Farms & Farm Machinery #389

HARVESTERS 

12 PAGE SPECIAL FEATURE 

Issue 389 > $7.95 > On sale 10/09/20 

Tractors, farm machinery & materials handling equipment for sale 

>> INSIDE 

Impressive 

Deutz-Fahr 6140 

No Till Thriller 

Weaving GD Drill 

HIGHER 

power 

Dependable, connected and with over 200hp – 

Massey Ferguson’s new MF 8S series of tractors 

promises to be exactly what farmers want >> Page 14 

,!3BD0A6-aaejdg!:L;k 

$152,900 $43,450 NEG 

$110,000 $80,000 

2017 New Holland T7-10 Autocommand. 

1650hrs, 50kph Vario trans • VIC 0402 851 544 

1993 Delvano STM. Self-prop sprayer, 4WD, 

Perkins turbo 105hp • TAS 0439 304 542 

2001 John Deere 9750 STS header. 2623 hrs, 

incl spreader + more • NSW 0429 667 270 

35,185+ 

items for sale 

in print & online 

2014 Lely RPC245 Tornado round baler. 

Stored under cover • NSW 0428 633 647 

6,910+ 

Trucks, utes and 

4x4s now for sale!

MAKE THIS 

HARVEST EXTRA 

REWARDING 

REWARDING YOU AND YOUR EQUIPMENT 

Keep your machinery running stronger for longer with high performance 

Shell lubricants and reward yourself with: 

ρ Shell Rimula Mini YOYO Bluetooth Speaker 

ρ St Johns Portable First Aid Kit 

ρ 30L Collapsible Cooler Bag 

These great rewards are available when you purchase Shell Rimula R4 L, Shell Rimula R4 X 

or Shell Spirax S4 TXM in the quantities tabled below, from participating stockists.* 

– PURCHASE – 

3 X 20L PAILS 


2 X 209L DRUMS 


1 X 1000L IBC 

– TO RECEIVE – 

BLUETOOTH SPEAKER 


FIRST AID KIT & 

COOLER BAG 


BLUETOOTH SPEAKER, 

FIRST AID KIT & COOLER BAG 

SHELL LUBRICANTS 

TOGETHER ANYTHING IS POSSIBLE 

*Terms and Conditions apply. Special offer is available from selected Distributors and Resellers and is valid for orders received and paid for between 9am, 7 September 2020 and 5pm, 27 

November 2020 or while stocks last. There is a total maximum of 1000 mini speakers and 600 first aid kits and 600 cooler bags available in this Promotion. The offer is not valid with any other offer 

or promotion. Full Terms and Conditions are available at vivaenergy.com.au/2020harvest. Shell Rimula and Shell Spirax are trademarks of Shell Brands International AG and are used under licence. 

The Promoter is Viva Energy Australia Pty Ltd (ABN 46 004 610 459) of Level 16, 720 Bourke Street, Docklands VIC 3008.

CONTENTS 

New business 

advertising 

Email newsales@bauer-media.com.au 

or call the state representative below 

Private advertising 

ADVERTISE tradefarmmachinery.com.au/sell 

EMAIL privateads@bauer-media.com.au 

PHONE 1300 362 272 

Advertiser services 

1300 362 355 

Editorial 

EDITOR Andrew Hobbs 

ahobbs@bauer-media.com.au 

DEPUTY EDITOR & DCM Harrison Hunkin 

hhunkin@bauer-media.com.au 

CONTRIBUTORS 

Jaiden Drought, Brent Lilley, Gary Northover, 

Trevor Wittington 

EDITORIAL DESIGN Daz Woolley 

SUB-EDITOR Cat Fitzpatrick 

EDITORIAL AND NEWS: 

73 Atherton Rd, Oakleigh, VIC, 3166 

Tel: 0429 530171 

Email: ahobbs@bauer-media.com.au 

Digital 

PRODUCER Michael Cahill 

Marketing & 

distribution 

MARKETING MANAGER Andrew Amato 

CIRCULATION MANAGER Stuart Jones 

Advertising 

INDUSTRY SALES MANAGER 

Adrian Christian 0423 761 784 

achristian@bauer-media.com.au 

GROUP SALES MANAGER 

Carl Rakusin 0409 838 984 

crakusin@bauer-media.com.au 

QLD Emily Schultz 0466 317 555 

eschultz@bauer-media.com.au 

SA/WA Nick Lenthall 0439 485 835 

nlenthall@bauer-media.com.au 

VIC/TAS Matt Carey 0438 359 109 

mcarey@bauer-media.com.au 

NSW Ben Coleman 0466 545 664 

bcoleman@bauer-media.com.au 

Finance 

SENIOR ACCOUNTANT Andrew Hughes 

Executive Group 

GM – PUBLISHING Terry Williams-King 

GM – INDUSTRY Graham Gardiner 

COMMERCIAL CONTENT 

DIRECTOR Matt Rice 

OPERATIONS MANAGER Regina Fellner 

DIGITAL DIRECTOR Tim Kennington 

FINANCE MANAGER Cain Murphy 

PEOPLE & CULTURE 

MANAGER Nicola Ramsay 

Subscriptions 

Tel: 136 116 Fax: 02 9267 4363 

Web: magshop.com.au 

Farms & Farm Machinery Subscription 

Reply Paid 4967, Sydney, NSW, 2001 

For advertising terms 

& conditions: 

www.industry.bauer-media.com.au 

ISSN 1449-6399 

Farms and Farm Machinery is published by Bauer 

Trader Media, a division of Bauer Media Limited. ABN 

18 053 273 546, 54-58 Park Street, Sydney, NSW, 

2000. All material in Farms & Farm Machinery is 

protected by the Commonwealth Copyright Act, 1968. 

No material may be reproduced in part or in whole 

without written consent from the copyright holder. 

*Recommended maximum retail price. Distributed by 

Ovato Distribution. Printed by IVE Print, QLD. 

14 

News 

06 Ryegrass drives Spartan II changes 

08 G6 Crop Cruiser S2 coming soon 

10 Case IH AFS Connect Magnum 

12 Aeration Control’s better grain storage 

14 Cover Story: MF 8S Series 

16 CFMoto’s new quad bike lineup 

18 SlurryKat launches reeler range 

20 Manufacturing sees boost 

21 Limits lifted on Thai potato exports 

28 Brisbane Truck Show 2021 

30 DDT deferred to 2021 

Reviews 

34 Second Impressions 

Deutz-Fahr four-cylinder 6 series 

38 No Till Plenty of Thrill 

Weaving GD Drill 

Harvesters 

42 Grain Demand Spike Likely 

European grain production to drop 

44 Steady Results 

O’Connor’s highlights Case IH 

automated systems 

46 Ahead of the Curve 

John Deere’s new header lineup 

48 Record Holder 

Highest wheat yield yet 

50 Best of Both Worlds 

New Holland CH7.70 harvesters 

Harvester Reviews 

54 Raining Grain 

New Holland CR 10.90 

56 Unleash the Beast 

John Deere 7550i 

60 Command & Control 

Case IH Axial Flow series 

62 Cutting Edge 

New Holland’s FR780 Forage Cruiser 

Regulars 

22 Market analysis 

24 WAFarmers column 

26 Events calendar 

93 Plant & Equipment 

Cranes, compressors and more 

120 Private advertising 

List your item for sale + rates, 

deadlines and coupon 

121 Index 

34 

38 

50 

4 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

YOUR LAND DESERVES THE BEST. OUR LINEUP 

OF NEW BOBCAT COMPACT TRACTORS DELIVER 

EXACTLY THAT. 

CT1025 

CT2035 

CT20400 

| 26hp 

| 35hp 

| 38hp 

2.99% FINANCE * 

TIME FOR AN 

UPGRADE? 

WE WANT YOUR 

TRADE! 

*2.99% finance offered on Bobcat CT1025, CT2035 and CT2040 Compact Tractors on a 36 month chattel 

mortgage with 30% deposit required, followed by 36 equal monthly repayments and no balloon. Finance 

is subject to credit approval and is only available to approved ABN holders. Terms and conditions apply. 

For further details, contact Clark Equipment. Offer ends 30/09/2020, while stock lasts. 

www.bobcatofaustralia.com.au 

clark@clarkequipment.com 

1300 736 848 

Bobcat Australia 

bobcatofaustralia 

Bobcat Australia

PRODUCT NEWS 

ryegrass revolution 

Great Plains made a few 

changes to its Spartan II 

triple disc, no-till air drill 

range for the Australian 

market – and ryegrass was 

the reason behind one of 

them. By Andrew Hobbs 

Above: The 2020 NTA607-2 Spartan II 

Following feedback from Australian buyers, Great Plains has 

revised the hydraulic circuit design and installed a new 

blockage monitor system on its Spartan II air drill range. 

Available in six-metre and nine-metre versions, the Spartan II 

has been distributed locally by Great Plains’ parent company 

Kubota since 2018, with Great Plains product manager John 

Moloney saying the company had learned from its experience in 

Australia when redesigning the product. 

“A very unique thing to the Australian market is the amount 

of ryegrass that gets drilled… it was certainly something Great 

Plains had to take some time to learn about, because they 

don’t do that amount of pasture seed in the US or any of their 

other markets,” says Moloney. 

While the Spartan II’s hardware was able to plant ryegrass – 

which has smaller and less dense seeds than cereal crops – the 

blockage monitors, which kept track of how many seeds were 

planted, sometimes struggled to detect them. 

“So what we had to do was create a software update on the 

machine to capture more bytes of information from those 

blockage sensors and feed it into our system, to give it a whole 

new level of accuracy,” Moloney says. 

“The nice thing about the software update is we can roll it out 

to other Spartan II machines as well… you just plug a USB into 

the terminal and it will download the new software version and 

apply it onto the user terminal. 

“The software will be rolled out towards the end of this year 

and is something that we want on all the machines come next 

autumn,” he says. 

A different software update also supports the use of 

prescription maps for variable rate application to ensure 

growers get the highest value from every seed. 

Moloney says Great Plains also revised its hydraulic 

circuit design to improve the Spartan II’s active row-unit 

down pressure system, which recalibrates every time it is 

activated to ensure seeds are planted at the correct depth for 

best results. 

“The main feedback that we had from customers was that 

the machine was slow to raise when you came to the end of a 

run and slow to go back down when you put it back into work,” 

he says. 

“We just want a machine that works the way they would like it 

to work, so we just made some updates to this system to solve 

that problem, so that is taken care of now.” 

Other improvements include upgrades to a more durable 

18 ply rear castor tyre and a redesigned row-unit mounting 

bracket that increases durability and reduces maintenance 

requirements. 

The Spartan II is available with 15cm or 19cm row spacing and 

is capable of alternate row seeding, individual row shut-off and 

individual row depth control, as well as double-shoot capability 

– which Great Plains says makes it one of the most versatile 

compact no-till air drills on the market. 

“When I am talking to customers or dealers the key thing about 

the machine is its versatility, and that is what you need in the 

Australian market when you are dealing with a lot of different 

seed types,” Moloney says. 

flying high 

Upgrades to Pöttinger’s 

Jumbo loader wagons 

bring extra reliability 

and power saving to a 

trusted model 

Above: An eye-catching new look for the 

Jumbo 7220 Combiline 

New features on Pöttinger’s redesigned Jumbo loader wagon 

range, now available Australia-wide, will help cater to 

shrinking harvest windows, the company says. 

The four models in the Jumbo Combiline loader wagon range 

boast a new loading system, with controlled pickups and cam 

control tracks at either end. 

Designed with capacities of between 33–48 cubic metres, and 

suitable for tractors of between 160 and 450 horsepower (119 to 

336kW), the loaders are designed to suit almost any property. 

The number of tine rows has decreased, from eight to seven, 

but the thickness of the tines has increased, from 5.5mm 

to 6mm, Pöttinger Australian territory manager Benjamin 

Mitchell says. 

“That has increased the lifespan of the tine by up to 20 per 

cent,” he says. 

“The seven row pick-up is controlled from both ends by 

steel cam tracks. This ensures clean forage with low levels of 

contamination, and the withdrawal point is close to the rotor, 

allowing the forage to be transferred smoothly. 

“Also thanks to the reduced speed of the rotor, the forage is 

precisely fed, not dragged through. This guarantees maximum 

performance at high driving speeds and in differing conditions,” 

he says. 

With a 2m standard width, the Jumbo also comes with the 

optional SuperLarge pick-up, with a 2.36m collection width, 

hydraulic folding jockey wheels and two heavy duty feed 

augers on each side, to bring the crop back in so it can go 

through the rotor. 

Able to handle even a wet or short crop, the rotor is mounted 

directly on the chopping system frame so that it is independent 

of the driveline, in order to protect the gearbox as much as 

possible, even under heavy load. 

The rotor guides the crop through a 34mm short-chop 

chopping system into the chamber, where Pöttinger has lowered 

the floor of the scraper by 150mm in a bid to reduce wear and 

power requirements during loading. 

“Thanks to the lowered scraper floor, the forage is lifted 

upwards as well as being drawn to the back – this results in the 

crop filling the loading chamber evenly, while reducing power 

requirements,” Mitchell says. 

“It has also improved the compaction of the forage. Now that 

the distance between the rotor and the scraper floor has been 

reduced, a compact stable pack of forage is formed at the front 

end of the loading chamber.” 

Within the loader, the Jumbo’s new Autocut automatic 

sharpening system can sharpen knives as needed within 

about four minutes – with the machine doing itself at the push 

of a button. 

“Having sharper knives means less power requirements and 

also means the product gets cut cleaner and it increases your 

capacity – you don’t have to slow down because you are cutting 

with blunt knives,” Mitchell says. 

“It sharpens every knife individually, which means you get a 

much more precision grind on each knife. It also reduces the 

amount of sparks.” 


TradeFarmMachinery.com.au 7 

SDLG WHEEL LOADERS 

RELIABLE 

PERFORMANCE 

“We don’t need all the bells and 

whistles, but we did need the wheel 

loader to be reliable — the LG936LA 

is exactly that.” 

- Scott Kapernick 

General Manager Operations 

Teys Australia Murgon 

TO VIEW OUR COMPREHENSIVE RANGE OF SDLG LOADERS CONTACT CJD EQUIPMENT ON 

1300 887 530 TODAY OR VISIT WWW.CJD.COM.AU! 

LG918 

6.2t 

LG936LA 

11.35t 

LG938L 

10.9t 

LG946L 

13.13t 

L958F 

17.5t 

LG978 

23.5t 

BIG ENOUGH TO TRUST SMALL ENOUGH TO CARE 

www.cjd.com.au | 1300 887 530 | enquiries@cjd.com.au 

Facebook.com/cjdequipment 

Linkedin.com/company/cjd-equipment 

Instagram.com/cjd_equipment 

Images are for illustration purposes only.

PRODUCT NEWS 

solid sequel 

With a more stable 

boom and increased 

capacity, the follow-up 

to Goldacres’ successful 

G6 Crop Cruiser will set 

new standards for the 

Australian sprayer market 

Above: The G6 Crop Cruiser 

Australian manufacturer Goldacres has started production 

on a new version of its successful G6 Crop Cruiser, which it 

says is faster, smarter and stronger than its predecessor. 

The G6 Crop Cruiser Series 2 comes with Goldacres’ new 

Tritech RivX boom, with a new design of the boom’s steel inner 

wings and aluminium/steel composite outer wings. 

Using high strength rivets instead of welding means the RivX 

outer wings can withstand 300 per cent more flexes than the 

equivalent welded boom, the company says. 

Available in widths of 36–42m and now the option of up to 48 

metres, the booms have a hydraulic outer-boom wing folding 

mechanism that includes a hydraulics breakaway feature to 

protect the boom in the event of a collision with an object. 

On top of this, Goldacres is offering the new Autoboom XRT 

radar sensing technology, which keeps the boom at an optimal 

spray height, with simultaneous ground and crop detection as 

an option. 

The XRT is not affected by temperature, spray drift, dirt, dust 

or mud and is ISOBUS compatible, as well as having pressure 

based controls to allow for smooth boom movement. 

Goldacres has also redesigned its operator workstation area 

and fill system to reduce refill times in its main 6,000-litre tank 

by more than twice the fill rate of the previous model. 

Now fitted as standard, a 7.5cm transfer pump combined with 

high flow plumbing provides flow rates of up to 1,150L/min. 

A pressure transducer and electric 7.5cm ball valve are 

mounted after the fill pump outlet to control both the fill rate 

and tank level soft shut off. 

