 152:

    VANGUARD SERIES LEVERSETS & DEADBOL

  • Page 153: ASHLEY SERIES TUBULAR LOCKSETS / LE
  • Page 156 and 157: TABLE OF CONTENTS ITALIA SERIES D
  • Page 158 and 159: LEVER DESIGNS - HANDED - HOLLOW - S
  • Page 160 and 161: TUBULAR LATCH SET APPLICATION For r
  • Page 162 and 163: NM SERIES MORTISE LOCK MODEL ANSI A
  • Page 164 and 165: DEADBOLTS RND-500 (round rose) SQR-
  • Page 166 and 167: EXPLODED DIAGRAM ESCUTCHEON WITH TU
  • Page 168 and 169: CARE AND MAINTENANCE MAINTENANCE Ca
  • Page 170 and 171: CYLINDERS AND KEYING REPLACEMENT CY
  • Page 172 and 173: Large Format 6 Pin Interchangeable
  • Page 174 and 175: CYLINDERS AND KEYING HIGH SECURITY
  • Page 176 and 177: SMALL FORMAT INTERCHANGEABLE CORE (
  • Page 178 and 179: KEY BLANKS AND CONTROL KEYS ITEM CO
  • Page 180 and 181: CYLINDERS AND KEYING COMBI KEY SYST
  • Page 183 and 184: hinges hinges
  • Page 186 and 187: TABLE OF CONTENTS I. BASIC INFORMAT
  • Page 188 and 189: ARCHITECTURAL HINGES BASIC INFORMAT
  • Page 190 and 191: ARCHITECTURAL HINGES BASIC INFORMAT
  • Page 192 and 193: ARCHITECTURAL HINGES ITEM # SIZE
  • Page 194 and 195: ARCHITECTURAL HINGES SPRING HINGES
  • Page 196 and 197: ARCHITECTURAL HINGES RESIDENTIAL W
  • Page 198: ARCHITECTURAL HINGES TYPE CAL-ROYAL
  • Page 201 and 202: FULL MORTISE TEMPLATE HINGES Ball B
  • Page 203: SPRING HINGE Full Mortise . Templat
  • Page 207 and 208: CONTINUOUS HINGES Surface Models
  • Page 209 and 210: CONTINUOUS HINGES Full Surface •
  • Page 211: CONTINUOUS HINGES CODE NO. OF WIRE
  • Page 214 and 215: exit devices exit devices
  • Page 217 and 218: 7700 & F7700 Rim Type Panic And Fir
  • Page 219 and 220: 7760V & F7760V Series GRADE 1 Verti
  • Page 221 and 222: DE7700 Series GRADE 1 Delayed Egres
  • Page 223 and 224: Alarm Exit Hardware Rim Type Exit D
  • Page 225 and 226: Trim Selection RIGID LEVER ESCUTCHE
  • Page 227 and 228: Trim Selection PULL DESIGN 7700 NL
  • Page 229 and 230: (ELR) Electric Latch Retraction
  • Page 231 and 232: POWER SUPPLIES FOR ELECTRIFIED EXIT
  • Page 233 and 234: WCVR7700 & FWCVR7700 Series Optiona
  • Page 235 and 236: MR7700 & FMR7700 Series GRADE 1 Mor
  • Page 237 and 238: GLS7700 Series GRADE 1 Rim Type Nar
  • Page 239 and 240: Trim Selection ESCUTCHEON LEVER DES
  • Page 241 and 242: Strike & Accessories Strikes for us
  • Page 243 and 244: 7700 Series ANSI A156.3 Grade 1 Se
  • Page 245 and 246: ANSI A156.3, Grade 1 Features & Con
  • Page 247 and 248: 9860V & F9860V Series A9860V & AF98
  • Page 249 and 250: Alarm Exit Hardware GRADE 1 Rim Typ
  • Page 251 and 252: Trim Selection HEAVY DUTY STAINLESS
  • Page 253 and 254: Trim Selection PULL DESIGN 9800 NL
  • Page 255 and 256:

    (ELR) Electric Latch Retraction

  • Page 257 and 258:

    driven electric latch retracting ex

  • Page 259 and 260:

    WCVR9800 & FWCVR9800 Series Optiona

  • Page 261 and 262:

    MR9800 & FMR9800 Series AMR9800 & A

  • Page 263 and 264:

    GLS9800 Series GRADE 1, Rim Type Na

  • Page 265 and 266:

    Trim Selection ESCUTCHEON LEVER DES

  • Page 267 and 268:

    Strike & Accessories 221 Standa

  • Page 269 and 270:

    Fire Exit Hardware Selector SINGLE

  • Page 271 and 272:

    ARROW S1200 S1100 S3800 / 1800 S370

  • Page 273 and 274:

    2200 & F2200 Series A2200 & AF2200

  • Page 275 and 276:

    LBR2260V & LBRF2260V Series ALBR226

  • Page 277 and 278:

    Trim Selection CLUTCH CYLINDRICAL L

  • Page 279 and 280:

    Trim Selection PULL DESIGN 2200PULN

  • Page 281 and 282:

