BGS 2019-2020 no2

201/20
Clutch Aligning Tool Set
• universal application for vehicles with a hub diameter of Ø 15.0 - 26.0
mm
• for mounting single and double disc dry clutches
• for centering of clutch discs on cars with and without pilot bearings
• suitable for cars, SUV and small trucks with front, rear and 4-wheel drive
• spindle guide: 55 mm long, M15 x 1.5, mandrel range: 15 mm to 19 mm
• spindle guide: 100 mm long, M15 x 1.5, mandrel range: 19.5 mm to 26
mm
• spindle guide: 150 mm long, M15 x 1.5 thread for small and large cones
• small cone adaptor, spindle inner thread: M15 x 1.5, range: 19 - 30 mm,
inner diameter: 20 mm, suitable for 55 mm spindle guide
• large cone adaptor, spindle inner thread: M15 x 1.5, range: 26 - 35 mm,
inner diameter: 27 mm, suitable for 100 mm spindle guide
• dual disc adaptor height: 30 mm, cone side: 29 - 49 mm, plate side: 49 -
69 mm, for clutches without pilot bearing
• pilot adaptor Ø 10 - 12 - 14 - 15 - 16 - 17 - 19 - 25 - 27 mm, for clutches
with pilot bearing
Gearbox / Axle / Steering
Item #
8760
Clutch Aligning Tool Set
• for clutch discs with 15 to 28 mm clutch hub diameter
• allows an accurate centering of the clutch disc on vehicles with or
without pilot bearing
• alignment according to friction surface of the clutch pressure plate
• suitable for most vehicles
• centering sleeve Ø: 12, 14, 15, 16, 17, 18 & 19 mm
Item #
1708
Clutch Aligning Set | 2 pcs.
• universal use for vehicles with a hub diameter of Ø 15.0 mm - 26.6 mm
• for mounting single-disc dry clutches
• centering the clutch disc over the guide bearing is not necessary
• in 2 sizes: 15 - 19 mm and 20 - 26.6 mm
Item #
1709
522