All other manual valves are used to direct the chemical from 

the transfer pump and the probe connection points, with neat 

chemical transfer done using a pneumatic twin diaphragm high 

capacity pump, which is fitted as standard. 

The pump features large diameter diaphragms to create large 

amounts of suction, ideal for high viscosity chemicals. 

The neat chemical can be delivered directly to the product 

tank or diverted to the 60L chemical induction hopper where 

it can be measured and then transferred to the product tank. 

Tests have shown 40L/min of high viscosity chemicals can 

be transferred. 

A larger 550L rinse water tank is now fitted for increased 

rinsing capacity, and the fuel tank has been increased in size 

by 50 per cent to 450L – giving the machine an even greater 

spraying range. 

With manufacturing work starting this month, Goldacres 

says the first deliveries of the finished units are planned for 

November. 

mow, ted, rake 2 YEAR 

WARRANTY 

new 

generation 

SILVERCUT 380 DISC MOWER SPIDER 4 - 15 METRE TEDDERS STAR 650 TWIN ROTARY RAKE 

$20,800 $28,900 

BULLET-PROOF 

CUTTERBAR 

- Bullet-proof shear pin protection 

on each rotor - Low-cost in field reset 

- Easy hydraulic flotation accurately 

follows the ground 

- Over-centre folded position 

for safe and balanced transport 

- Other sizes available 

FAST DRY, RETAIN 

QUALITY 

- Pivoting headstock 

- Rotor height/angle adjustable 

- Hydraulic fold to narrow width 

- Strong tubular tedder arms 

CLEAN PERFECT 

SHAPE 

- Adjustable raking width 

- Manoeuvrable rear steering wheels 

- Auto-flow axle with 3D levelling 

for perfect ground following 

- Modular arm system for easy maintenance 

- Other models available 

PROTECTION 

$0 

DEPOSIT 

SIP provides a large range of hay and silage machines: mowers, 

tedders, rakes and manure spreaders, with market leading features. 

Call Inlon to find the right machine for your application. 

*Offer ends 31st October 2020. While stock lasts. Finance available to approved 

purchasers only. All applications are subject to individual assessment at time of 

8 TradeFarmMachinery.com.au 

application. #Subject to eligibility. 

THE TRACTOR YOU WANT IS NOW EASIER TO FIND 

For more information and 

your nearest dealer 

1800 849 090 

www.inlon.ag/708

TradeFarmMachinery.com.au 9

PRODUCT NEWS 

new connections 

Now available Australiawide, 

the Case IH AFS 

Connect Magnum 

provides new options 

through new technologies 

and better connectivity 

Above: The new Case IH AFS Connect 

Magnum 

Inset: AFS Pro 1200 display 

Case IH is rolling out its AFS Connect Magnum tractor series 

across Australia and New Zealand, after a sneak peek at last 

year’s AgQuip Field Days. 

Equipped with updated features such as an automotive-style 

cabin as well as a refined armrest, the tractors are said to offer 

new levels of connectivity and remote monitoring. 

Case IH high horsepower product manager for Australia and 

New Zealand Alyx Selsmeyer says the new AFS Magnum allows 

farmers to precisely manage the farm, fleet and data anywhere, 

anytime from a desktop or tablet. 

“The AFS Connect portal is the key to this series of tractor, 

giving the customer a view of the field operations, fleet 

information and agronomic data from their preferred device, 

wherever they are, and also allowing for the sharing of this 

information with trusted third parties,” she says. 

The AFS Connect offers new innovations including remote 

display viewing and remote servicing from a Case IH dealer, as 

well as increased integration and customisation – allowing the 

operator to configure electronics to simplify day-to-day tasks. 

User definable short-cut keys, customisable remote paddles 

and the ISOBUS Aux-N compatible multi-function handle and 

joystick all help to reduce cab clutter, while the refined encoder 

knob, MultiControl Armrest and a MultiFunction Handle with 

four programmable hot key buttons, put control directly at the 

operator’s fingertips. 

Early feedback from Australian farmers has been promising, 

with farmer Daniel Elias saying he had been impressed with the 

Magnum’s performance during a four-month trial on his property 

near Tamworth, NSW. 

“The level of technology the tractor had was very evident, 

and one of the things I really liked was that while a lot of 

functions in previous models are factory-set, with the AFS 

Connect Magnum you can adjust the functions and adjust them 

easily,” he says 

“It had really good power to ground, rode really well and during 

cultivation it pulled nicely.” 

Matt Davey, who farms near Kadina in South Australia, added 

that he was impressed with the Magnum’s technical advances. 

“They’ve done a lot of good things inside with regards to the 

new-look cab and I really liked the new screen. Its features are 

impressive and there are things there that will definitely benefit 

less experienced operators,” he says. 

The AFS Connect Magnum will be available in 200 to 400hp 

(149 to 298kW) wheeled models, and 340hp, 380hp and 400hp 

(254kW, 283kW and 298kW) Rowtrac models. Contact your local 

Case IH dealership for more information. 

TRACTORS 

OFFER ENDS 30TH SEPT 2020 

WHILE STOCK LASTS 

10 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND 

For more information 

and your nearest dealer 

1800 849 090 

www.tym.ag/717

23 McCormick Road Kyabram Victoria 3620 / Ph: 03 585 22 444 / info@jnrengineering.com.au 

LP Series 

Introducing the LP8000, 8 meter or 6 meter 

width Land Plane, twin mast independent for lift 

precision, dragging capabilities of approximately 

5 cubic meters. 

DG Series 

The DG Series is currently being manufactured in 

3.6m or 4.2m width Drag Grader has independent 

lift for laser precision. Dragging capabilities of 

approximately 3.5-4.5 cubic meters 

Bale Bull Round 

The BBR maintains a strong robust design capable of handling 

the heaviest bales. This machine is capable of carrying two 

bales and feeds on both sides. It is one of the only machines in 

the market that is able to feed the toughest of silage bales 

HDE Ejector 

Cut Sizes 3.6 & 4.2m -Rips -Carries -Cross levels -Laser levels. 

www.jnrengineering.com.au 

Leopard Ejector 

Cut Sizes 3.0m, 3.6m & 4.2m-Rips -Carries -Cross Levels -Laser Levels. 

HDB Bucket 

Cut sizes 3.6m & 4.2m 

-Rips -Carries 

-Cross levels -Laser levels. 

LB Bucket 

Cut sizes 2.7m & 3.0m-Rips 

-Carries -Cross Levels -Laser 

Levels. 

Bale Bull Square 

Features an adjustable moving 

arm for feed out control and 

on road transport, capable of 

carring two bales. 

XSE Ejector 

Cut sizes 1.8m, 2.4m 

-Rips -Carries -Cross levels 

-Laser levels 

FFM-FP-5145966-TS-365 

For more info, check out our YouTube Channel and Facebook Page under JN&R Engineering

PRODUCT NEWS 

Left: Henk de Graaf’s team at Industrial 

Automation Group will work with fan 

suppliers and other parties to develop the 

right aeration system for any silo 

winds of change 

Using the right fans and 

a predictive algorithm 

15 years in the making, 

WA-based Aeration 

Control is helping 

improve grain storage 

across Australian silos 

Henk de Graaf, the managing director of Western Australiabased 

Industrial Automation Group, says the silo aeration 

system he and his team has developed can save grain-growers 

anything from $20–$40 per tonne. 

Built off the back of a grain aeration technology developed 

for WA’s Co-operative Bulk Handling, and further developed in 

collaboration with the CSIRO, today’s system uses a predictive 

algorithm to show what is happening inside the grain bulk within 

a silo. 

“One of the main things that sets our controller aside from any 

other controller on the market is that we actually insist that the 

farmer tells us what he puts into his silo in the first place,” de 

Graaf says. 

“If you don’t know what the grain has been doing inside the silo, 

how do you know the air that you are pumping in will actually 

cool it, or dry it?” 

Rather than operating a fan for a certain number of hours, de 

Graaf says his company’s Aeration Manager system takes a 

number of different factors into consideration – including the type 

of grain stored, its temperature and moisture levels when loaded. 

The company also factors in the fan capacity, the height of the 

grain column and ambient air conditions – adjusting the target 

temperature in line with the outside environment in a system De 

Graaf calls adaptive discounting. 

“In the process our controller actually tracks the cooling front 

as it moves through the silo, so at any given time we can give 

feedback to the farmer about what is actually happening on site,” 

de Graaf says. 

“What is actually happening is the controller is looking after itself, 

all the farmer needs to do is give the details of what he has got in 

the silo, the details of what he wants to achieve and press enter 

and the system will do it all by itself, you don’t need to do a thing.” 

Instead of selling an aeration system per se, de Graaf says the 

Aeration Manager team will work with different suppliers to 

provide a complete design and install package for individual silos. 

“The additional equipment that they would need to purchase in 

addition to our services, is just something that either they pay up 

front – and thanks to the federal government they can write it off 

in 12 months – or we can finance it as well,” he says. 

“We are guaranteeing that whatever we are selling you will do the 

job… there is no upfront fee for the controller, just a monthly fee. 

“In return for that monthly fee we not only provide the design 

and provide the control equipment, but we are also providing 

on-call assistance at all times, prime reporting facilities and even 

to the extent that we can look after someone’s silo while they are 

on holidays.” 

PROUDLY MADE IN ITALY 

INVEST IN QUALITY HAY 

MAKING EQUIPMENT. 

Suited to farmers and contractors, discover how Enorossi 

hay making equipment could benefit your land today. 

www.clarkfarmequipment.com.au 

sales@clarkfarmequipment.com.au 

1800 648 384 

Clark Farm Equipment 

clarkfarmequipment 

Clark Farm Equipment 


GERONIMO FARM 

EQUIPMENT 


LAND 

ROLLER 

SERIES 

READY TO ROLL. 

Harvest your crops worry free. Promote even germination. Crush crop residue. 

The Land Roller series applies uniform weight and surface contact across your fields, 

pushing rocks into the ground and leveling out clumps. The resulting smooth surface 

provides even germination, faster spraying, robust crops, and a trouble-free harvest. 

2 

4 

3 

1 

LAND ROLLER FEATURES 

1 - Large Diameter Drums. 

Larger drums provide an ideal combination of weight and 

size to smooth the field without compaction. 

2 - FORWARD Unfolding System. 

The patented unfolding system goes from transport to field 

mode in minutes while moving forward. 

3 - Shorter Drum Segments. 

Each drum floats independently, applying consistent ground 

pressure and following the contours of your land. 

4 - Pull Equipment in Tandem. 

The FORWARD TM Unfolding System allows you to pull two or 

more pieces of equipment in tandem, so you can work faster. 

MADE TO WORK. BUILT TO LAST. 

RM6710171 

Ashley Webster 

Ph: 0407 431 566 

Head Office - 77 Pridham Street, Cowra 

Office Number: 02 6341 3369 

Email: sales@geronimo.com.au 

Web: www.geronimo.com.au 

Chris Sweeny 

Ph: 0417 537 482

COVER STORY 

1 

HIGHER 

power 

Australian and New Zealand 

buyers will be able to get 

their hands on Massey 

Ferguson’s new 200+ 

horsepower tractor range 

in early 2021 

[Customers] told us 

they need a tractor 

that is comfortable, 

with unrivalled visibility, 

efficient, easy to use 

and smart. 

Following seven years of testing around the globe, Massey 

Ferguson has formally launched its MF 8S series of tractors, 

after allowing a sneak peek at Agritechnical 2019. 

The MF 8S series comprises four new models, all with a new 

interpretation of the iconic MF grey sabre stripe on the side and 

horse head collar motif on the bonnet, which dates back to the 

MF 100 series. 

Built on a 3.05m wheelbase, they offer maximum power from 

205hp to 265hp (153kW to 198kW), all with an extra 20hp (15kW) 

from Engine Power Management (EPM). 

At the same time, Massey Ferguson introduces a new numbering 

system. For example, in naming the MF 8S.265 model the 8 stands 

for the Series, the S stands for the specification level and the last 

three digits are the maximum power. 

Massey Ferguson Australia and New Zealand product manager 

John Horan says the tractor marks a new era for the brand, with a 

new design that makes it straightforward and dependable, in line 

with operator demand. 

“[Customers] told us they need a tractor that is comfortable, with 

unrivalled visibility, efficient, easy to use and smart,” Horan says. 

COMFORT, VISIBILITY AND CONNECTIVITY 

Inside the air-conditioned cab, with a 6.6 square metre glass 

area and an interior volume of 3.4 cubic metres, operators can 

enjoy a new high-quality seat that is auto-air suspended, heated, 

ventilated and equipped with lateral damping, and has an optional 

leather covering. 

Replacing the dashboard with the new digital ‘MF vDisplay’ 

terminal fitted to the right pillar, leaves just the steering wheel and 

Power Control lever in front of the driver, providing exceptional 

forward visibility over the slim, super wasp-waisted bonnet, says 

Massey Ferguson. 

The new Control Centre armrest, fitted with the latest easyto-use 

MultiPad lever, provides complete fingertip control. This 

ISOBUS-compatible lever operates all the tractor functions and 

includes an integral micro-joystick to control two spool valves. 

The updated 23cm-wide Datatronic 5 touch-screen terminal is 

a single screen system for controlling the tractor functions and 

managing MF technologies. 

HIGH PERFORMANCE AND EFFICIENCY 

The MF 8S’s Stage V Agco Power six-cylinder/7.4-litre engines 

deliver more power, torque and performance at low rpm, reducing 

operating costs. Massey Ferguson’s All-In-One after-treatment 

technology and with hydraulic tappet adjustment, which are both 

maintenance-free, help reduce running costs. 

Maximum power is generated already at 1,000 rpm and it is 

constant up to 1,500 rpm – providing high performance at low 

engine speeds that cuts fuel consumption by 10 per cent and noise 

by up to 6dB, it adds. 

All-In-One integrated selective catalytic reduction with a soot 

catalyst is a fully integrated system that does not require the 

use of a diesel particulate filter or complex variable geometry 

turbocharger. Designed to last the lifetime of the tractor, this 

compact unit, mounted outside the tractor, ensures visibility 

remains completely unimpeded and the exhaust pipe is even 

slimmer than before, says the company. 

UNIQUE ENCAPSULATED ENGINE 

With a 24cm gap separating the cab from the engine, the 

‘Protect-U’ concept cuts noise to just 68 decibels, insulating it from 

noise, heat, and vibrations, says Massey Ferguson. 

Air drawn in from the centre of the tractor, behind the engine, is 

cleaner than that from the standard position. This clean air helps 

reduce the load on the main air filter, while optimising engine 

performance. 

This innovative design greatly improves accessibility for cleaning 

the radiators too. Making it easier to carry out regular maintenance 

will improve reliability and helping reduce downtime, says the 

company. 

EASY TO USE TRANSMISSIONS 

Transmission options include the Dyna E-Power dual clutch gearbox, 

which Massey Ferguson says combines the advantages of a 

continuously variable transmission with the ability to transmit power 

as efficiently as a mechanical transmission. Offering four ranges 

with seven gears, the Dyna E-Power reduces power losses by up to 

26 per cent at higher speeds when compared with the previous MF 

7700 S Dyna-6, as well as up to 10 per cent of fuel savings. 


COVER STORY 

2 

3 

4 

5 6 

The tractors can also achieve top speeds at low rpm – 50km/h 

at 1,500rpm and 40km/h at 1,200rpm – further improving fuel 

efficiency and reducing noise. 

Gears change seamlessly, smoothly and efficiently, with only a 

9 per cent gear ratio difference between each speed in field work 

applications from 5km/h to 20km/h. 

The other option is the new Dyna-7 semi powershift gearbox, 

which MF says is about 10 per cent more efficient than the Dyna- 

6 – with one extra powershift gear and a total of 28 forward and 

reverse speeds in four ranges and seven seamless gears. 

GREATER TRACTION 

All Massey Ferguson MF 8S series tractors are built on a 3.05m 

wheelbase with a strong rear axle and suspended front axle as 

standard, offering up to nearly 10 per cent more traction power 

and a 5.7m turning radius. 

New wheel specifications now include the ability to fit up to 

2.05m diameter rear tyres, including the brand-new option of 

VF650/75 R42 Trelleborg TM1000 PT. 

Three-point linkage capacity is increased by 7 per cent to 

10,000kg and, with powerful new hydraulics, these tractors handle 

and operate large, wider implements. 

A 150 litre/min closed-centre, load-sensing hydraulic system 

is standard, providing 36 per cent more flow compared with the 

previous system. A 205L/min flow is an option, which can also 

be supplied as an ECO version, generating the flow at 1,650rpm 

(230L/min at max at rated engine speed). Up to five electronic rear 

spool valves can be specified. 