    (ELR) Electric Latch Retraction

  • Page 283 and 284:

    Strike & Accessories 221 Standar

  • Page 285 and 286:

    Fire Exit Hardware Selector SINGLE

  • Page 287 and 288:

    Comparison Chart RIM EXIT DEVICE CO

  • Page 289 and 290:

    5000 & F5000 Series GRADE 2 Rim Typ

  • Page 291 and 292:

    T5000 & TF5000 Series MADE IN TAIWA

  • Page 293 and 294:

    Trim Selection LEVER DESIGN Non han

  • Page 295 and 296:

    Strikes & Accessories 221 Stand

  • Page 297 and 298:

    T5000 & TF5000 Rim Type T5000V & TF

  • Page 299 and 300:

    Trim Selection ESCUTCHEON LEVER DES

  • Page 301 and 302:

    thresholds thresholds

  • Page 303:

    TABLE OF CONTENTS I. CARPET THRESHO

  • Page 306 and 307:

    THRESHOLD COMPARATIVE CHART SIZE CA

  • Page 308 and 309:

    lites & louvers lites & louvers

  • Page 311 and 312:

    45-180 Minute Fire-Rated Steel Visi

  • Page 313 and 314:

    90 Minute Fire-Rated Steel Louvers*

  • Page 315 and 316:

    uilders hardware builders hardware

  • Page 318 and 319:

    TABLE OF CONTENTS I. NUMBERS AND LE

  • Page 320 and 321:

    NUMBERS AND LETTERS ILLUSTRATION IT

  • Page 322 and 323:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 324 and 325:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 326 and 327:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 328 and 329:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 330 and 331:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 332 and 333:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 334 and 335:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 336 and 337:

    UNIVERSAL AUTOMATIC FLUSH BOLT UNI

  • Page 338 and 339:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 340 and 341:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 342 and 343:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 344 and 345:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 346 and 347:

    OVLCLR-408 / OVLCLR-5012 NEW ITEM

  • Page 348 and 349:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 350 and 351:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 352 and 353:

    Includes Tactile Characters & Grade

  • Page 354 and 355:

    Includes Tactile Characters & Contr

  • Page 356 and 357:

    With optional Soft Close System

  • Page 358 and 359:

    electronic & electrified electronic

  • Page 360 and 361:

    TABLE OF CONTENTS I. ELECTRONIC LOC

  • Page 362 and 363:

    CR3000 FINISHES, FUNCTIONS and FEAT

  • Page 364 and 365:

    CR6000 FINISHES, FUNCTIONS and FEAT

  • Page 366 and 367:

    PL7100 FINISHES AVAILABLE BHMA SYM

  • Page 368 and 369:

    RS2100 FINISHES, FUNCTIONS and FEAT

  • Page 370 and 371:

    CR9000 FINISHES, FUNCTIONS and FEAT

  • Page 372 and 373:

    DB5000 FINISHES, FUNCTIONS and FEAT

  • Page 374 and 375:

    DB9000 FINISHES, FUNCTIONS and FEAT

  • Page 376 and 377:

    ZWDB-10 FINISHES, FUNCTIONS and FEA

  • Page 378 and 379:

    LOCKSETS GENESYS SERIES ELECTRIFIED

  • Page 380 and 381:

    EXIT DEVICES DE7700 SERIES DELAYED

  • Page 382 and 383:

    EXIT DEVICES HEAVY DUTY KEYLESS LOC

  • Page 384 and 385:

    EXIT DEVICES 7700, 9800, 2200 SERIE

  • Page 386 and 387:

    FEATURES • reliable • • p

  • Page 388 and 389:

    ELECTRIFIED HARDWARE MDHR / MDHS MA

Best 40H Series Catalog - Top Notch Distributors, Inc.
FE5400S Catalog - Corbin Russwin
Print Catalog Page - Cal-Royal
Best 40H Series Catalog - Top Notch Distributors, Inc.
Components - Ironmonger
Components PDF, 0.7 mb - FSB
“NM” SERIES - Cal-Royal
1xTEnS5
L-Series Catalog - Security Technologies
Residential - Top Notch Distributors, Inc.
HEAVY DUTY MORTISE LOCKS - Best Access Systems
Untitled
33A/35A Catalog - Security Technologies
Specialty Locks & Trims
Yale 8000 series Mortise Lock Catalog - Door Hardware
SOLid brASS - Top Notch Distributors, Inc.
The Guard-X Exit Alarm Lock Catalog - Von Duprin
FALCON JULY 2013 REV 7-20-13 PRICE BOOK.pdf - Access ...
Falcon April 2010 Pricebook.pdf - Access Hardware Supply
PRODUCT CATALOG - Olympus Lock
B-Series Catalog - Security Technologies
9K Series Heavy Duty Locks And Levers - DH Pace
Deadbolts Privacy bolts - Hot2Cold
Ultra Latchbolt - Godrej Locking
Classic Concierge Flyer - Reflections® by Yale
Classic Concierge Flyer - Access Hardware Supply