3.1. - Hettich

Article Distance Angle Order no. PU
Hole line
mm
Angle plate
for cross mounting plate
• Silver-grey plastic
Assembly note angle plates 5°/10°:
1. Sockets
or
2,5
2,5 9,5
Insert in ø 5 mm hole line drilling
2. Mounting and angle plates
Fasten with chipboard screws ø 4 mm
or ø 4,5 mm.
Distance spacer plate
for cross mounting plate
• Silver-grey plastic
13
5°
10°
Socket no. 41
Order no. PU
0 048 575 1/200
Socket no. 42
Order no. PU
0 048 574 1/200
3,0 mm
5,0 mm
10,0 mm
5° 10°
System 2006 angle mounting plates and
parallel distance plates for Slide-on hinges
3
5
10
15°
37 5° 0 079 349 1/50
10° 0 079 350 1/50
• A trial mounting is always
recommended for
configurations of this type!
• Cabinet angle can be
increased or reduced simply
by turning the plastic angle
plates
• Angle plates and parallel
spacer plates can be stacked
• Can only be used with
screw-on cross mounting
plate order no.
1 079 197 - 1 079 200
(see page 3.1.150)
Article Distance Distance Order no. PU
Hole line mm
mm
37 3,0 0 079 323 1/50
5,0 0 079 324 1/50
10,0 0 079 325 1/50
• Can only be used with
screw-on cross mounting
plate order no.
1 079 197 - 1 079 200
(see page 3.1.150)
Concealed hinges Slide-on 3.1.151