All models come with a four-speed power take-off as standard, 

providing a choice of 540, 540ECO, 1,000 or 1,000ECO, which 

means operators can always select the right speed for power 

or economy. 

A new 4,800kg capacity front linkage option, fully integrated into 

the tractor, comes with the option of an ISOBUS socket. 

100 PER CENT CONNECTED 

All MF 8S Series tractors come with a three-year licence to use 

the MF Connect Telemetry system, which transfers data such 

as the machine’s position, error messages and service alerts 

to the MF Connect Cloud as well as users and dealers (with 

permission). 

An optional Fieldstar 5 terminal can be used to manage all 

the MF Technologies– including MF Guide, while MF Section 

and Rate Control can now handle up to 36 sections and five 

products. It now also records the field boundaries and provides 

automatic field detection. 

MF Task Doc and Task Doc Pro automatically record and 

wirelessly transfer the gathered information and data, as well as 

creating application plans and working with farm management 

software. With NEXT Machine Management, data can be simply 

and securely transferred wirelessly via the Agrirouter Cloud. 

SUPERB SPECIFICATIONS 

MF 8S Series Exclusive specification models will be available 

at the end of this year. These will be expanded with the 

introduction of the Efficient versions in early 2021, along with 

the Dyna-VT (CVT) transmission option for all models later in 

2021. 

The Exclusive specification is a comprehensive package 

providing operators with exceptional comfort and ease of use, 

as well as genuine performance enhancing features to increase 

productivity and efficiency. 

As well as a choice of the Dyna-E Power or Dyna-7 

transmission, Exclusive models come equipped to a high 

specification, including MultiPad control lever, five electric 

spool valves with fingertip switches and joystick. It is MF Guide 

ready, with MF Task Doc recording and, in common with all MF 

8S Series, it includes MF Connect telemetry with a three-year 

subscription. 

1. The MF 8S series comprises four new 

models 

2. With a 24cm gap separating the cab from 

the engine, the ‘Protect-U’ concept cuts 

in-cab noise to just 68 decibels 

3. MF 8S Series Exclusive specification 

models will be expanded with the 

Efficient versions in early 2021 

4. The new Control Centre armrest, with 

updated Datatronic 5 touch-screen 

terminal 

5. Replacing the dashboard, the MF 

vDisplay shows tractor information at a 

glance - and scrolling through settings is 

by a rotary knob by the steering wheel 

6. The MF 8S’s Stage V Agco Power sixcylinder/7.4-litre 

engines deliver more 

power, torque and performance at low 

rpm 

Built on a 3.05m 

wheelbase, they offer 

maximum power from 

205hp to 265hp (153kW to 

198kW), all with an extra 

20hp (15kW) from Engine 

Power Management 

(EPM). 

Model MF 8S.205 MF 8S.225 MF 8 S.245 MF 8S.265 

Engine 

AGCO Power – Stage V – All-in-One technology 

Engine capacity 

Six-cylinder, 7.4 litre 

Transmissions 

New Dyna E-Power Dual Clutch or Dyna-7 Semi-Powershift 

Max power @ 1,850rpm 205hp 225hp 245hp 265hp 

Max power EPM 225hp 245hp 265hp 285hp 

Max torque @ 1,000/1,500rpm 900Nm 1,000Nm 1,100Nm 1,200Nm 

THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 15

PRODUCT NEWS 

Left: The CForce 625 EPS Touring 

(pictured) and the CForce 625 offer new 

features for farmers 

rugged rider 

CFMoto’s new quad bike 

range offers better ride 

performance and improved 

brakes, as well as the 

Quadbar OPD device 

fitted at sale 

CFMoto has released two new all-terrain vehicles (ATVs), the 

CForce 625 EPS and 625 EPS Touring edition, which its local 

distributor says will be ideal for Australian farmers. 

In line with commitments announced earlier this year, the 

company says both models will be sold in compliance with 

forthcoming Australian safety standards – including the 

necessary decals, hang tags and rollover protection device, 

manufactured by Quadbar. 

With new styling, new LED lights and a stronger chassis, the 

new models showcase CFMoto’s ability to build world-class 

ATVs, Australian distributor Michael Poynton says. 

“The new CForce 625 EPS and 625 EPS Touring models are sure 

to be well received amongst Aussie farmers,” he says. 

“Both are incredibly well constructed and ready to tackle our 

harsh working conditions.” 

The CForce 625 EPS is a short wheelbase quad bike available 

in Silver and the CForce 625 EPS Touring is a longer wheelbase 

version to accommodate two people. 

The Touring model also offers a few more features over the 

short wheelbase model, including a backrest with grab handles 

for the passenger seat, a new camouflage colour scheme 

and new 12-inch (30.5cm) black alloy wheels, all for a $500 

difference in the purchase price. 

Among a series of improvements made to the models are 

a newly designed dual A-arm suspension for better ride 

performance and all new four-wheel hydraulic disc brakes. 

The swing arm point locations have been moved to improve 

the dual A-arm suspension movement, which CFMoto says has 

vastly improved the turning circle on both models, for greater 

manoeuvrability around the farm. 

Both models are powered by a 580cc, single cylinder, liquid 

cooled, Bosch EFI, four-stroke engine that produces 40 

horsepower (29.4kW), with high and low range, switchable 

2WD/4WD drive modes and front differential lock available 

for rugged environments and easily accessed by the touch 

of a button. 

The models are equipped with four-wheel hydraulic disc 

brakes with an added combined braking system for safer 

stopping power. 

Additional highlights include fresh new modern exterior 

design with bright LED lights, new heavy-duty carrier racks with 

integrated quick release service covers, large digital dashboard 

with even mobile phone Bluetooth connectivity. 

All CFMoto ATVs are backed by a two year warranty and 

supported by a national dealer network of over 80 outlets. 

progress made 

Trelleborg’s TM1000 

Progressive Traction tyres 

bring more power and less 

soil compaction to 

the ground 

Above: The 2.05m TM11000 Progressive 

Traction tyres offer more traction and less 

soil compaction, its manufacturer says 

Tyre manufacturer Trelleborg has released its TM1000 

Progressive Traction farm tyre in a new size, matching the 

newly-released Massey Ferguson 8S tractor. 

The MF 8S can fit rear tyres up to 2.05m in diameter, 

including the brand-new option of VF650/75 R42 Trelleborg 

TM1000 PT, Massey Ferguson says, with VF 600/70 R30 tyres 

suited to the front. 

Speaking at the product launch, Agco’s director of marketing 

for Europe and the Middle East, Asia and Africa Francesco 

Munro lauded the arrival of the new product. 

“Our new 2.05m tyre offering from our Trelleborg partners, 

the TM 1000 Progressive Traction, (offers) more comfort, more 

traction, less soil compaction,” he says. 

The company had also supplied tyres to the MF Next Concept 

tractor, a precursor to the MF 8S, displayed at agricultural trade 

fair Agritechnica in 2019. 

Trelleborg added its Progressive Traction technology to its 

flagship TM1000 tyre last year, saying the design will release 

additional power to the ground and make tractors better on 

the road. 

Trelleborg global research and design director for agricultural 

tyres Piero Mancinelli says the system can do this while 

reducing soil compaction at the same time. 

“We have taken the decision to upgrade the tyre line to VF 

technology, enabling a higher load capacity of up to 40 per cent 

when compared to a standard tyre, or up to 40 per cent lower 

pressure on the field, reducing soil compaction,” he says. 

“The special double-edged tread design was engineered 

to decrease the tread vibration contributing to lower energy 

dissipation, minimising fuel consumption while extending the 

life span.” 

The tyres were also recognised as “Best Agricultural Tyre” at 

the Hevea Tire Industry Awards 2019, held in January this year in 

Spain, winning with 38.2 per cent of all votes cast. 



Disc & Drum Mowers 

Mow up to 9.4 mtr widths 

Steel on Steel conditioning rollers now available 

Rakes & Tedders 

Working widths up to 8.4 metres 

Contact your local dealer for more information 

O’Connors 

• Bordertown SA 

• Condobolin NSW 

• Corowa NSW 

• Forbes NSW 

• Grenfell NSW 

• West Wyalong NSW 

• Birchip VIC 

• Horsham VIC 

• Shepparton VIC 

• Warracknabeal VIC 

Central Hills Machinery 

Traders 

• Mount Barker SA 

Geronimo 

• Dubbo NSW 

• Walgett NSW 

• Moree NSW 

• Northam WA 

TTMI 

• Trafalgar VIC 

• Maffra VIC 

• Leongatha VIC 

• Longford TAS 

SEQ 

• Kalbar QLD 

Greg Allan Farm Machinery 

• Colac VIC 

Jakab Motors 

• Cohuna VIC 

www.samasz.com.au 

Imported by Colac Agricultural Company P/L 

Colac, Vic 0352316999 

logo C70 M5 Y90 K20 R73 G143 B57 PANTONE 7741 C RAL 6017 

V-Twin Basket Rakes 

upto 9.5m raking Width 

Trailed and Tube Bale Wrappers 

Wraps bales up to 1.8 mts in diameter and 1600 kg 

Contact your local dealer for more information 

O’Connors 

• Bordertown SA 

• Condobolin NSW 

• Corowa NSW 

• Forbes NSW 

• Grenfell NSW 

• West Wyalong NSW 

• Birchip VIC 

• Horsham VIC 

• Shepparton VIC 

• Warracknabeal VIC 

Days Machinery 

• Casino 

Central Hills Machinery 

Traders 

• Mount Barker SA 

Geronimo 

• Dubbo NSW 

• Walgett NSW 

• Moree NSW 

• Northam WA 

JGW 

• Cowra NSW 

TTMI 

• Trafalgar VIC 

• Maffra VIC 

• Leongatha VIC 

• Longford TAS 

SEQ 

• Kalbar QLD 

Greg Allan Farm Machinery 

• Colac VIC 

• Wagga Wagga NSW Jakab Motors 

• Cohuna VIC 

Milne Brothers 

• Rockhampton QLD 

• Emerald QLD 

• Biloela QLD 

• Mackay QLD 

Honeycombes 

• Ayr QLD 

• Cairns QLD 

• Ingham QLD 

• Innisfail QLD 

• Tolga QLD 

• Townsville QLD 

www.elhoaustralia.com.au 

Imported by Colac Agricultural Company P/L 

Colac, Vic 0352316999 

FFM-FP-5012885-TS-389

PRODUCT NEWS 

Left: SlurryKat’s new front reeler range, 

including this 1,000m unit, is designed to 

be light and strong. 

real difference 

Double drive system offers 

more power, with front 

reeler changes made 

to save time and effort, 

SlurryKat says 

Slurry equipment manufacturer SlurryKat has launched a new 

series of front reeler models which the company says have 

been redesigned following customer feedback. 

SlurryKat chief executive Garth Cairns says the reels have a 

completely new design, with high grade steel for lighter weight 

and increased strength. 

“We have manufactured the reels 30 per cent lighter than the 

very successful previous generation of SK front reelers, which 

we designed and introduced in 2008,” he says. 

Three models are available in the new range, with hose 

capacities of 600m, 800m and 1,000m; all with spools galvanised 

as standard and with two-pack paint on the chassis. 

Each model is equipped with new coupling sockets that clamp 

the hose for the start of the rolling up process without the 

coupling being displaced. 

The reelers are open section as standard with bolt-in adjustable 

sections. Each section can be placed to the desired width and 

adjusted by sliding it along the reel by simply loosening the 

two bolts. 

They also have new ergonomic fastening hooks on the sections 

and the reel ends for tying the hose ends to after hose recovery 

has been completed. 

The powered drive system has also been improved giving more 

torque for rolling hoses; and a double drive system, using two 

high powered Danfoss hydraulic motors, can be added for the 

600m and 800m versions when using six inch (15cm) hoses. 

Available as standard on the 1,000m model, the double 

drive system can reel up larger hoses, even when slurry is 

left in the hose. 

When parked and detached from the tractor, operators will 

only need to use two parking stands, rather than the previous 

four – a change made to help save valuable time when coupling 

and uncoupling, Cairns says. 

Parking ground clearance to the linkage pins has been 

increased by 200mm, meaning large tractors with bigger front 

tyres can couple and uncouple without having to set the reelers 

up on blocks. 

“This was an issue on the previous models as the front linkage 

on the bigger tractors does not lower as much as those on 

smaller tractors,” Cairns says. 

“Listening to feedback from the customers we were happy to 

implement those design improvements.” 

SlurryKat products are distributed in Australia through 

Saunders Ag Contracting, based in Victoria. 

Green One 

GrainRite 

Self Propelled Augers 

are designed and built strong and tough in Australia 

for Australia’s demanding conditions. Finger tip 

hydraulic controls allow the operator to raise & lower 

each end, ground drive, and steer. 

Heavy duty barrel and frames reduces operation 

vibration considerably - less vibration means less grain 

damage. Reverse gear box with positive lock allows 

quick and easy cleanout. 

All our augers come standard with highway lighting, 

oversize sign, new 10 ply tyres, aluminium mud guards, 

fire extinguisher, drop spouts, cast iron pulleys, and 

many more features and options. 

GrainRite Augers have a 10.75” width barrel that is 

2.5mm thick. GrainRite Augers are available in 35’, 

50’ & 60’ lengths. 

FFM-HH-5014229-TS-314-XCC 

Call 03 5397 5200 

or email us at info@grainrite.com.au 

www.grainrite.com.au 


INDUSTRY NEWS 

Left: Demand for machinery helped lift Australian 

manufacturing in July. Image courtesy Alamy 

demand boosts 

manufacturing 

JobKeeper and instant 

asset write-offs help 

buoy machinery 

and equipment 

manufacturing – with 

particular demand for 

transport and agricultural 

equipment 

Higher demand for machinery and equipment has boosted 

Australian manufacturing in July, according to new 

information released by the Australian Industry Group (Ai Group). 

Following a rise in June, the Group’s Australian Performance of 

Manufacturing Index (Australian PMI) rose again by 2.0 points to 

53.5 in July – the first two-month rise since October last year. 

PMI readings above 50 points indicate an expansion in activity, 

with higher results indicating a faster rate of expansion. 

The data showed the rise was led by the machinery and 

equipment sector – which covers everything from transport 

goods and professional and scientific equipment to pumps, 

compressors and domestic appliances – which was up 3.2 

points to 54.3 points. 

However, this was not enough to push the sector’s long-run 

average (calculated over 13 months) into positive territory, sitting 

at 49.6, compared to the PMI trend of 50.4. 

Australian machinery and equipment manufacturers produced 

$20.5 billion in real value-added output in the year to the first 

quarter of 2020, employing about 179,000 people, or 20 per cent 

of all Australian manufacturing workers. 

Ai Group chief executive Innes Willox says a number of factors 

are behind the rise. 

“The performance of the sector was in part due to stimulus 

measures including JobKeeper and the extension of the instant 

asset write-off arrangements which boosted sales and orders in 

the machinery and equipment sector,” he says. 

“Against the positive signs from the manufacturing sector, the 

winding down of stimulus from September, the impact of the 

Melbourne lockdown and the severity of the outbreak, as well as 

tougher border restrictions are likely to weigh on the sector in 

coming months. 

“Manufacturing employment, production and new orders were 

all higher than in June, although the pace of improvement in 

new orders slowed over the month. Unfortunately, exports were 

again weaker in July,” he says. 

Despite the success of the machinery and equipment and food 

and beverage (up 1.9 points to 59.4) sectors, they were the only 

manufacturing groups to grow – with the other four contracting 

in July, due to weakness in the construction sector and the 

impacts of COVID-19. 

However, manufacturers across the board did notice increased 

interest in locally-made manufactured goods, amid rising new 

orders for transport and agricultural machinery and equipment, 

Ai Group says. 

Australian PMI results are based on responses from a national 

sample of manufacturers that includes all states and all subsectors. 

ONE PERSON, ONE TRACTOR 

JADAN COLLECTING & 

STACKING SOLUTIONS 

Jadan offers high-performance hay handling systems that are 

specifically designed for the farming market in Australia. These 

simple and robust machines create efficient and faster hay 

handling systems that take the sweat out of handling bales. 

