Orbi internet setup using ISP login-Spectrum, AT

Orbi
internet setup using ISP
login-Spectrum, AT&T, Frontier

You always have option to set up the router automatically.
Yet if, you want to set router up manually ,you can use web
browser without any problem. Get the ISP information ready
with you before you start the set up process. However, if
your internet connection is already working, you don’t have
to launch the ISP login program. You automatically get
logged in when you start an internet application.

Knowledge of ISP information is important in case
you set up internet first time. By ISP informatic, we
mean the information provided to you by your
service provider to connect with the World Wide
Web. It should include-
• Information of ISP configuration for DSL account.
• ISP login name and password.
• Static address settings (in case of special deployment by ISP,
this setting is infrequent). Contact your ISP if you can’t find
this information.

Follow The Directions carefully
• Open the browser from the device connected to the orbi network.
• Enter orbilogin.com in the browser.
• Enter the user name (“admin”) and password (same as you used to
log in for the first time) in the log in window. Remember that user
name and password are case sensitive.
• The BASIC home page displays on the screen.
• Select “internet” to open the internet setup page.
• On the internet setup page, you will see two radio buttons (Yes/No)
that ask you “Dose your internet connection require a login”. Select
“Yes”.
• Select “internet service provider” from the menu. Choose the
encapsulation method from- “PPPoE”, “PPTP”, or “L2TP”.

• Enter your login name in the given field. Usually, the login name is an
email address.
• Type the password in the given field that you use to log in to your
internet service.
• Type in the “Service Name” in the given field if your ISP requires it.
• Go to the “Connection Mode” menu and select “Always On”, “ Dial on
Demand”, or “Manually connect”.
• You can change the Internet login time-out period through the “Idle
timeout (In minutes)” field. Specify the time (minutes) in the given
field.

In this field , specify how long the router
should keep the internet connection active
when no one using the internet. If you specify
zero (0) minutes, the connection will stay
active always. Users will not be longed out
ever.
For more visit: www.orbi-log.com.