hemsec 8 pager FINAL artwork for print
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Manufacturing
capabilities
Metal faced
Hemsec’s range of metal-faced panels are auto-adhesively
bonded during the manufacturing process to the wet lay
down polyisocyanurate closed cell insulation core.
Panels are available with an array of different colour and
steel finishes from various suppliers to meet all project
requirements and are completed with our Smooth, Microrib
or 100 Rib detail facing options.
The cover width is 1155mm, with panel thicknesses ranging
from 50mm to 200mm. Made-to-order in bespoke lengths
from a minimum of 2m (2.4m on 50mm panels) up to our
maximum line capability of 15m.
Timber faced
Hemsec SIPs are constructed from two faces of Oriented
Strand Board (OSB/3) sandwiching a pressure injected,
rigid polyurethane (PUR) insulation core.
We can supply panels with either 15mm or 11mm thick
OSB facings.
The cover width is 1200mm, with panel thicknesses ranging
from 100mm to 225mm. Made-to-order in bespoke lengths
from a minimum of 1.2m up to 6m. Standard lengths of 2.4,
3.0, 3.5, 4.0, 5.0 and 6.0m are also available.
Panel joint
Tongue and Groove
Panel joint
Mini SIP spline
Panel profile
Alternative timber
spline (by others)
Micro rib
100 rib
Rebates
Smooth
Panels are supplied
filled to edge as
standard. 40 or 50mm
rebates are available
and can be applied to
all edges. Panel
thickness dependant.
Rebates and Thermal breaks
Maximum 200mm rebate
positioned at the top of the
panel to suit ceiling
panel thicknesses.
Landing depth of 40mm
for 80mm thick panels or
50mm for 100-200mm
thick wall panels.
20mm saw cut depth,
thermal break.
Positioned between 80-300
mm from base of panel.
Construction partners
As a high-volume producer of SIPs, Hemsec is particularly
attractive to those requiring the security of a reliable source
through a leading manufacturing supply-partner.
Your SIPs project will run smoothly with support from our
trusted partners from across the construction industry. We
can facilitate pre-manufacturing input from architects and
designers, and services post SIPs manufacture, including
fabricators/engineers and installers.