BIG BALE STACKER 

ACCUMULATOR & GRAB 

1300 523 263 | www.jadan.net.au 

Scan here to watch videos, 

or visit www.jadan.net.au/videos 

20 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND 

FFM-HP-5168397-TS-375

INDUSTRY NEWS 

Thai tariffs 

tumble on taters 

Potatoes make up more than a quarter of 

Australia’s vegetable exports to Thailand 

No tariffs or volume limits will apply to Australian exports of 

seed and processing potatoes to Thailand under a recent 

change to the Free Trade Agreement. 

The changes to the Thailand-Australia Free Trade Agreement 

remove both tariffs and the tariff rate quotas that limited the 

amount of potatoes able to be sold at a lower tariff rate – 115 

tonnes in 2019. 

Processing potatoes, used in the production of chips and 

other products, can be sold to Thailand from all Australian 

states under the current agreement, subject to phytosanitary 

requirements, while only seed potatoes from Victoria, South 

Australia and Western Australia are currently approved for 

import. 

The rate of tariffs has decreased on an annual basis since 2005, 

when they were 27 per cent, and come amid a major expansion 

of Australian vegetable exports to Thailand, rising 64 per cent 

since 2015. 

Thailand was Australia’s second largest potato market in 2019, 

behind South Korea, with an export market worth $4.6 million – 

over a quarter of the $17.8 million worth of Australian vegetable 

exports to Thailand last year. 

In an announcement, Australian agriculture minister David 

Littleproud says the outcome is “fantastic” for exporters and 

producers with well-established relationships with Thai buyers. 

“This is an important market access improvement for the 

Australian potato industry,” he says. 

The news has also been welcomed by Australian vegetable 

and potato grower industry body AusVeg, with national manager 

for export development Michael Coote saying the change puts 

Australian growers in a strong position to take advantage of new 

opportunities in the country. 

“Even in the midst of the current economic climate, demand 

has continued to be strong for Australian fresh vegetables and 

potatoes in export markets, with enquiries still coming in from a 

range of international trading partners,” he says. 

“Australian potatoes and vegetables enjoy a positive reputation 

in international markets for quality and reliability of supply. 

“The industry has seen positive export growth in recent years 

and it is important that we are able to continue to supply these 

markets during the COVID-19 disruption to maintain this hardwon 

market share.” 

Above: Australian seed and 

processing potatoes, used in readyto-eat 

potato snacks, can now be 

exported to Thailand tariff-free. 

Image courtesy Alamy 


MARKET NEWS 

Left: Strength in the horticultural space is boosting 

demand for tractors, such as this 95hp Massey Ferguson 

3709F 

small tractors shine 

Sales of tractors were strong in July as buyers around 

the country got back to work 

Gary Northover is executive 

director of the Tractor & Machinery 

Association of Australia (TMA). 

He can be contacted on 

(03) 9813 8011 or 

at gary@tma.asn.au 

The ongoing impact of the government’s Instant Asset Write- 

Off scheme saw July sales rise 24 per cent above July last 

year and brings year to date 21 per cent over 2019. 

Activity across the states was quite varied with the continued 

recovery in NSW the standout – up a whopping 60 per cent on 

the same time last year and now sitting 26 per cent ahead for 

the year. 

Victoria reported another strong month, up 34 per cent and 

now 30 per cent ahead year to date. Meanwhile, Queensland 

experienced its first dip in some months, down 7 per cent but 

still 14 per cent up for the year. 

Western Australia picked up another 5 per cent and now 

remains 3 per cent behind last year. 

Sales in South Australia continue to rally with another strong 

month, now 32 per cent up YTD, and Tasmania is flourishing, 

up 17 per cent for the month and now 24 per cent ahead for 

the year. 

The increase in sales numbers is due almost entirely to the 

ongoing strength in the smaller end of the market supported 

by the Instant Asset Write-Off scheme. The under 40hp (30kW) 

range was up 48 per cent for the month and now sits 20 per 

cent ahead for the year to date. 

The 40 to 100hp (30–75kW) range was again up strongly 29 per 

cent, now 21 per cent ahead for the year. 

The 100 to 200hp (75–150kW) category was healthy with the 

month up 6 per cent – 36 per cent for the YTD. The strength in 

the horticultural space is having a big impact on demand for this 

range strongly supported by the financial incentives in place. 

Sales in the large 200hp (150kW) plus range were again down 

another 7 per cent leaving this category 7 per cent behind YTD. 

Ongoing drought in northern NSW and southern Queensland 

has lessened demand, along with the feeling that the utilisation 

levels of the past few years may not have yet warranted largescale 

fleet replacements. 

Early signs are that international supply chains can meet 

Australian demand for new products, but the imposition of Stage 

4 restrictions in Victoria, which is a key machinery supplier, may 

complicate matters. While agricultural suppliers will continue 

operating, these restrictions will inevitably affect the way work 

is done. 

With regards to other products, sales of combine harvesters 

have now slowed, with most product now in place for the 

upcoming harvest season. The full year picture is likely to be 

around 15–20 per cent down on last year. 

Baler sales continue to boom and are up 33 per cent year to 

date, whilst sales of out-front mowers are healthy and remain 14 

per cent ahead of the same time last year. 

BYPY TRANSMISSIONS 

PTO Shafts and Gearboxes 

For all your power transmission requirements 

HORSEPOWER: 12 Hp TO 360 Hp - We have the best range in Australia 

We also stock an extensive 

range of spare parts for PTO 

shafts and gearboxes 

Call Toll Free 1800 932 113 

bypy@bypy.com.au | www.bypy.com.au 

BYPY Transmissions-Australian Distributor of Bondioli & Pavesi and BIMA 

FFM-HH-5190089-TS-369 


TKV: 

AUSTRALIA’S 

NEW CAMSO 

DEALER 

Australia’s only independent 

importer and distributor 

of the complete 

CAMSO rubber track & 

undercarriage range. 

1300 65 11 43 

www.tkv.com.au 

MELBOURNE • SYDNEY • BRISBANE • TOOWOOMBA

OPINION 

The time may be right for a new kind of labour-saving 

device on Australian farms. Image courtesy Alamy 

where’s HAL when you 

need him? 

With the cost of wages 

for skilled operators being 

one of the main outgoings 

in agriculture, it’s time 

we focused on developing 

autonomous solutions 

Trevor Whittington – CEO WAFarmers 

One would think that 

with Australia’s farm 

economics, we would 

have been at the forefront 

of the digital agricultural 

revolution. 

History tells us that crises drive revolutions. Just ask the 

Russians – they have experienced two major revolutions 

in the last 100 years: the emergence of communism and the 

collapse of communism. One led to the collectivisation of 

Russian agriculture into massive unproductive farms and the 

other to the establishment of some of the biggest privately 

owned and lowest cost farming operations in the world. 

In Australia we have our own crisis happening that should 

be driving a revolution in agriculture. We operate with the 

most expensive labour in the world, with our minimum hourly 

wage of A$19.84 set at nearly double that of the United States 

at US$7.25 (A$10.12) and 10 times that of Russia at US$1.50 

(A$2.09), so it is with some surprise that I read that it is the 

Russians who are driving the race to automate farm machinery 

with self-driving, operator-free technology. 

As every high school history and economics student is taught, 

the first agricultural revolution witnessed the introduction of 

new technology, which saw labour being replaced by capital; 

driving increased productivity and reduced costs. 

One would think that with Australia’s farm economics, we 

would have been at the forefront of the digital agricultural 

revolution, developing autonomous driving technology to 

help replace the nearly $40 an hour (with on costs) to employ 

a skilled header driver, which is over 20 times what a similar 

Russian farm worker is being paid. 

Add to that the pressures that Australian farmers are currently 

facing due to the border restrictions being imposed by state and 

federal governments around COVID-19, and one would think 

that adding another computer to the header to replace a person 

would be a pretty attractive option. 

The fact that the Russians have a working solution in the form 

of technology called the Cognitive Pilot, which is being globally 

tested in markets that are our direct competitors, should send 

a signal to our government that all their talk of government 

support for local Ag Tech start-ups is not really hitting the mark 

and driving the development of local solutions. 

One has to wonder why the Russians are not trialling their 

technology here, as I suspect there would be a willing cohort of 

farmers ready to recruit “HAL” to the coming harvest (for those 

who missed it that’s a reference to 2001: A Space Odyssey – but 

hopefully their HAL is not quite so ruthless!). 

While many farmers might be wary of putting HAL straight onto 

the header unaccompanied, I suspect the risk would be less 

than putting in a completely unskilled driver, which is what many 

farmers will be facing in the next couple of months, as their calls 

for the borders to be opened to allow in skilled workers is falling 

on political deaf ears. 

In these times I marvel at the naïveté of politicians that have 

never been in a header and who confidently proclaim that 

farmers simply need to train unskilled workers. No doubt their 

thinking is that agriculture is going to help solve the looming 

unemployment crisis, but I suspect there are greater forces 

at play. 

What the COVID-created employment crisis is doing (not to 

mention JobSeeker, JobKeeper and high minimum wages) is fast 

tracking the introduction of autonomous solutions that will be a 

key part of the next great agricultural revolution. 

With the Russians having stitched up the autonomous header 

solution, Australian Ag Tech developers should be looking at 

getting HAL into the chaser bins, as the technology is well 

established to steer the tractor and header down the paddock in 

unison, leaving the last bit of the equation the round trip to the 

field bin. 

In Western Australia, the state government recently rushed 

out an announcement of funding to support a farm machinery 

driver training scheme, but like all governments they are playing 

catch-up and have missed the big play. What they should have 

been doing is funnelling serious funds into WA Ag Tech start-ups 

to help local developers race to catch up to the Russians. 

In the meantime, we continue on employing the most expensive 

labour in the world and wait for the next great revolution in 

agriculture to address one of our biggest costs. 


EVENT NEWS 

events calendar 

Here are a list of events in 

the coming months and 

heading into next year. 

Information was current 

as of going to press 

Saputo Dairy Expo – Korumburra 

The Saputo Dairy Expo provides an opportunity for 

members of the dairying fraternity to be able to showcase 

the latest in dairy innovation and technology to local 

farmers. This year’s event will be held online so visit 

the website and experience it from the comfort of your 

own home! 

WHEN: September 7-21, 2020 

MORE INFO: www.dairyexpo.org.au/home 

World of Drones Congress – Brisbane 

The largest drone congress in the Asia Pacific region, 

the World of Drones Congress (WoDC) connects drone 

leaders, businesses and academia with the latest industry 

developments, applications and policies. The congress’ 

program boosts comprehensive sessions with keynote and 

plenary speeches from domestic and international experts 

who will share the latest developments and applications in 

the UAV industry. 

WHEN: November 12-13, 2020 

MORE INFO: www.worldofdrones.com.au 

Geelong Classic Truck & Machinery 

Show – Breakwater 

January plays host to one of the biggest and best displays 

of classic trucks, tractors, cars, machinery plus much more. 

As well as having a range of visiting clubs and displays, the 

event also showcases the Vintage Machinery Section’s own 

pavilion with more than 15 fully operational steam engines, 

12 permanently installed oil engines, a 1,000 horsepower 

marine steam engine, a wool scouring machine, and a large 

collection of steam models. 

WHEN: January 9-10, 2021 

MORE INFO: www.classictruckandmachinery.com.au 

IDW Australia – Tatura Park 

Australia’s International Dairy Week, held in Tatura Park, 

Victoria, is a forum to showcase the latest developments in 

Australian dairy cattle, farming practices, dairy 

knowledge, breeding and genetics, machinery, equipment 

and technology, environmental management and 

services. Held during the third week of January 

each year, International Dairy Week is the place 

to be for all dairy farmers, breeders, producers, 

companies, organisations and others operating 

within the dairy industry. 


MORE INFO: http://internationaldairyweek.com.au 

Eurobodalla Agricultural Show – 

Moruya 

Held at the Moruya Showground in Moruya on the south 

coast of NSW, the Eurobodalla Agricultural Show will focus 

on local produce alongside animal shows, showjumping and 

a vintage and veteran vehicle show. 


MORE INFO: https://eurobodallashow.org.au 

Berry Show – Berry 

The Berry Show is an annual agricultural show held in 

the picturesque rural town of Berry on the NSW south 

coast. The show has been promoting excellence in the 

local community for over 132 years. Attractions include 

large cattle and horse shows and fantastic entertainment 

and fireworks. 


MORE INFO: http://berryshow.org.au/about 

Seymour Alternative Farming Expo – 

Seymour 

Held in the heart of Victoria at Kings Park, Seymour. Explore 

the latest technology, practices and trends in small and 

backyard farming, visit the animals and enjoy the market 

style shopping, food and entertainment. 

WHEN: February 19-21, 2021 

MORE INFO: www.seymourexpo.com.au 

For the full year’s calendar of events: www.tradefarmmachinery.com.au/events 

2.5T - 21T AVAILABLE NOW, NATION WIDE. 

FROM YOUR LOCAL DIECI DEALER. 

1300 888 479 


Agri Plus 42.7 

Italian engineered for Australian Farms 

With a revamped interior, new suspension and new fully proportional controller, the new Agri Plus 42.7 VS 

Evo 2 telehandler offers a futuristic design, maximum visibility and maximum comfort to the operator. 

The Agri Plus42.7 VS EVO2 GD telehandler has a capacity of 4,200kg at 600mm load centre and a maximum lifting 

height of 6.9m. Using an FPT 4.5 litre engine with a peak power of 153hp and able to easily reach a top speed of 

40km/h, with 460/70 R24 traction tyres. 

Equipped with a hydrostatic single speed Vario EVO2 transmission with electronic control, and with a massive 230L 

p/m of hydraulic flow for smooth, efficient and simultaneous operations it’s easy to see why the Agri Plus 42.7 VS 

EVO2 is the ideal machine for your agricultural application. 

For more information call Dieci Australia on 1300 888 479 or visit www.dieciaustralia.com.au.

EVENT NEWS 

festival 

of trucking 

The Brisbane Truck 

Show is no longer just a 

truck show – it’s a festival 

of all things trucking! 

Above: When the industry gets 

together every two years, it’s 

not just for the truck show – it’s 

everything in and around it 

It’s not just a truck show – 

it’s a festival! 

Did you get down to South Bank when you were in town for 

last year’s Brisbane Truck Show? The music and BBQ at 

the Plough Inn were amazing. Up and down Little Stanley Street 

and throughout the precinct, there were great deals in every 

restaurant and bar, especially for Truck Show attendees. 

Or did you see the amazing display from Volvo Group Australia 

in front of the casino in Redacliff Place? ‘Mack the Transporter’, 

the Pilbara Heavy Haulage Girls’ pink trucks (looking Mickey 

Mouse even after stretching their legs across the Nullarbor), the 

Jimmy Barnes-inspired ‘Working Class Mack’ and a whole bunch 

of other new releases and favourites were all on show. 

What about the Daimler display in Queen Street Mall? How 

good was it to see school kids ooh-ing and aah-ing at the 

spectacular line-up! 

How about the Mack pop-up museum at Archerfield Airport? 

Did you see the UD on the barge on the Brisbane River with 

laser lights and fireworks? The Queensland Heritage Truck Show 

at Wacol? And, of course, the amazing display of trucks and 

trailers in South Bank showcasing the capability and values of 

the Australian heavy vehicle industry. 

There’s much more on top of this coming in 2021. It’s always 

a great time to be in Brisbane, but when the industry gets 

together every two years, it’s not just for the truck show – it’s 

everything in and around it: the events, activations, product 

launches, drive days, factory tours, the lunches and dinners, not 

to mention Australia’s favourite truck stop: the BTS Plaza Terrace 

BBQ Bar. 

It’s not just a truck show – it’s a festival! 

The Brisbane Truck Show will return to the Brisbane 

Convention & Exhibition Centre and South Bank Parklands from 

May 13 to 15, 2021. 

BOOK YOUR ACCOMMODATION 

If you’ve been to the Truck Show more than once you’ve 

probably got a favourite hotel, and a routine of how you start 

your day before heading to the show. 

One thing is for sure – there’s a lot of people looking forward 

to coming together in Brisbane when the show kicks off on May 

13, 2021. There’s a bucketload of meetings, conferences, dealer 

staff events and so on in the days preceding the show. So, the 

message is – get your accommodation sorted out as soon as 

you can. 

Returning as the official accommodation manager for the 

2021 Brisbane Truck Show is Ozaccom+. HVIA’s national 

events manager Noelene Bradley says Ozaccom+ was HVIA’s 

immediate choice to supply accommodation options for 

the 2021 Brisbane Truck Show, and have been assisting BTS 

attendees since 2009. 

“Their experience and industry buying power provides 

exhibitors and visitors to the Brisbane Truck Show with the best 

available rates over the duration of the event,” she says. 

