2019-The-Process

STEP 1
STEP 2
In any remodeling project, there is typically a glue or
some type of sealer on the surface that needs to be
removed to expose the underlying concrete floor. This
project had layers of glue from the previous carpet. A
wet removal process combines water to help in this
removal along with a 1,000 lb concrete grinder with
diamond tooling or scrappers.
STEP 3
Once the floor is cut open and cleaned we then work
on filling in the joints in the concrete, as well as
patching.
STEP 4
The grinding process now turns to honing and polishing
to continue to refine the floors. A remodel project
like this may take 6-9 passes with various segments
of tooling to get the desired finish.
All edges, corners, and detail work are done in a similar
manner with handheld tooling.
29