Agrodieren.be equestrian sport horse equipment equestrian equipment stable equipment catalog 2018

Heatable Water Bowl with Tube Valve H10, 24 V ​
• available with heating power of approx. 80 W or approx. 50 W • water bowl made of grey cast iron, black enamelled
• grey cast bottom tray with black powder-coated finish • water flow rate can be regulated on the pipe valve
• new heating concept with valve heating to keep clear of frost • easy to install bowl, no need to remove the valve for
installation • power supply via transformer at least 100 W (not supplied) • connections at top and bottom G1/2“ internal
thread • weight 11,5 kg • bowl capacity 1,6 litres • for wall and tube mounting • suitable for circulating heat systems
• simple power supply by means of the external terminal box
Antifreeze Water Bowl
enamelled
ref. no.
description
​ ​ €
222010 Water Bowl H10, 80 W 1 48 ​
222005 Water Bowl H10, 50 W 1 48 ​
222019 Mounting brackets, in pairs 1 - ​
221971 Protection bar size 2 1/4 48 ​
221975 Browsing Protection for Pipelines 1 400 ​
Heated 24 V drinking bowls - how do they work?
Heating drinking water using the trough is so easy! You only need at least one heatable trough,
a thermostat and a transformer (as 24-volt operation).
Which transformer for how many bowls? Simple! If you only want to operate a drinking bowl
with 80 Watt of power, then a 100 VA transformer will suffice. If you also want to connect a
24 V heating cable, simply add the power consumption (= Wattage) of the cable and this gives
you the minimum power required for the transformer. Do not measure the transformer‘s power
too precisely in order to have a buffer for extensions.
Wiring diagram
1
2
3
4
5
6
7
8
9
Mains connection 230 V, separately fused
Water connection, spur line or
circulation system possible
Frost protection thermostat 230 V (222794)
Junction box, protection class at least IP54
Transformer 230 V AC => 24 V AC
100 Watt (222796), 200 Watt (222797),
300 Watt (222626), 400 Watt (222798)
Junction box, protection
class at least IP54
24 V feed cable for further heatable
drinking bowls or heating cables
24 V feed cable for connecting to the
drinking bowl
24 V frost-protection heating line
(22358, 223581)
(if not connected to a circulating heat system)
10
11
12
Protective plate for the bite area (221975)
Insulation of the Piping
Heatable Trough
(e.g. 222010)
When choosing transformers, ensure that you
take account of the power loss through the
feed cable. A sample calculation and a table
containing the power losses can be found in
this catalogue.
230 V
24 V
Bite area 24 V
233