“They take the stress out of managing your individual, group or 

block accommodation requirements.” 

You can see their discounted rates and the best rate 

of the day, live on the Ozaccom+ website. Head to the 

Brisbane Truck Show website for links to the portal: 

brisbanetruckshow.com.au/accommodation. 


INNOVATION - SUSTAINABILITY - SAFETY - KNOWLEDGE - CAREERS - COMMUNITY

EVENT NEWS 

Left: The PW628 Kanga loader 

Diesel Dirt & Turf 

deferred until 2021 

The National Diesel 

Dirt & Turf Expo at 

the Sydney Dragway, 

which was previously 

rescheduled to October 

2020, has been deferred 

until Friday, April 9 to 

Sunday, April 11, 2021 

The decision by Expo management to set a new date for 

the event was taken after a detailed review of potential 

COVID-19 public health risks. 

“These risks were assessed in conjunction with continual 

monitoring of the advice provided by the New South Wales 

government and New South Wales Health that would enable 

us to fully comply with public health orders, and to protect 

the health and well-being of our exhibitors and visitors,” Expo 

manager Marti Zivkovich says. 

Another key factor in the decision to defer was the 

complexities faced by sponsors and exhibitors for effective 

planning of marketing campaigns, logistics, and personnel 

resources. 

Also considered was the recent activity with border closures 

and strengthening of travel restrictions that have the potential to 

severely disrupt the number of interstate exhibitors and visitors 

able to attend the National Diesel Dirt & Turf Expo. 

“Our current experience in working with government 

authorities, together with our comprehensive COVID-19 safety 

plan and risk management processes, makes us well-placed to 

stage a safe and highly-successful Expo in April 2021,” 

Zivkovich says. 

“We are extremely pleased with the enthusiastic support we 

have received from exhibitors for the new venue of the Sydney 

Dragway at Eastern Creek. With 85 per cent of sites pre-sold, the 

2021 Expo is shaping up to be a great success. 

“I would like to take this opportunity to sincerely thank our 

wonderful sponsors, exhibitors, and suppliers for their support, 

patience and understanding in the time we have taken to make 

this decision.” 

The 2020 National Diesel Dirt & Turf Expo will be 

held at Sydney Dragway at Eastern Creek from Friday, 

April 9 to Sunday, April 11, 2021. If you would like 

to exhibit or visit the expo, check it out now at 

www.dieseldirtandturf.com.au. 



PRONAR Z245 

Bale Wrapper 

Get wrapped this season 

with a great deal 

Manual Control 

2 MODELS AUTOMATIC 

or MANUAL CONTROL 

• Hydraulic Loading 

• Hydraulic Wrap 

• Hydraulic Unloading 

• Wrap 

from $27,500 INC. GST 

(MANUAL MODEL) 

Professional Range Mulchers 

For quality,reliability & durability insist on a Berti Mulcher 

PASTURE PASTURE ROADSIDE 

HEAVY 

DUTY 

Hydraulic driven 

mulchers to suit 

3.5 - 30t Excavators 

Skid & Track Steer 

Loaders 

50 - 120hp 

VINEYARD/ORCHARD 

ROADSIDE/ORCHARD 

FORESTRY 

Tried & proven in Australia for over 30 Years 

Leading The Way In Vegetation 

Management Equipment 

www.agpride.com.au 

Australian Distributor 

Phone us for the name and 

number of your nearest dealer 

02 4964 8818 

Mobile 0418 923 017 

Email sales@agpride.com.au

AGRISON 

Best quality & value without compromise 

Call 1300 651 830 

www.agrison.com.au 

10 Tonne/20 Tonne 

Manure Spreaders 

Made in Europe 

Vertical Spreader 

Hydraulic Gate 

FROM $34,990 

ME850 

Mini 

Excavator 

Front Blade x3 Buckets X1 Ripper 

x1 Auger x1 Log Grabber 

ME8000 Excavator 

Yanmar Engine 

Front Blade 

x5 Buckets 

Ripper 

Steel Tracks 

Hydraulic Quick Hitch 

360°Rotation 

NOW $13,990 INC GST 


Front Blade Genuine Yanmar Diesel Engine 

x3 Buckets x1 Ripper x1 Log Grabber 

Eaton Swing Motor 

3T Forklift 

4500mm 3 stage container mast 

Side shift 1070 tynes 

Pneumatic tyres 

55hp Diesel engine 

Automatic transmission 

LED Lights 

FREE Freight to depot Australia wide 


ME1600 

1.6 Tonne 

Excavator 


10T Road 

Grader 

Nationwide Delivery. Finance Available 

ME2300 

2.3 Tonne 

Excavator 

Front Blade Mud Bucket x3 Buckets 

x1 Ripper Pilot Control Rubber Tracks 

360 Degree Rotation 



Portable Cabin 

5.95 x 2.95 x 2.70 m 

x1 Bedroom 

x1 Bathroom 

x2 Double glazed windows 

x1 Glass Sliding Door 

FROM $14,990 INC GST 

Rear Ripper 

Front Blade 

Fully Articulated 

Air Conditioned Cabin 

AGRISON 


Call 1300 651 830 

A: 2098-2108 Hume Highway, 

ISO CERTIFIED COMPANY 

Campbellfield, VIC 3061 

E: contact@agrison.com.au AgrisonTractor AgrisonTractors agrisontube 

* Conditions apply. Offers are available while stocks last. All prices GST inclusive. Freight is additional. Finance available to approved applicants. Pictures shown are for illustrative purposes only.

AGRISON 


WHEEL LOADERS 

DIESEL GENERATORS 

15 KVA 

25 KVA 

37.5 KVA 

50 KVA 

62.5 KVA 

80 KVA 

$5,990 inc GST $6,990 inc GST $7,990 inc GST $9,990 inc GST 

$10,990 inc GST $11,990 inc GST 

Calculate Your Power First: www.generatorcalculator.com.au 

100 KVA 

125 KVA 

150 KVA 

200 KVA 

250 KVA 

450 KVA 

$13,990 inc GST $14,990 inc GST $16,990 inc GST $19,990 inc GST $24,990 inc GST 

TX920L 

TX930L 

TX930LX 

$21,990 $25,990 

$28,990 

INC GST 

INC GST 

INC GST 

$55,990 inc GST 

FREE 

FREE 

FREE 

4 IN 1 

BUCKET 

4 IN 1 

BUCKET 

4 IN 1 

BUCKET 

FREE 

FORKS 

FREE 

GENERAL 

BUCKET 

TX932L 

$39,990 

INC GST 


1500 KG Lift Capacity 

ROPS/FOPS - Approved Cabin 

Powershift Transmission 


Quick Hitch 

COMES WITH 

FREE 4 IN 1 

BUCKET, GENERAL 

BUCKET, FORKS 

FREE 

FORKS 

FREE 

GENERAL 

BUCKET 






Quick Hitch 

COMES WITH 

FREE 4 IN 1 


BUCKET, FORKS 

TX936S 

$69,990 

INC GST 

FREE 

FORKS 

FREE 

GENERAL 

BUCKET 


2200 KG (SWL) Lift Capacity 




Quick Hitch 

COMES WITH 

FREE 4 IN 1 


BUCKET, FORKS 

FREE 

4 IN 1 

BUCKET 

FREE 

FORKS 

FREE 

GENERAL 

BUCKET 






Quick Hitch 

COMES WITH 

FREE 4 IN 1 


BUCKET, FORKS 

FREE 

4 IN 1 

BUCKET 

FREE 

FORKS 

FREE 

GENERAL 

BUCKET 






Quick Hitch 

COMES WITH 

FREE 4 IN 1 


BUCKET, FORKS 

AGRISON 


Call 1300 651 830 






REVIEW 

1 

second 

IMPRESSIONS 

The new four-cylinder 6 

series range from Deutz- 

Fahr fills the gap left by the 

K series of the early 2010s. 

With more farmers moving 

to higher input systems, the 

need for high horsepower in 

a nimble compact package 

is higher than ever before 

and the new 6 DT line from 

Deutz-Fahr does not fail to 

impress, says Farm Trader 

NZ’s Jackson Taylor 

Images by Jackson Taylor 

The new 6 DT series from 

Deutz-Fahr is aimed at 

large-scale farmers and 

contractors. 

was fortunate enough to grow up on a dairy farm in Taranaki 

I on New Zealand’s North Island. Our small slice of ‘Taradise’ 

has been in the family for more than 140 years, so it’s fair to say 

that it’s a family affair. 

When I was three years old, my Dad bought his first Deutz, 

an Agrotron 100, and growing up, it’s what I learnt to drive. 

I’ve many fond memories of that tractor and was sad to see 

it go. I’ve since spent time driving John Deere, Claas, Case 

IH and Fendt tractors, but there has always been something 

about Deutz-Fahr that gives me a sense of nostalgia; pretty 

uncommon at just 19 years of age. So when I was given the 

opportunity to have a flagship 6140 TTV for a couple days, you 

could say that I was pretty excited. 

The new 6 DT series from Deutz-Fahr is aimed at large-scale 

farmers and contractors and is offered in two models, the 

6130 with 126 horsepower (94kW) and the 6140 with 136hp 

(101kW). Both share the 3.8-litre four-cylinder FARMotion engine 

and can be equipped with either a 30x30 or 60x60 powershift 

transmission or Deutz’s continuously variable TTV transmission. 

Mark Fouhy reviewed the former last year, and now I’m taking 

a look at the top spec TTV model with front suspension, 50km/h, 

and a self-levelling Trima loader. 

ENGINE 

The FARMotion engine is what I found the most impressive 

part of the tractor. Deutz says it was designed specifically 

for agricultural use, with a focus on low noise and better 

performance, with lower fuel consumption and less vibration. 

As soon as I hopped in, it was easy to see that their efforts 

had paid off. The engine was quiet and smooth from idle all the 

way up to 2,200rpm. The 6140 produces 136 peak horsepower 

and 544Nm of torque, all of which were used while towing a 

7,500-litre effluent tank up and down the rolling hills of our farm. 

The unit meets Tier4i requirements using a diesel oxidation 

catalyst and a cooled exhaust gas recirculation system, 

eliminating the need for AdBlue and diesel particulate filters. 

The omission of AdBlue is great for a lot of farmers, as it means 

one less thing to worry about when filling up, and is quite handy 

when you’re under the pump trying to get things done. Deutz’s 

claims on fuel efficiency were also apparent, averaging around 

10–12 litres per hour applying effluent around the farm. You 

could quite easily expect a full day’s work between filling up 

despite the relatively small 185-litre tank. 

TRANSMISSION 

I’m a big fan of variable transmissions, especially when spending 

long days in the cab. Having the ability to just set the desired 

speed and push the pedal makes any job a breeze. Deutz’s TTV 

transmission has been around for a while now, so they’ve had 

plenty of time to get it right. 

All models can be spec’d as 50km/h units or 40km/h at lower 

rpm to save fuel. The tractor has four pre-set speeds: 5, 10, 20 

and 50km/h, which can be changed to suit the task at hand. 

These act like ranges where the tractor won’t exceed the set 

Looking for an 

Deutz-Fahr? 

Search for ‘Deutz-Fahr’ on 

TradeFarmMachinery.com.au 

or type the TA or DIY code 

shown here into the 

keyword search field 

$113,190 

TA1027995 

2020 DEUTZ-FAHR 5125.4G HD. 3.8L FARMotion 

Common Rail engine. • QLD 07 3171 1108 

$59,000 

TA967354 

DEUTZ-FAHR 5130P. 130hp, 4,622hrs, in very 

good condition. • QLD 07 3085 2724 

$60,500 

TA1042546 

2011 Deutz M620 Argotron. 3500 hrs, p/shift, 

155hp, 4 remotes • VIC 03 8373 7132 


REVIEW 

2 

3 

speed. I found the unit responsive and quick to pull back on the 

ratios when towing uphill. With a full tank weighing about 12 

tonnes, it also did well to prevent free-wheeling downhills, which 

was an issue with earlier variable transmissions. 

However, the transmission really stood out when doing loader 

work. It was great to be able to drive up to a maize pit, fill the 

bucket, then just press a button on the joystick to engage 

reverse and drive back out all without the need to change 

gears or use the clutch. All tractors in the range are fitted with 

Deutz’s Stop&Go system where the clutch is disengaged when 

the brake pedal is pushed – quite a common feature on tractors 

in the class. 

DESIGN/STYLING 

I agree with fellow Farm Trader tester Mark Fouhy’s review of 

the Deutz 6155G when he said the new range of Deutz-Fahr 

tractors are up there with the best-looking tractors on the 

market. The aggressive front end comes straight from their 

largest 6, 7, and 9 series tractors and creates a mean green 

machine. The unit also has a colour-matched Trima loader, which 

adds to the uniform green and black colourscheme. I think you’d 

struggle to find a smarter-looking package in its class. 

4 

6 

5 

7 

OPERATION 

One of the first things I noticed when stepping into the Deutz 

was that the cab was on the smaller side. I’m definitely on the 

taller side of the scale at 6 foot 5, but I was still comfortable 

once I set things up. Everything is well laid out, with many of 

the controls used on a day-to-day basis at hand on the joystick. 

This joystick controls the transmission, power shuttle, and rear 

hitch, with four other buttons that can be mapped to almost 

anything else. 

I ended up using them to control one of the rear spools 

and 4WD on/off. The joystick is hard-mounted to the seat so, 

unfortunately, you can’t adjust the reach and position of the 

controls, so my leg sometimes ended up on a weird angle when 

using the throttle. 

The rest of the controls, including power take-off (PTO), rear 

hitch adjustments, engine speed, and cruise control, were all 

close by and colour-coded to make things that little bit easier. 

The six-pillar cab had plenty of visibility and the addition of a 

sunroof was handy for loader work too. It would be nice to have 

a seamless roof design as seen in some other tractor brands, 

but it was still nice to have the sunroof. The Trima Q4s loader 

also gives good visibility and looks smart with the green selflevelling 

arms. 

1. The smart looking 6DT Deutz is an impressive package 

2. The loader package comes with Quicke’s own bucket 

3. The Quicke/Trima loader looks trick with the matching 

green arms 

4. The Deutz-Fahr logo on the axles are a nice touch 

5. The aggressive styling carries over from the bigger 6, 7, 

and 9 series machines 

6. A well-laid-out backend makes switching implements 

easy 

7. A great lighting package comes standard 

$153,450 

TA996249 

DEUTZ-FAHR AGROTRON 6155G. Powervision. 

Stoll FZ50 loader/bkt. • VIC 03 9998 4876 

$94,890 

TA792102 

DEUTZ-FAHR 5105-4G. Tier 4i diesel, 102hp 

max@2200 rpm. • VIC 03 9998 4818 

$27,500 

TA1044593 

DEUTZ AGROTRON 128. 128hp, wet clutch, runs 

and drives great. • VIC 03 8547 8644 

$98,900 

TA831444 

2017 DEUTZ DEUTZ FAHR 5120. Cab DF-S120C- 

4C. 4cyl 3620cc turbo • VIC 03 9998 4818 


REVIEW 

6 

7 

6. Quick release hoses on the loader tidies 

things up 

7. The cab has good all round visibility 

8. Plenty of room to get in and out of the 

cab 

9. The rest of the controls are easy to reach 

10. The integrated smart display is handy 

for adjusting hydraulics and speed 

11. The integrated smart display is handy 

for adjusting hydraulics and speed 

8 

9 

Specifications 

Engine Four-cylinder, turbo 

intercooled, Tier 4i 

CC rating 3849 

Power 

129hp@2,200rpm; 

136hp@2,000rpm; ondemand 

single, two- and 

four-wheel drive 

Transmission 

Continuously variable 

50km/h 

Shuttle 

Electro-hydraulic full 

powershuttle 

Hydraulics 

120L/min CCS pump, up to 

5 SCVs 

10 

11 

Suspension 

Front – fully suspended 

front axle; Cab – 

mechanical four-point cab 

suspension 

Wheelbase 

2,500mm 

Maximum 

total weight 

9,000kg 

Fuel capacity 

185L 

Linkage 

capacity 

7,000kg (Cat 3) 

Pros 

Quiet and efficient engine – no AdBlue 

Simple and versatile transmission 

Full suspension set-up makes for a comfortable 

ride 

Good visibility from the six-pillar cab 

Great looking package 

Hydraulic park brake 

Cons 

Cab is on the smaller side 

Joystick position isn’t adjustable 

Deutz-Fahr has done a 

great job at creating a 

versatile, compact fourcylinder 

machine. 

