Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Password Enter<br />
(4-2) Set Telephone Set Telephone Number (4-2-1)<br />
Set Dial Mode Tone<br />
Pulse 33/66<br />
Pulse 40/60<br />
Set Auto Answer Auto Answer On Set Ring Count<br />
Auto Answer Off<br />
Set Telephone Line Cut Detection Permanent Off<br />
Away Mode On<br />
Permanent On<br />
Set Cease Dialing Mode 30 Minutes Due<br />
CMS Report OK<br />
Set Tel. Ringer Tel. Ringer On<br />
Tel. Ringer Off<br />
Set Dial Tone Check Dial Tone Check Enable<br />
Set Tel/GSM Link<br />
Dial Tone Check Disable<br />
Page 26 of 42<br />
Dial Mode: Tone/ Pulse 33/66 / Pulse 40/60 (default, Tone)<br />
Check your telephone system and select the proper Pulse or Tone mode for the auto-dialer.<br />
Auto Answer Ring Count: Auto Answer ON Ring Count 1-30/ Auto Answer OFF (default, Auto Answer OFF)<br />
Auto-Answer ON: The Base Unit will answer the incoming call automatically after the ring count number set in this command has been reached. (You have<br />
http://www.nettrading.ro/SCIENTECH/LS-30/MANUAL/LS-30%20manual050228.h...<br />
2009-12-18