BGS 2019-2020 no2

201/20
Ball Joint Puller | for Mercedes-Benz
• for removal and installation of lower ball joints on the wishbone
• suitable for Mercedes Benz models W124, W129, W201
• consisting of pressure frame, disassembly and assembly pressure piece
and reducer ring
• allows a much easier renewing of ball joints
• spindle with hexagon drive
Item #
8781
Gearbox / Axle / Steering
Ball Joint Spreader Tool Set | 7 pcs.
• for spreading the seats of shock absorbers and steering parts
• with 2 exchangeable spreading inserts (5 mm and 8 mm depth) and
guide pins 8x10 mm (2x) and 10x12 mm (2x) for the shock absorber seat
in the wheel bearing housing when changing the damper, for wishbone
ball joint seat when disassembling the suspension strut etc.
• slipping off is avoided by strong guiding bolts that are stuck in the screw
holes
• a spindle with 13 mm external hexagon pushes the spreader in the
opening, no need to use a hammer
• material fatigue and breakage esp. of aluminium parts is avoided
Item #
65592
Ball Joint Separator
• forged carbon steel
BGS 1796
• pulling width: 46 mm
• pulling height: 47 mm
• overall width: 70 mm
• spindle M16 x 1.5 / hexagon 17 mm
• width: 70 mm
BGS 1797
• pulling width: 62 mm
• pulling height: 64 mm
• overall width: 85 mm
• spindle M18 x 1.5 / hexagon 19 mm
• width: 85 mm
Item # Description
1796 Ball Joint Separator | 23 mm
1797 Ball Joint Separator | 29 mm
516