SUSPENSION/HYDRAULICS 

All Australian models are fitted with four-point cab suspension 

and 50km/h models are also fitted with front suspension. This, 

combined with the air-suspended seat, created a comfortable 

ride in all situations, despite the short wheelbase being a fourcylinder 

tractor. 

TTV models are equipped with two electronic spool valves as 

well as the four-way electronic joystick just to the right-hand 

side of the main joystick. An electronic diverter is used to switch 

between the loader operation and the other two rear spools. 

A 120-litre/min pump ensures that there’s plenty of oil going 

where it needs to. The rear linkage has a max lift capacity of 

7,000kg, which is plenty enough for most of the tasks you can 

throw at it. 

All models are fitted with an electronic park brake next to the 

seat, which feels much more premium. Another feature that 

proved handy for loader work is the rapid steer system. This 

speeds up the steering to two full turns lock-to-lock to make 

tight turns quick and easy. 

VERDICT 

Deutz-Fahr has done a great job at creating a versatile, compact 

four-cylinder machine that suits a wide range of tasks for both 

farmers and contractors. 

The comfort and ease of use that this machine offers are 

appealing and the tractors look great, too. The FARMotion 

engines are efficient and reliable and the TTV transmission 

completes what turns out is a very attractive package. 


02 4423 3499 

After Hours 0429 233 577 

sales@elgra.com.au www.elgra.com.au 

21 Central Ave, South Nowra, NSW, 2541 

HYDRAULIC PERCUSSION 

POST DRIVERS FOR TRACTOR, 

SKIDSTEER & FEL 


Cement 

Mixer 

(Paddle) 

2 Sizes available, 

Suit Skid Steer, 

Excavator, 3PL, FE 

From 

$6,290 + GST 

PDX 

Series 

5 Cell Options, 

Suit Skid Steer, 

Excavator, 

FEL or any 

wheeled 

loader. 

From 

$7,990 + GST 

89 

Series 

Driver 

Available in 2.5 

(Standard) & 3.6 

(Hi Lift) under 

the Anvil, 4 Cell 

Options From 

From 

90 

Series 

Driver 

Designed 

specifically 

for Skid Steer, 

Excavator, FEL 

or any wheeled 

loader. 4 Cell 

Options. 

From 

$15,600 + GST $13,450 + GST 

FFM-FP-5034644-TS-381 

Australia’s most POWERFUL & VERSATILE Percussion Driver 

***All El-Gra Post Drivers comply with Work Cover and other State laws.***

REVIEW 

no till 

PLENTY OF THRILL 

Despite being such an 

imposing machine, the 

Weaving GD Drill is all 

about minimising soil 

disturbance. There’s an 

impressive level of hidden 

design complexity to these 

machines, which have been 

painstakingly created to 

simplify everyday tasks, as 

Farm Trader NZ’s Jaiden 

Drought discovered when he 

spent a day with the unit 

Images by Jaiden Drought 

Creating a drilling machine with minimal soil disturbance is 

no easy task. Just ask New Zealand farmer Dave Mitchell, 

whose quest for the perfect machine has seen him spend years 

researching the possibilities. 

Having worked and extensively researched throughout the 

UK, success came when Mitchell met farmer and entrepreneur 

Tony Gent, who was involved in the disc design of the Weaving 

drill from UK family-owned business Weaving Machinery. Today, 

New Zealand is home to the only Weaving Machinery products 

distributed outside Europe, though Farms & Farm Machinery 

has confirmed the company is in talks to appoint an Australian 

distributor. 

With a decades-long focus on the min till revolution, Weaving 

Machinery has been slowly tweaking the original double disc 

design, resulting in its new patented GD coulter. It says that the 

two major benefits of this design are minimal soil disturbance 

and low draft requirements, along with having the adaptability 

to drill both cultivated and direct drill ground in a variety of soil 

types and conditions. Keeping soil disturbance to a minimum 

means microbes remain undisturbed, and with less exposed 

soil, this reduces the chance for weeds to enter the sward. 

The double disc arrangement is mounted on a 25-degree 

angle, which pivots around a central kingpin mounted within 

the coulter body. The bottom point on the disc and the pivot pin 

are in line despite most of the disc coulter hanging out the side 

(due to the disc angle). This ensures the disc runs true, with the 

added ability of being able to weave around obstacles. 

It works with the larger notched outer disc cutting an opening 

slice in the soil, while the smaller inner disc undercuts the top 

side, in effect forming an opening for the seed to be placed. The 

New Zealand spec’d drill has 150mm coulter spacing. However, 

the sideway cutting action leaves quite a wide slot for the seed. 

Germination, while looking down the rows, appears straight. 

However, looking down on the seedlings from above gives a 

glimpse of more variation, possibly closer to 125mm spacing. 

This also helps to reduce the risk of ‘hairpinning’. The angle cut 

is likened to cutting the ground with a spade on an angle, being 

easier than diving straight in the top. Lastly, the lifted soil is 

pressed onto the seed by a single tractor tread press wheel (can 

be upgraded to airless). 

PLANTING 

As mentioned, the two discs undermine the top layer, creating 

an opening for the seed to be placed, then promptly set back 

to its original state. This process eliminates any fresh soil being 

brought to the surface, leaving the top intact. This is the reason 

you can barely tell the drill has been in the paddock, and just 

as importantly, prevents giving weed seeds the opportunity of 

Looking for an 

seed drill? 

Search for ‘seed drill’ on 





$11,950 

TA785550 

2017 AGROLEAD 2500/19. Universal Seed Drill 

Coulter Type. • VIC 03 8373 7039 

$47,000 

TA868639 

AITCHISON 4124CT. Seedmatic Direct Drill. 

Seed/fertiliser boxes. • NSW 02 6171 3260 

$37,730 

TA865843 

2020 IRTEM FDD 3000. Double Disc Seed Drill 

(3.0M). 24 row, 1,080L. • VIC 02 6171 3175 


REVIEW 

1 

4 

2 

5 

3 

6 

germinating. 

Seed is delivered between the two discs of the coulter directly 

to the bottom of the soil opening. It is easy to see if the seed is 

at the bottom of the slot, as the discs are still holding the slot 

open. If a tube was blocked (which, given its position, would be 

nigh on impossible), it is simply removed with a single lynch pin 

for simple seed tube cleaning. 

Each coulter also has an exhaust in the rubber seed tube 

mounting, allowing excess air to be expelled without creating 

seed bounce, and if the tube does get blocked, the seed and 

fertiliser will still come out the top and will be broadcast rather 

than filling the tubes right up to the distribution head. 

Another unique benefit of the Weaving GD Drill is that each 

coulter has its own ground pressure ram in a closed hydraulic 

suspension system. This provides individual coulter pressure 

of up to 300kg, helping to maintain consistent sowing depth 

across undulations. 

The press wheel acts as the contour following and depth 

control for each coulter. As the coulter follows the contour of 

the ground, pressure in the hydraulic cylinder changes. Oil is 

sent around the closed system to either neighbouring rams that 

need oil (due to contour changes) or is sent to the accumulator, 

which, in turn, is sent back once the contour flattens. 

Drilling depth is adjusted by a single pin: 16–144mm is the 

drilling depth range in 16mm increments. Equally impressive is 

the overall clearance of one metre (perfect for drilling through 

cover crops), while coulter travel of 400mm means it takes even 

the toughest terrain in its stride. 

LOCAL ADAPTIONS 

The hydraulic system on each Weaving GD Drill in New Zealand 

is unique to any other drill in the world. Mitchell thought there 

was room for improvement at how the large 800/45–26.5 

flotation tyres followed the ground, particularly through large 

dips where the drill wasn’t in contact with the ground the 

entire time. 

He decided that this just wasn’t good enough for a drill of 

this price, so set about finding a solution. The result is quite 

spectacular. By taking five per cent off the flow of the fan spool, 

that oil is now directed to the rear rams. This means you can 

pressurise the rear transport wheels to take some of the drill 

weight off the coulters. 

This is perfect in wet conditions, powdery cultivated ground, 

or hill country for stability where 300kg of coulter pressure is 

not needed. 

The system still allows the drill to start metering as soon as 

the wheels are lowered at the headland like it’s intended, so the 

coulters are ‘seed ready’ when they hit the ground. 

1. The scale hanger is a nice touch 

2. The coulter pivot helps the drill navigate 

around obstacles and corners 

3. Impressive disc angle in motion 

4. A large storage box is included 

5. The ‘brains’ behind the ‘NZ spec’ 

hydraulic system 

6. Large rear oil cooler 

You can pressurise the 

rear transport wheels 

to take some of the drill 

weight off the coulters. 

$44,000 

TA1039637 

2014 MORRIS C1 CONTOUR DRILL. 47’ @ 10” 

spacings, dual shoot. • WA 08 6500 0983 

$47,500 

TA868492 

AITCHISON 4124CT. Direct drill min till 

combine w/ seed/fertiliser. • QLD 07 3073 8164 

$12,100 

TA1017744 

JOHN SHEARER PASTURE TYNE DRILL. 

Sowing on 7” spacings. • VIC 03 8547 8674 

$49,500 

TA1040358 

JOHN DEERE 1820 AIR DRILL. 60ft working 

width, 550lb C-Shank tynes. • WA 08 6500 0988 


REVIEW 

7 

7. Plenty of technology in-cab for accurate 

results 

8. Individual coulter travel in action, thanks 

to hydraulic rams working in unison 

9. The disc angle is really some out of the 

box thinking 


Controls RDS iSOCAN controls with GPS 

forward speed monitoring 

Transport 3m 

Width 

Other Two row coulter bar with a 

row spacing of 166mm; LED 

work, tank and road lights; 

tank sieve; rollover hopper 

cover; Mitas flotation tyres; 

GPS forward speed sensor; 

volumetric metering unit ; 

closed circuit hydraulic coulter 

suspension; 6 Ply 4.00–8 Kevlar 

shield pneumatic press wheel; 

ergonomic hopper access steps 

with built-in toolbox; 166mm 

Coulter row spacing; large 

capacity hydraulically driven fan 

with oil cooler; Cat III Linkage 

mounted drawbar; electric 

switching system for headland 

management 

Pros 

Individual hydraulic coulter pressure 

Low disturbance coulters reduce opportunity 

for weeds and faster grazing 

Disc angle and pivoting coulter allows it to 

contour follow exceptionally well 

Clever New Zealand-designed transport wheel 

contour following 

Large hopper with three distribution metering 

systems 

RDS variable rate control 

Half-width drilling 

Two-point linkage meaning great turning circle 

even with duals 

Up to 300kg coulter pressure 

Low draft requirements 

Cons 

Coulters need to be manually sucked in before 

transport (to take under three metres). If not on 

the road this is not necessary 

A step around the rear of the drill would make 

loading the fertiliser bin easier 

SEED HOPPER AND METERING 

The large hopper holding 5,000 litres can either be seed only 

or have a 50/50 seed/fertiliser split. A small additional seedbox 

was also incorporated in the test machine. In this case, three 

individual metering units supply different products to the coulter 

where they are mixed in the seed tube as it enters the ground. 

The seed and fertiliser are 40 per cent more capacious than the 

Accord metering system it’s based on, while the small seed unit 

uses the standard Accord system. Accord has a reputation for 

unreal accuracy combined with stainless steel components for 

longevity. The RDS Full Artemis controls is the in-cab controller 

with GPS speed reading. Each individual metering unit gives 

variable rate application on the move. 

The test machine was also equipped with an electronically 

controlled actuator, which allows half-width drilling, where 50 

per cent of the distribution head cutting off seed supply (or 

seed, fertiliser and small seeds) to half of the machine width to 

8 

9 

reduce overlap or at headlands. This, along with the hydraulic 

diverter for folding the machine, is mounted on a separate 

controller under the RDS display. 

Other features of the tank worth mentioning are the large steps 

at the front with integrated toolbox. The rollover cover is one 

piece and easy to unfold, although, like most European drills, it’s 

set up for loading with a telehandler. 

Loading ferttiliser into the back tank could be niggly, as there’s 

no real way to untie the fertiliser bag from the walkway. Easy 

inspection holes on the side of the hopper by the distribution 

heads makes for easy serviceability, as does the amount of room 

under the seed hoppers for bulk unloading and calibration. 

Fitted with a Cat III linkage mounted drawbar, this allows for 

tight headland manoeuvres even with duals. The hydraulic 

folding coulter bar maintains transport widths of under three 

metres on all models, although, this requires all coulters to be 

sucked in manually before transport. 



Hay Handling, think Muller... 

SEASON 

SALE OFFERS 

FROM $4.5K! 

ACCUMULATORS 

6 TO 15 FOOT SLASHERS 

MANUFACTURED IN AUSTRALIA 

TO AUSTRALIAN STANDARDS 

CHASER BIN 

GRABS 

07 3085 2987 

sales@mullerfab.com.au 

www.mullerfab.com.au

HARVESTERS 

grain demand 

spike likely 

An impending fall 

in European grain 

production is good news 

for wheat and canola 

growers, while barley 

might be a bit more 

complicated, according to 

Rabobank analysts 

Above: Rabobank global grains 

strategist Stefan Vogel on an earlier visit 

to Australia with Rabobank senior grains 

analyst Cheryl Kalisch Gordon 

Wheat export volumes from European Union member 

nations are expected to fall by at least 10 million metric 

tonnes this year, with Australian crops likely to make up the 

shortfall. 

Rabobank’s London-based global grains and oilseeds strategist 

Stefan Vogel says grain traders are banking on Australian 

production to enter European export markets, even despite an 

expected boost in Russian wheat production. 

“No one else has a whole lot of buffer to make that up,” 

he says. 

“So if we want to keep stable or even growing global export 

volumes, Australia is actually required to give us a decent 

amount of wheat on to the world export market.” 

Similarly, this year is expected to be the poorest European 

canola harvest since 2006, which Vogel says could see Europe 

double its volume of canola imports from Australia. 

“COVID-19 has clearly hit the prices of canola in Europe, 

although they are in the meantime still holding above the last 

few years given improved demand and the extremely poor 

European crop,” he adds. 

While demand for biofuels, malt, beer and clothing had fallen 

due to the COVID-19 pandemic, Rabobank predicts demand for 

all these products will be at 85–95 per cent of normal levels by 

this time next year. 

However, the impacts may be felt more heavily in the feed 

grain sector in the coming months, as the economic downturn 

triggered by the coronavirus resulted in reduced meat 

consumption in developing countries. 

“We are actually thinking this could get worse in some 

countries where reduced incomes may see consumers not 

being able to afford as much meat as they normally consume,” 

Vogel says. 

“We have to consider if there will be a reduction in meat 

demand and therefore a reduction in livestock feed demand,” 

he said. 

That said, Rabobank Australian senior grains and oilseeds 

analyst Cheryl Kalisch Gordon says there is an animal protein 

deficit globally – meaning that supplying feeding stock will not 

necessarily be a bad outcome for barley growers. 

“Moving our barley is going to be tricky. The capacity for the 

barley price to find strength is really going to depend on how 

farmers hold barley for that feed grain complex in Australia,” 

she says. 

More broadly, the year will be positive for Australian grain 

growers, she says, with total wheat production forecast to be 25 

million tonnes for 2020–21 and prices above the 10-year average 

– albeit lower than the five-year average. 

In addition, she said, growers, particularly those in the eastern 

states, had a greater – and increasing – capacity for grain 

storage than in the past, and therefore more capability to avoid 

harvest sales. 

Left: ANZ agriculture research director 

Michael Whitehead 

get set for 

harvest 

challenges 

Australia’s total wheat 

harvest is expected to rise 

by 71 per cent in 2020–21, 

but one analyst is concerned 

our infrastructure isn’t ready 

to cope 

Australia’s grain industry has some work to do in order to 

handle what ANZ Bank expects to be one of its biggest ever 

crops, the latest ANZ grains report says. 

ANZ agriculture research director Michael Whitehead says 

the bank’s outlook for the national wheat crop this year 

remains at 26 million tonnes, despite a number of grain regions 

experiencing a dryer-than-expected June. 

“After last year’s drought-hit low of 15.2 million tonnes, this 

would be an increase of 71 per cent,” he says. 

“In addition, on some current estimates, wheat exports are 

currently forecast to jump by around 90 per cent to 17.5 million 

tonnes.” 

Were that to happen, the forecast increase production and 

exports would be among the largest year-on-year rises in over 

50 years. 

