BGS 2019-2020 no2

201/20
Ignition-Timing Tester for Classic / Vintage Cars
• for checking the ignition spark
Item #
3030
Hydraulic Drive Shaft Puller Set | 125 - 215 mm
Electrics / Gearbox / Axle / Steering
• for pushing oout the prop shafts or removing the wheel hub
• strong puller for cars, vans and vehicles with a bolt circle diameter of
125 - 215 mm
• especially suitable for glued or rusty drive shafts
• pressure force of the hydraulic cylinder is 10 t, can be used with impact
spindle instead (included)
• quick and easy adjustment of the pulling lefs and diameter
• suitable for wheel hubs with 3, 4, 5, and 6 holes
• hydraulic spindle 10 t, 1 1/2" thread and pressure tip, sliding handle with
22 mm hex drive, length 250 mm
• impact spindle with movable bolt 30 mm hex drive, length 285 mm
• impact wrench with 30 mm hex drive for strinking spindle, length 200
mm
• 35 mm spindle extension (for hydraulic ram)
• centering tip for hydraulic spindle
• 101 mm adaptor disc for puller arms and hydraulic spindle
• 5 puller arms
• length: 175 mm
Item #
7681
Wheel Hub Puller with Sliding Hammer | 6 pcs.
• forged type
• for pulling cut the wheel hub
• thread size of inner thread on sliding hammer is 9/16" x 12G
• thread size of inner thread of pulling foot is 5/8" x 18G
• total length with assembled pulling foot is approx. 510 mm
• the different threads can be used with the included adaptor
• weight of sliding hammer: 1600 g
Item #
7745
500