How do I set up my Orbi router and satellite

How do I set up my Orbi router and
satellite?
To set up your Orbi router and satellite:
1. Unplug your modem and remove and replace the backup battery if it uses one.
2. Plug the modem back in.
3. Connect your modem to the yellow Internet port on your Orbi router using the
included Ethernet cable.
4. Connect your Orbi router to a power source.
Note: If the Power LED on the back of the Orbi router does not light, press the
Power On/Off button.
5. Wait for the Orbi router's ring LED to light solid white and then pulse white.
6. Place the Orbi satellite in the middle of your house to get the best WiFi coverage.

7. Connect the Orbi satellite to a power source.
Note: If the Power LED on the back of the Orbi satellite does not light, press
the Power On/Off button.
8. Wait for the Orbi satellite's ring LED to light solid white, then pulse white, and then
pulse magenta.
Note: The Orbi satellite's ring LED might pulse magenta for up to one minute
while the satellite attempts to sync with the Orbi router.
9. After the Orbi satellite's ring LED pulses magenta, it lights one of the following
colors for 10 seconds then turns off:
o
o
o
Solid blue. The connection between the Orbi router and Orbi satellite is good.
Solid magenta. The Orbi satellite cannot connect to the Orbi router. Move the
Orbi satellite closer to the Orbi router.
Solid amber. The connection between the Orbi router and Orbi satellite is fair.
Consider moving the Orbi satellite closer to the Orbi router.
Note: If the Orbi satellite's ring LED is still pulsing magenta after about one
minute, and you already moved the Orbi satellite closer to the Orbi router,
press the Sync button on the Orbi router and on the Orbi satellite.
If the Orbi satellite successfully syncs with the Orbi router, the Orbi satellite's
ring LED pulses white, then lights solid blue to indicate a good connection, and
then turns off.
10. Connect your computer or mobile device to the Orbi router or satellite with an
Ethernet or WiFi connection.
Note: To connect with WiFi, find the preset WiFi network name (SSID) and
password on the label on the Orbi router or satellite and connect to that network
from your WiFi-enabled computer or mobile device.
11. Download the Orbi app or visit http://orbilogin.com to set up your Orbi WiFi
network.
The Orbi router's ring LED turns off after the setup is complete.

For more visit: www.orbi-log.com