“For grain traders and receival site operators, the build up to 

this year’s harvest will similarly need to focus on ensuring that 

logistical capabilities and storage capacity are prepared for the 

scale of crop which could eventuate,” the report says. 

“In the record wheat crop of 2016/17, some industry 

stakeholders were caught unprepared by the scale of the crop, 

leading to some logistical challenges along the supply chain. 

“In comparison, the forecast year-on-year crop increase in 

2020/21 will be greater than that year, in both volume and 

percentage increase.” 

The report says it is vital that transport, storage and export 

processes run as efficiently as possible in order to handle this, 

ensuring potential issues such as port and shipping access or 

COVID-19 challenges be planned for in advance. 

“While the COVID-19 situation in Australia later this year is 

difficult to predict, it would be wise to factor in any implications 

from possible continuing restrictions on cross-border 

movements between states,” Whitehead says. 

The report also says that in the face of substantially higher 

production, growers will need to evaluate how much can be 

stored on farms, rather than being sent to grain receival sites, 

and whether their storage facilities are adequate. 

Whitehead says grain growers will need to ensure that their 

own infrastructure, including silos, coverings and grain bags, are 

in good supply. 

“Growers, contractors and traders will also be looking ensure 

adequate availability of harvesting and transport machinery, 

including headers, trucks, and train capacity,” he says. 

Despite global challenges, the ANZ report says there is a 

positive outlook for Australian grain to supply the fundamental 

bread and noodle needs of markets across Asia, amid a boost to 

grain from the free trade agreement with Indonesia. 

The impact of China’s tariff hikes on Australian barley imports 

has not yet been felt, ANZ adds, noting that while Canadian 

farmers have picked up some of Australia’s market share, 

exporters are treading with caution, noting that Chinese 

restrictions on Canadian canola exports have provided 

opportunities for Australian producers. 



14 Joyce Ave, Moree NSW Ph: (02) 6752 2277 Michael Watt 0428 657 053 

40 Boundary Rd, Goondiwindi QLD Ph: (07) 4677 8100 Michael Watt 0428 657 053 

318 Taylor St, Wilsonton. Toowoomba QLD Ph: (07) 4634 3911 

www.blacktrucksales.com.au 

NEW HOLLAND CR9.90 

2016, 

- 1207 Engine Hours, 961 Rotor 

Hours 

- 12.9L Iveco Engine, 530hp, 

- 1300L Fuel Tank, 14500L Grain 

Tank 

- Folding Unload Auger with 

extension , 4 speed hydrostatic 

transmission 

- Intellisteer Guidance with 

Intelliview 4 screen and 372 receiver 

unlocked to RTK (no radio) 

- Straw Chopper, DFR 

- Reverse Camera and Tank Camera 

- 900/70R32 Front Tyres, 750/65R26 

Rear Tyres 80% 

- 40ft Mac Don Front - One owner, 

Excellent Condition 

- Located in Goondiwindi 

- Please call Dom 0400582092 

706626. TA992274. 

$480,000 

E Z TECH 30 TONNE 

Capacity -30 tonne, Rollover tarp, 18 inch 

discharge auger, 14 ft long discharge auger, 

1000 pto, 30.5R32 Tyres. LOCATED 

TOOWOOMBA. eztech30. TA988728. 

$79,900 

NEW HOLLAND CR9070 

2010 model, 1800 Engine Hours, 1250 Rotor Hours, 10.9L Iveco 

Engine, 1000L Fuel Tank, 12333L Grain Tank, Auger Extension, 4 

speed hydrostatic transmission, Auto Steer ready with Intelliview 

monitor, Straw chopper, Automatic Stone Protection, Cameras, 

900/60R32 Front Tyres, 600/65R28 Front Tyres 60%, 42 foot 

Honey Bee Front, Been through the workshop with a massive list 

of work been completed including shoe, sieves, chains, belts, 

service and much more. Located in Goondiwindi, Call 

0746778100. 700078. TA870433. 

$250,000 

JOHN DEERE CTS 

1997 Model, John Deere CTS Combine, Good condition, 

always kept undercover. 4885 engine hours, 3090 

seperator hours. John deer 930 30ft tin front & comb 

trailer. Located Dalby, Call Michael 0428 100 164. 

706928. TA1043046. 

$33,000 

GLEANER R65 

2009, AGCO 8.4L Engine, 1839 Hours, 570L Fuel Tank, 

10570L Grain Tank, 4 speed Hydrostatic Transmission, 

AGCO Global Technologies display and task manager, 

Straw Chopper, moister and yield meter, 30.5-32 Front 

tyres 40%, 16.9-24 Rear tyres 25% 

Located in Goondiwindi, Call Dom 0400 582 092 or 

4677 8100. R65HR62174. TA977701. 

$88,000 

NEW HOLLAND 840CD 

NEW 45 ft New Holland draper front. 

Suit all CR series Combines. 

500132. TA1021518. 

$80,000 


2011, - 42ft Honey Bee Front, 

12.9L FPT Engine, 523hp, 

- Straw Chopper, Intelliview 4 

screen, Guidance Ready 

- Twin Rotor, 4 speed 

hydrostatic Transmission 

- 1709 Rotor Hours, 2479 

Engine Hours 

- In Excellent Condition 

- Located in Goondiwindi, Call 

0400 582 092. 706627. TA1021519. 

$258,500 

You can depend on Black Truck & Ag for a good deal, a suitable finance package and service support. 

FFM-FP-5011765-B 

2.99% on all used combines, Terms & Conditions apply. Subject to credit approval. Finance provided by CNH Industrial Capital Australia Pty Ltd AFS License No.286664.

HARVESTERS 

steady results 

With 10 dealerships across 

three states, O’Connors 

says the automated systems 

offered by Case IH are 

helping to push harvester 

performance to new highs 

across the country 

Above: The AFS Harvest Command system 

helps ensure consistency across harvest, no 

matter who is behind the wheel 

AFS Harvest Command 

is designed to improve 

grain quality and grain 

savings through sensing 

and optimising machine 

settings. 

Broadacre growers looking to maximise their yields now 

have access to the latest in combine harvesting technology 

and productivity in Case IH’s AFS Harvest Command, a flagship 

product of the brand’s Advanced Farming Systems (AFS) suite. 

Case IH dealer O’Connors’ group sales development manager 

Tom Sheridan says combine automation is one of the most 

exciting and rapidly evolving sectors of precision farming 

technology, with broad-reaching benefits for individual 

operations. 

The new AFS product, introduced to Australia as part of the 

Axial-Flow 250 Series combine launch at the 2019 Wimmera 

Machinery Field Days, has earnt the praise of local growers and 

set new benchmarks for efficiency and performance across 

corn, wheat, barley and canola crops. 

For Sheridan, automation isn’t about replacing skilled 

operators, but rather about focusing on consistency, while 

enjoying greater workforce flexibility. 

“AFS Harvest Command is designed to improve grain 

quality and grain savings through sensing and optimising 

machine settings, and with this level of automation even less 

experienced operators can achieve a similar level of productivity 

and performance to their more experienced counterparts,” 

he says. 

This new combine automation allows for settings such as 

rotor speed, rotor cage vane angle, cleaning fan speed, and 

sieve positions to be continuously monitored and adjusted as 

conditions change – without driver intervention. 

In fact, the AFS Harvest Command automation on the 

250 Series uses 16 sensors to control a total of seven 

combine functions. 

“AFS Harvest Command automatically adjusts itself based 

upon feedback from sensors and targets the maximum ground 

speed and engine load as set by the operator,” Sheridan says. 

“The additional advantage is there is no time required 

to establish a baseline as can be required on competitor 

machines. The results seen in the field and the feedback from 

our customers reinforces to us that this is the most impressive 

combine automation product on the market.” 

As Case IH’s largest dealer network in Australia, O’Connors’ 

focus on staff training ensures they’re well positioned to ensure 

customers maximise the potential of the technology. 

“We believe it’s vital – for us and our customers – that 

our product specialist, sales and service teams know the 

machines inside and out and can provide the most up-to-date 

information,” Sheridan says. 

“And with ten branches across NSW, Victoria and South 

Australia we have a large bank of knowledge available when it 

comes to problem solving.” 

AFS Harvest Command, as its top level of automation, monitors 

everything from ground speed and engine load all the way up 

to feedrate control and sieve settings, which are based on the 

feedback received from the loss sensors, a grain camera and 

sieve pressure sensors. 

These sieve pressure sensors are vital for ensuring the 

optimum performance of the combine. The sensors provide for 

the relay of data concerning the load on the sieve, which in turn 

allows the system to determine the difference between sieve 

overload and blow-out losses. 

A grain camera monitors grain quality, including cracked and 

broken kernels – as well as foreign material, allowing for the 

adjustment of settings as required. 

“What this technology can do is something we’ve never seen 

before, and what Case IH is currently developing and refining 

will ensure AFS Harvest Command remains a market leader, 

continuing to revolutionise the harvesting sector and redefining 

just what’s possible,” Sheridan says. 

For more information contact your nearest O’Connors 

branch or visit www.oconnorscaseih.com.au 



HARVESTERS 

ahead of the curve 

Two new drapers, a belt 

pickup and two new corn 

heads will be available 

for Australian John Deere 

owners as the giant 

launches its new lineup 

Above: The HDR maximises combine 

performance through greater grain 

capture across various crops, changing 

conditions and uneven or rolling terrain 

Easy to use, these drapers 

pick up and sweep the 

down or lodged crop 

across the cutterbar to 

recover more crop. 

John Deere is now taking orders for an entirely updated 

header lineup, ready for harvest 2021, after launching its new 

range recently. 

Comprising the new HDR rigid cutterbar drapers, RDF 

HydraFlex drapers, a BP15 belt pickup, and CR and CF corn 

heads, each is compatible with most of Deere’s S series and 

T series combine harvesters, as well as the larger models in its 

X series. 

John Deere tactical segment manager Marko Koelln says the 

new headers will be available alongside the company’s 700D 

draper series, which he says has long been “a mainstay of the 

Australian farming industry’s harvest equipment lineup”. 

HDR RIGID CUTTERBAR DRAPERS 

Koelln says the HDR rigid cutterbar drapers boast a new hinged 

frame, which gives them a wide wing range and what he says is 

unmatched terrain-following ability. 

“Easy to use, these drapers pick up and sweep the down or 

lodged crop across the cutterbar to recover more crop thanks 

to a consistent distance between the reel fingers and cutterbar, 

improved reel range and increased reel-drive motor torque,” 

he says. 

“Optional John Deere grain saver draper belts can also help 

to reduce canola cutterbar loss by up to 25 per cent when 

compared to traditional, smooth draper belts.” 

Available in cutting widths of 10.7m, 12.2m, 13.7m and 15.2m, 

the drapers are designed to help bring more crop into your 

combine with each pass – working most effectively for canola, 

pulse and small grain growers. 

Deere says the drapers can also help minimise grain loss when 

operating under a wide range of crops and conditions – while 

capturing more grain, especially for down or lodged crops. 

“By upgrading from our 13.7m draper to the new, larger 15.2m 

version, farmers are able to cover around 10 per cent more 

ground each day, for improved time and input cost efficiencies,” 

Koelln says. 

RDF HYDRAFLEX DRAPERS 

Compatible with harvesters dating back to 2012, the new John 

Deere RDF HydraFlex Drapers are built on the back of the 

existing John Deere 700FD, while providing new features to 

reduce grain loss. 

All RDF HydraFlex drapers feature a new two-speed centre 

feed section that lets operators slow down the feed drum and 

centre feed belt by 20 per cent compared with the 700FD. 

“This puts more grain in the tank by reducing free grain loss, 

while operators can easily go from low to high speed when 

direct heading canola,” Koelln says. 

“RDF HydraFlex drapers reduce grain loss and let operators 

harvest at faster speeds without sacrificing cut quality.” 

The drapers carry over the John Deere 10cm double-cut, dualdrive 

shaft HydraFlex cutterbar, which can make 1,980 cuts per 

minute to enable faster harvesting speeds. 

Deere will also provide two centre feed belt options – a 

standard centre belt recommended for soybeans or an optional 

cleated centre belt to deliver higher-volume crops, like canola, 

into the feed drum. 

BP15 BELT PICKUP 

John Deere’s new BP15 belt pickup platform is designed to 

handle high volumes of crops in tough conditions – aimed at 

small grain and canola growers who need to harvest more 

hectares per hour with an X Series, S Series or T Series. 

Koelln says the new pickup delivers a 20 per cent faster feed 

rate than its predecessor, the John Deere 615P, thanks in part to 

a two-speed auger drive sprocket which helps improve feed rate 

adjustability, for large or bulky crops like canola. 

“The BP15 has a wider feederhouse opening with adjustable 

feed auger flighting and fingers that allow this belt-pickup 

platform to harvest more hectares,” he says. 

A slower speed feed rate can be used for less bulky crops like 

cereals and grass seed, while a factory-installed crop shield 

minimises grain loss by preventing it from building up and laying 

on the feederhouse. 

“Less time will be spent making adjustments as no tools are 

needed to modify the height of the large, 51cm gauge wheels for 

varying window conditions and crop types,” Koelln says. 

CORN HEADS 

Deere has also developed a new range of two types of corn 

heads. Designed for harvesting leaning, down or fallen crop, 

the CR rigid corn heads can be equipped from the factory with 

active end fenders that pull more ears into the head as the 

harvester moves through the paddock. 

The John Deere CF folding corn heads include all the features 

of CR rigid corn heads but offer a low-profile folding frame and 

an industry-leading fold cycle time of less than 60 seconds when 

connected to S700 combine harvesters, Deere says. 

They also cut down costs by eliminating the need to purchase 

a header trailer. 

Each of the new drapers, corn heads and the belt pickup come 

with a header control unit (HCU) that communicates seamlessly 

with the combine. 

The HCU saves head-specific factory calibration settings and 

collects and sends header-width information to the combine for 

accurate yield mapping, and detects and reports header-specific 

diagnostic codes, plus tracks hours of use and maintenance 

intervals. 



HARVESTERS 

record yield 

The world record holder for 

the highest average wheat 

yield puts his success 

down to clever practices 

and smart machines 

Above: Eric Watson with his Case IH 

Axial-Flow 250 Series combine used in 

the record-breaking yield, and at the 

controls of the combine 

2020 has been a defining year so far – and there’s no 

exception in the world of wheat growing, with New Zealand 

farmer Eric Watson breaking his own Guinness World Record in 

February. 

Based in Wakanui, in Canterbury in New Zealand’s South Island, 

Watson achieved the world’s highest average wheat yield, of 

17.398 tonnes per hectare, harvested from 8.6353 ha at Paddock 

15a on his farm. 

Working with his wife Maxine, he set the previous record of 

16.791 tonnes with feed wheat in 2017 on the same paddock. 

Irrigated wheat yields in New Zealand average about 12 tonnes 

per hectare. 

Watson says part of the reason for his success was a series 

of productivity gains across multiple facets of his business, 

particularly through using tractor and combine harvest 

technology. 

He harvested the crop using a Case IH Axial-Flow 250 Series 

combine harvester, complete with the Case IH AFS Harvest 

Command software system, which uses sensors and optimised 

harvester settings to conserve grain and improve its quality. 

Sensors monitor air pressure on the sieves, warning 

of impending losses and allowing the combine to make 

adjustments before any grain is lost. 

“That new automation; it’s quicker than the human,” he says. 

“We always think we can beat computers, but you can’t beat 

that. The Harvest Command system knows what to do before 

you even see it on the screen.” 

Like many arable farmers, Watson says he uses tracked 

equipment to maintain soil quality. 

“I’ve stuck with tracks for years and I wouldn’t go away from 

them for cultivation because you get less compaction and you 

also get less slip,” he says. 

“With the Case IH Quadtrac you might run at 1 per cent but 

most of the time you’re running at zero. If you’re running a 

wheeled tractor at 10 per cent, if you’ve run 10 hours then 

you’ve lost an hour. And you’re also damaging soil structure by 

smearing it a bit.” 

Plus, Watson says: “If you’re using 80 litres of fuel an hour 

and you have to cultivate for an extra hour, well, that’s a lot of 

money.” 

This, plus other features including the Axial Flow mechanism 

in the harvester that reduces grain damage, goes a long way to 

ensuring impressive yields. 

Watson says he approached the 2020 Guinness record attempt 

in much the same fashion as his successful 2017 bid, albeit 

with a few key changes – born from working with Bayer’s New 

Zealand Crop Science team. 

To break the record, Watson switched wheat variety to feed 

grain Kerrin, bred by KWS, and used herbicides and fungicides 

from Bayer, as well as taking their agronomy advice. 

