AS Drive Units for Augers - Kinshofer

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
AS Drive Units for Augers
For use on excavators, AS03 / AS05 / AS08 / AS10 auger drives are an
economical, robust solution for drilling holes for fence posts, poles,
foundations and landscaping. Application specific wear parts and
augers mean our auger packages are tailor-made to suit your needs.
l Profitable – With better speed and precision than alternative drilling
methods, the AS 03 / AS 05 / AS 08 / AS10 drive units and augers save
you time, labour and filling materials.
l Adaptable – A range of drive units with different auger diameters and
digging teeth means a AS 03 / AS 05 / AS 08 / AS10 is available for all
types of excavators, and suitable for a wide variety of applications.
l Durable – Designed and built to last, AS 03 / AS 05 / AS 08 / AS10 series
drive units can handle hundreds of consecutive cycles.
l Drive Units – steel housing can withstand high shock loading, robust
construction, components run in a maintenance free, constant oil bath,
gears can easily be shifted from forward to reverse to quickly free the
unit from being jammed.
l Available for different excavator operating weights: 1t - 3t: AS03,
3t - 5t: AS05 , 5t - 8t: AS08, 5t - 10t: AS10.
l Augers:
l teeth are set on a continuous spiral to provide maximum penetration and uniform performance.
l Wear parts:
l rubber locking system makes teeth easy to exchange.
l using a hammer and punch, tooth exchange is done on-site.
l two teeth options:
Allround Teeth – BS-A: made of tempered material, bolt-on teeth are suitable for earth and clay.
Strong Tungsten Teeth – BS-S: tungsten tipped, suitable for medium-rich soil, stony or frozen ground, heavy clay or asphalt.
Drive Units AS03 / AS05 / AS08 / AS10
Drive Unit AS03: Torque (at 20 MPa): 1945 Nm
Torque (at 24 MPa): 2331 Nm
Pump capacity: 25 - 60 l/min
Output shaft: 57 mm square
Self-weight: 45 kg
Operating weight excavator: 1 - 3 t
Upper connection (width x pin-Ø) 84 x 30 mm
Drive Unit AS05: Torque (at 20 MPa): 3733 Nm
Torque (at 24 MPa): 4473 Nm
Pump capacity: 40 - 75 l/min
Output shaft: 57 mm square
Self-weight: 65 kg
Operating weight excavator: 3 - 5 t
Upper connection (width x pin-Ø) 84 x 30 mm
Drive Unit AS08: Torque (at 20 MPa): 4312 Nm
Torque (at 24 MPa): 5166 Nm
Pump capacity: 60 - 90 l/min
Output shaft: 57 mm square
Self-weight: 80 kg
Operating weight excavator: 5 - 8 t
Upper connection (width x pin-Ø) 84 x 30 mm
Drive Unit AS10: Torque (at 24 MPa): 7056 Nm
Pump capacity: 80 - 115 l/min
Output shaft: 57 mm square
Self-weight: 95 kg
Operating weight excavator: 5 - 10 t
Upper connection (width x pin-Ø) 84 x 30 mm
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
Augers BS-100 – BS-800 for Standard / Heavy Duty
Augers for Drive Units AS03, AS05, AS08 and AS10
Type
Application
Diameter of auger
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
Length of auger
(without extension)
Wearparts
Type / Qty. of teeth
(mm) (mm) (kg)
BS-150-57A standard duty 150 1200 A / 2 28
BS-200-57A standard duty 200 1200 A / 2 31
BS-225-57A standard duty 225 1200 A / 2 36
BS-250-57A standard duty 250 1200 A / 2 39
BS-300-57A standard duty 300 1200 A / 4 46
BS-350-57A standard duty 350 1200 A / 4 50
BS-400-57A standard duty 400 1200 A / 6 52
BS-450-57A standard duty 450 1200 A / 6 54
BS-500-57A standard duty 500 1200 A / 8 72
BS-600-57A standard duty 600 1200 A / 8 81
BS-800-57A standard duty 800 1200 A / 9 123
BS-100-57S heavy duty 100 1200 S / 0 23
BS-150-57S heavy duty 150 1200 S / 2 28
BS-200-57S heavy duty 200 1200 S / 2 31
BS-225-57S heavy duty 225 1200 S / 2 36
BS-250-57S heavy duty 250 1200 S / 2 39
BS-300-57S heavy duty 300 1200 S / 4 46
BS-350-57S heavy duty 350 1200 S / 4 50
BS-400-57S heavy duty 400 1200 S / 6 52
BS-450-57S heavy duty 450 1200 S / 6 54
BS-500-57S heavy duty 500 1200 S / 8 72
BS-600-57S heavy duty 600 1200 S / 8 81
BS-800-57S heavy duty 800 1200 S / 9 123
Package consists of: auger , wearparts
Accessories
Type Description
KM 501 1t-8t upper suspension w/o pendulum damper between rotator and excavator
KM 511 1t-8t upper suspension with pendulum damper between rotator and excavator
BV-1000-57 extension for augers – length 1000 mm (25 kg)
BV-1500-57 extension for augers – length 1500 mm (34 kg)
SW01 cardanic adapter SW01 for Lehnhoff grab exchange system MS01 without suspension – up to 2t
SW03 cardanic adapter SW08 for Lehnhoff grab exchange system MS03 without suspension – up to 5t
SW08 cardanic adapter SW08 for Lehnhoff grab exchange system MS/HS08 without suspension – up to 12t
Technical Drawings
Self-weight
1 Drive unit
2 Auger
3 Wear parts (teeth & pilots)
4 Extension
Standard
auger BS-A
BS-250-57A
Heavy duty
auger BS-S
BS-350-57S
Available
spare parts
BS-A exterior tooth
BS-A interior tooth
BS-A pilot
BS-S exterior tooth
BS-S interior tooth
BS-S pilot