BGS 2019-2020 no2

201/20
Axle Boot Clamp Set | 12 pcs.
• for securing of rubber axle boots on drive shafts
• zinc coated
• can be mounted e. g. with Pliers for Axle Boot Clamps (BGS 161)
• length: 430 mm
• BGS 9451, width: 7 mm
• BGS 9452, width: 9 mm
Item # Description
9451 Axle Boot Clamp Set | 7 mm | 12 pcs.
9452 Axle Boot Clamp Set | 9 mm | 12 pcs.
Universal Axle Boot Set | 4 pcs.
Gearbox / Axle / Steering
• suitable as a replacement for many axle boots
• allows a cost- and time-saving repair
• 3 steps, joint side diameter approx. 80, 90 and 100 mm (unstretched)
• with inside holding nose on all three steps
• diameter of shaft side approx. 30 mm
• length: approx. 128 mm
• extremely elastic and durable material
• especially suitable for use with BGS 162 boot slider
• includes lubricating grease for all types of drive shaft joints
• multistep boot clips
Item #
164
Wishbone Lever Tool
• to depress the wishbone and other axle parts when removing the drive
shaft, whem chamging the drive shaft boot or the wheel bearing
• facilitates the removal of control arm ball joints from the wheel bearing
housing
• also very helpful in the assembly of pre-tensioned control arms
• support adjustable in 3 positions
• neoprene handle for secure grip
• length: approx. 120 cm
Item #
3521
506