Dish Washer - DIS15011
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating the product<br />
C<br />
The<br />
C<br />
If<br />
time delay will start<br />
countdown with the closing<br />
of the door after selecting the<br />
Time Delay function.<br />
the door is opened while the<br />
Time Delay function is active,<br />
the countdown will be paused<br />
and start icon will start to flash.<br />
Changing the settings while Time<br />
Delay function is active<br />
While the Time Delay function is activated,<br />
you cannot make changes in the washing<br />
programme, auxiliary functions or the<br />
duration of time delay.<br />
C<br />
Programme and auxiliary<br />
functions cannot be set/<br />
changed after the programme<br />
has started.<br />
To cancel the Time Delay function<br />
To cancel the process while the Time Delay<br />
function is active the programme should be<br />
canceled.<br />
C<br />
Time Delay function cannot be<br />
set after the programme starts.<br />
Starting the programme<br />
Close the door of your machine to start it<br />
after selecting the programme and auxiliary<br />
functions.<br />
C<br />
Your machine performs water<br />
softening depending on the<br />
hardness level of the supply<br />
water. Washing time can<br />
change while the programme<br />
is running depending on the<br />
ambient temperature where<br />
your machine is installed,<br />
temperature of the supply<br />
water and amount of the<br />
dishes.<br />
<strong>Dish</strong>washer / User’s Manual<br />
C<br />
Pay<br />
C<br />
The<br />
attention not to open the<br />
door of the machine when it is<br />
running. There may be a rush of<br />
vapour when you open the door<br />
of your machine; be careful.<br />
machine will remain silent<br />
in pause mode for some time<br />
in order to remove the water in<br />
the machine and on the dishes<br />
completely and to have the<br />
water softener cleaned, and<br />
then it will resume running in<br />
drying mode.<br />
Cancelling the programme<br />
Press and hold the Programme Selection<br />
/ Programme Cancel keys for 3 seconds.<br />
Release the key as the Start indicator starts<br />
flashing.<br />
Once you close the door of your machine,<br />
draining is completed in 2 minutes<br />
and the machine gives an audible warning<br />
when it is completed.<br />
C<br />
There might be residues of<br />
detergent or rinse aid in the<br />
machine and/or on the pieces<br />
being washed depending on the<br />
step the programme you have<br />
cancelled was in.<br />
Salt indicator ( )<br />
Please check the salt indicator on the<br />
display to see whether there is adequate<br />
amount of softening salt in the dishwasher<br />
or not. You need to refill the salt reservoir<br />
with salt whenever salt indicator appears<br />
on the display of your machine.<br />
C<br />
Adjusting the water hardness<br />
level is explained in Water<br />
Softening System section.<br />
27 /41 EN
Change language