Paddlewheel Flow Meter

SUCCESS STORY
KIK CUSTOM PRODUCTS
SODIUM HYPOCHLORITE
APPLICATION
TK Series Paddle Wheel Flow Meter Solves Tough Hypo Service
When KIK Custom Products a private label bleach manufacturer required a flow
meter to measure 12% Sodium Hypochlorite they contacted Icon Process Controls.
KIK was looking for a device capable of measuring the flow of ‘bleach or hypo' as it is
commonly known, a very strong oxidizing chemical. They meter had to have a local
display showing flow rate + flow total and a 4-20mA output signal to a remote display.
KIK stated they were skeptical of the paddle wheel technology, previous experience
with this type of design was less than stellar; plastic paddles and metal rotor pins
did not last.
The TK Series plastic paddle assembly is different in design, incorporating a Tefzel
paddle, complete with a zirconium ceramic rotor pin with 2 bushings located inside
the paddle. The material Zirconium Ceramic offers superior chemical and wear
resistance and come with a life-time warranty.
KIK was open to issuing a performance PO when the were informed all Truflo paddle
wheel assembly's are backed by a life-time warranty.
KIK has decided to standardized on the Truflo TK series for all chemical applications
Truflo...Designed to Outperform on Tough Corrosive Applications
To discuss your application please contact us directly
at sales@iconprocon.com
Visit Our Website for more detailed information on the Truflo Paddle
Wheel Flow Meters