Pricelist 2021/2022
EMPUR Pricelist 2021/2022
EMPUR Pricelist 2021/2022
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Control technology<br />
10.8 Accessories for radio, radio Exclusiv and BUS<br />
Item Item description PU Price €/unit Item No. PG<br />
Humidity monitoring with internal sensor*<br />
serves the purpose within a surface heating/cooling system of monitoring<br />
the dew point. It detects any condensation on the connection pipe<br />
and switches off the cooling mode of the system to protect the building,<br />
until no condensation can be discerned. Power supply (24V AC/DC) via<br />
base station BUS (Observe the wiring)<br />
1 unit<br />
272.77<br />
585020<br />
01<br />
Humidity monitoring with external sensor, 1 m cable length*<br />
1 unit<br />
395.34<br />
585021<br />
01<br />
Repeater with power adapter, 1.5 m cable length*<br />
is used to extend the radio range between the base station<br />
and room control units<br />
Range $ 25 m in buildings<br />
Power supply 5 V via power adapter<br />
1 unit<br />
207.93<br />
585022<br />
01<br />
Active external antenna, with connecting cable 5 m*<br />
is used to extend the radio range of the base station<br />
Range $ 25 m in buildings<br />
Power supply by base station<br />
1 unit<br />
202.06<br />
585023<br />
01<br />
Attention: Only use the supplied 5 m antenna connection cable!<br />
Dew point monitor 230 V, 50-60 Hz, IP20/0<br />
Power 1 VA, for external sensor 12 V<br />
1 unit<br />
252.60<br />
560301<br />
01<br />
Only functional in combination with dew point sensor type 2 or type 3!<br />
Please observe the installation instructions!<br />
Dew point sensor type 2 for dew point monitor 230 V<br />
(560301) incl. 10 m cabel, with supply air duct for humidity detection<br />
1 unit<br />
91.09<br />
560302<br />
01<br />
NEW<br />
Dew point sensor type 2 for dew point monitor 230 V<br />
(560301) incl. 10 m cabel, for pipe mounting<br />
1 unit<br />
83.56<br />
560303<br />
01<br />
Top-hat rail for mounting the base station in the manifold cabinet<br />
Length: approx. 400 mm, packed in carton with 2 screws<br />
Only order supplies for “Economy” manifold cabinets!<br />
1 set<br />
5.41<br />
902600<br />
01<br />
ATTENTION: Please take into account the additional space required in<br />
the manifold cabinet (width)!<br />
NOTE<br />
* 5 years system warranty with exclusive use of EMPUR ® components:<br />
Manifolds, actuators, room operating units and control terminal strips<br />
Recommended retail price<br />
89