He also moved from solid urea to liquid, in order to improve 

spreading. 

“That played a big part as well, especially to get that extra 

600kg a hectare,” he says. 

“When you’re getting up to those high yield figures it’s hard to 

get a big figure like that.” 

Left: The CropScan sample head is 

mounted onto the clean grain elevator 

on a Case IH combine harvester 

cropscan 

secures 

supply deal 

Australian-made grain 

analyser provided direct from 

Case IH and New Holland 

dealers to customers under 

a new supply deal. Andrew 

Hobbs reports 

Australia’s Next Instruments will be able to supply its 

CropScan 3300H on-combine grain analyser direct to Case 

IH and New Holland customers after signing a supply deal with 

CNH Industrial. 

Under the new arrangement, dealers can arrange for Next to 

supply its CropScan 3300H to customers directly from its Sydney 

Factory. 

Case and New Holland dealers will also be able to access Next 

Instruments’ sales, technical and service support team directly, 

which Next says will ensure faster and better support for dealers 

and their customers. 

The deal follows an initial supply arrangement signed in 2016 

for the previous model, the 3000H, where Next supplied the 

analyser directly to CNHi for the company to install. 

Awarded Ag Innovation of the Year at the 2015 Wimmera Field 

Days, the system measures protein and moisture in wheat and 

barley; and oil, protein and moisture in canola. 

Next Instruments chief executive Phil Clancy says early signs 

from dealers are promising, and the company has built up 

inventory stocks in anticipation of higher demand. 

Launched for harvest last year, the new CropScan 3300H has 

a number of added features, including a new sample head that 

increases the grain flow rate and reduces scan time to 5–10 

seconds per measurement. 

The other improvements are a lighter tablet PC controller, 

better weigh scale communications and a cloud account and 

portal for the uploading of data mapped by the analyser. 

Retrofittable and used on all major harvester brands, the 

analyser affixes to a harvester’s clean grain elevator, taking 

samples and analysing them every time the sampling head 

is full. 

“That then gets presented to the grower on the screen and it 

gives him a moving average, then he can choose a number of 

different displays to have a real time field map,” Clancy says. 

Next Instruments is also working on new ways to help farmers 

use the data, through a new entity called CropScan Ag Solutions. 

“It is quite complex to use the software to develop all the field 

maps, so in some cases it has not gone any further,” he says. 

“So we are developing a system where we take the data, put 

it into the cloud, convert it to field maps and then post that 

directly to the farmer and their agronomist.” 



J.B.Scott Pty Ltd 

(03) 5277 9366 

Andrew 0418 599125 

jbscott.com.au | sales@jbscott.com.au 

Victoria Street, North Geelong VIC 

JOHN DEERE 6920 

Serial L06920P376523 

150hp, IVT transmission 

Front axle and cabin suspension. 

21314.. TA1046337. 

$60,500 incl GST 


John Deere 5520 tractor and John Deere 541 loader 

S/N 21347 Serial LV5520K359017 

2003 model 87 engine hp 

Power reverse transmission 

6000hrs approx. 

21347.. TA1046326. 



Serial RW7600H005939 

1994 model 130hp 

4900 hours 

Dual wheels 

Power quad transmission. 

21380. TA1046322. 


JOHN DEERE 6430 PREMIUM 

Serial L06430K612203 

2009 model, 115hp 

5100 hours 

Front axle and cabin suspension 

Auto quad transmission. 

21336.. TA1046321. 


JOHN DEERE S670 

Serial 1H0S670SAE0766631 

2014 model, 1224 sep hours 

3 speed electric transmission 

Chopper 

900/60R32 singles. 

21234.. TA1046318. 

$275,000 incl GST 

JOHN DEERE 9770 STS 

Serial H09770S731166 

1900 sep hours, 2009 model 

Wide spread tail board and chopper 

800/70R38. 

21235.. TA1046328. 

$181,500 incl GST 

JOHN DEERE S670 

Serial 1H0S670SCC0746818 

2012 model, 1634 sep hours 

Pro drive transmission 

Power cast tail board and chopper 

Duals. 

21233.. TA1046319. 

$269,500 incl GST 


Serial H0970S732039 

2581 sep hours 

Chopper 

800/70R38. 

21166.. TA1046335. 

$143,000 incl GST 


Serial 1H09970SPB0744127 


Wide spread and chopper 

Pro drive transmission 

900/60R32. 

21238.. TA1046333. 

$159,500 incl GST 


Serial H09770S0728168 


Wide spread and chopper 

800/70R38 new tyres. 

21231.. TA1046334. 

$198,000 incl GST 


Serial 1E00469STDD390299 

27000 bales. 

21357. TA1046338. 


FFM-FP-5012323-A-UN

HARVESTERS 

best of both worlds 

Released to the European 

market in July, New 

Holland’s new CH 

Crossover Harvesting 

collection of mid-range 

combines sets new 

standards of capacity and 

versatility, it says 

Above: CH7.70 combine harvester has 

segment-leading throughput 

It offers the best of both 

worlds – New Holland’s 

best twin rotor and 

conventional technologies 

– to deliver segmentleading 

throughput. 

New Holland says the new separation technology in its 

CH7.70 combine harvester will help it deliver 25 per cent 

more throughput than a conventional combine in the same 

segment. 

Lionel Gleyroux, New Holland’s combines and headers 

marketing manager for Europe, says the new combine sits 

between the company’s mid-range conventional and flagship 

rotary models. 

“The new Crossover Harvesting concept takes the best of our 

harvesting expertise to create the opportunity for every farmer 

and contractor to be more productive, versatile and effective,” 

he says. 

“It offers the best of both worlds – New Holland’s best twin 

rotor and conventional technologies – to deliver segmentleading 

throughput.” 

The harvester’s conventional two-drum threshing system 

features a reinforced 600mm diameter drum with a sectional 

concave – which can move away from the drum in less than 

20 minutes to provide a gentler rubbing action for different 

crop conditions. 

New Holland says this works well with its 53cm, 3.45m twin 

rotor system, which it says has the largest separation area 

in the industry. The system requires minimal changes to the 

settings when switching between crops, resulting in outstanding 

crop-to-crop versatility. 

The CH7.70 can also be equipped with a range of header of up 

to 9.15m, including the new 8.53m Varifeed version, which New 

Holland says was specifically developed for this range. 

The new harvester, released in Europe last month but with 

no plans for an Australian release, also has an extra cascade 

in the centre of the grain pan and a double flight cross auger 

– boosting cleaning capacity and driving grain to the elevator 

faster. 

New Holland’s global head of crop harvesting product 

management Lars Skjoldager Sørensen says the combine is 

designed for arable farmers looking for strong performance and 

low ownership costs. 

“The new CH7.70 combine brings to our customers all 

the benefits of 45 years of twin rotor separation excellence 

combined with our best threshing technology – best-in-class 

productivity, top grain and straw quality, crop-to-crop versatility 

and reliability with low operating costs,” he says. 

Its SmartSieve system maintains sieve balance for uniform 

cleaning, even on side slopes of up to 25 per cent, calibrating 

sieve action based on fan speed and kernel size. 

At the same time, its Opti-Fan system compensated for 

fluctuating grain speeds across the cleaning shoe, reducing fan 

speed when travelling uphill so no grain is lost out the back of 

the combine. 

The optional Laterale system uses an automatic levelling 

system to provide transversal slope correction of up to 18 per 

cent on both sides. 

Featuring the 374 horsepower Cursor 9 engine, the CH7.70 

has been designed with easy maintenance in mind, with a large 

service door and only four greasing points. 

It comes with a standard three-year extended warranty (1,200 

engine hours) covering the engine, driveline and after-treatment 

system, together with 600-hour service intervals. 



Hado Pty Ltd ATF Intersales Unit Trust 

ABN 64 160 069 925 / ACN 001373 726 

80 Hoskins St, PO Box 178, Temora NSW 2666 

Ph: 02 6977 1933 

270-272 Hammond Ave, Wagga Wagga NSW 2650 

Ph: 02 6951 5515 

8-14 Oakes Road, Griffith NSW 2680 

Ph: 02 6962 6831 

www.intersales.com.au - admin.temora@intersales.com.au 

CASE IH MAGNUM 340 2018, ultimate spec magnum, 

Approx. 850 hrs, new 480/80r50 rear duals , new 

480/79r34 front tyres, linkage and quick hitch , 540/1000 

pto, 4 remotes, 50 kmh 19 speed transmission, cab and 

front axle suspension. Pro 700, nav, 372 receiver, auto 

steer, factory red care warranty till June 2021. TA1037182. 

$308,000 

AGRI-SPREAD AS150-T ISO, Weight cells 2017, 

hydraulic drive spreader, steering rear axle, hydraulic 

brakes, Apollo isobus (no monitor), load cells, fertiliser 

and lime discs, sprung drawbar, VRT ready, roll top tarp, 

calibration and test kit, work lights, beacon, led tail 

lights, plastic mud guards. TA1042961. $115,500 

FLEXI COIL PD5700/3850 PD5700/3850 2012, Parallellogram 

Precision Hoe Drill 60' (18.3mt) Width in 5 sections 12" spacings on 

3 ranks, 5.6mt transport width 60 row units - Double shoot opener, 

Smooth profile packing wheel, individual depth control and fully 

adjustable breakout (275-55lb) from the cab seat Seeder is matched 

up with a Flexicoil 3850 tow behind Air Cart 3 bin 380bu Capacity 

(13,400lt) Split in litres 4,150/3,300/5950 Flexcontrol IV 254mm (10") 

Load/unload auger. TA1029421. $220,000 

CASE IH 4430 Aim Pro 2016, 6000l 36.5 MT, approx.1600 

eng hrs.700 spray hrs, 480/80r42 tyres and guards 50%, 

auto fold and height control, RTX 372 receiver, Nav, Pro 

700 auto steer, 5 height sensors, auto grease, rev 

camera, Chemical inductor, Chem Vac, O/S sign, boom 

recirculation and flush system fitted, electronic tank 

gauge, $451000 inc gst. TA1034777. $451,000 

MILLER NITRO 4365 with macdon adaptor 2011, sprayer, Approx. 

3500hrs, 520/85r38 tyres 80%, 6000l tank, 30mt boom, mudguards, 

3 sensor raven auto height control, triplet nozzles 25cm, 7 section, 

auto grease, 50kmh, hydro transmission, Led under boom lights, 

8.7lt Cummins eng, 365HP, case XCN 2050 controller, nav 11, auto 

section control with field IQ section control, adaptor for MacDon 

draper. TA1036994. $231,000 

CASE IH 2015 canola front 2002, canola p/u, front and 

trailer, good order, new fingers to be fitted to front belt 

and serviced. TA1040414. $18,700 

CASE IH 2010 25 foot 1010 2005, front and trailer. 

Double knife drive, 6 bar reel with steel fingers, table 

auger with retractable fingers and stainless flighting. 

Vibra matt fitted. Good condition. TA1041988. $27,500 

NEW AND USED The silos come in many different sizes 

starting at 16m3 perfect for seed silos or the hobby 

farmer wanting to feed a small number of livestock, and 

up to 137m3 for serious grain storage. TA1011908. POA 

HARDI COMMANDER S 5033 1999, 5000lt tank, 4 section 

33mt force boom, triple nozzles, electro hydraulic 

Lift/Tilt/Fold, pilot controller, boom wheels, inline suction 

filters, quick mix chemical hopper, hydraulic drive 463 

pump, remote fill with filter, stainless steel boom lines, 

axel suspension, 23.1 x 30 tyres with guards, Very 

straight for age. TA1000648. $33,000 

HARDI 7036 COMMANDER 2006, 7036, 2006, 7000lt, 

36mt Force Boom, 464 Hyd drive pump, 3 fill, Chem 

Hopper, Micromatic flush kit, Airbag boom wheels, 

Triplet nozzles, Oversize sign, Mudguards, 20.8x42 tyres, 

8 section, HC5500 controller, end nozzles, elect tank 

gauge. TA1043054. $55,000 

HARDI 5030 COMMANDER 2011, 5000l , 30mt SPC boom, 

hydraulic axle suspension, 18.4 x 38 tyres, Granni pot 

and Vac, electric end nozzles, electronic tank gauge, 6 

section HC 5500 control, jobcom, inline filters, fill filter, 

end fence protectors NEW 363 PTO drive pump. Serviced 

as needed. TA357842. $35,200 

FLEXI COIL 1720 H/G small seeds tow behind trike bin, 

P/J green small seeds 2 seasons, mechanical drive with 

in cab monitor, up dated no longer required, 0 428,351 

744 consign. TA1046449. $29,700 

CASE IH 9240 45ft 3152 / trailer 2016, draper front, 2112 eng, 1688 

rot hrs, new eng less then 20hrs,620/70R42 duels 600/70r28 steer 

80%, chopper, rock trap, grain tank camera, Nav, 372 RTX, pro 700 

auto steer, hard faced augers, rotor cover plates, folding grain tank 

extensions, radio, UHF, HID lights, folding unloader auger, stump 

jump 4 axle trailer, top cross auger, serviced. TA1044109. $429,000 

INTERSALES 2018 3 and 4 axle header trailers.Combine 

windrower or dual purpose, rubber torsion axles, guards, 

lights, flashing light, 2 storage grates, ball race turntable, 

40mm ring feeder. TA458044. 

POA 

BOGBALLE M2 PLUS 2018, 3300L BOGBALLE linage 

spreader, 9T vanes will do 36 mt urea, PTO drive, 

hydraulic door actuators, flip over cover tarp, extendable 

ladder, road lights, mudguards, sieves, easy calibration. 

TA900361. $24,200 

18.4 x 42/ 480/80R42 CLIP ON DUALS to suit 32" rim, 

matches up to 900/65r32 header tyres, 12 x rods and 

eyes supplied Case , John Deere, new Holland etc. 

TA922636. $9,900 

FFM-FP--5011483-D

THE EVOLUTION 

OF THE LEADER 

CASE IH AUSTOFT 8010 & 8810 

SERIES CANE HARVESTERS 

EASIER OPERATION 

IMPROVED HARVEST QUALITY 

INCREASED PRODUCTIVITY 

...and now REAL TIME YIELD MONITORING 

TAKE THE NEXT STEP IN PRECISION FARMING - CASE IH YIELD MONITORS 

The new Case IH Austoft 8010 and 8810 cane harvesters, in addition to their already impressive 

list of extras, now offer real time YIELF DATA with the AFS Pro 700 Monitor. This technology can be 

retro-fitted to the earlier A8000 and A8800 harvesters with the same monitor. 

Monitor yield and tonnage on the go | Post process data via the Pro 700 monitor or desktop | Better 

manage application of fertilisers | Compatible with NTRIP/CORS networks (no base station required). 

McDONALD MURPHY MACHINERY MACKAY (07) 4940 7300 | BUNDABERG (07) 4153 6933 | www.mcdonaldmurphy.com.au 

QMAC MACHINERY INNISFAIL (07) 4061 2033 | www.qmac.com.au 

AGNORTH AYR (07) 47833000 | www.agnorth.com.au


QMAC MACHINERY 

www.qmac.com.au 

Cairns: 07 4044 4440 Tully: 07 4068 1311 

Tolga: 07 4095 4132 Innisfail: 07 4061 2033 

MCDONALD MURPHY 

MACHINERY 

www.mcdonaldmurphy.com.au 

Mackay: 07 4940 7300 Bundaberg: 

07 4153 6933 Proserpine: 07 4945 3590 

AGNORTH 

www.agnorth.com.au 

AYR: 07 4783 3000 

CASE IH AUSTOFT A8800 

2011, Sugarcane Harvesters. S181. TA1046919. 

$192,500 

CASE IH 7000 

2008, Track Harvester 2008 with Iveco Engine 8000Hrs and Shredder Topper. 

Located Bundaberg. S186. TA1046927. 

$198,000 

CASE IH 8800 

2014, 2014 Full Track Cane Harvester. 

4006 Hours. Trail Bros Blade Saver and Elevator slew chain. Raised Cab. 

YEPA01716. TA1046914. 

$407,000 

CASE IH 8800 

2017, Track harvester with only 2200 Hours, 350Hp Iveco engine, EHS 

Chopper, shredder topper, in very good condition and ready to harvest. 

Located Wide Bay Area. 0. TA1046926. 

$399,900 

CASE IH AUSTOFT A8800 

2015, Sugarcane Harvester. S182. TA1046920. 

$346,500 

AUSTOFT 7700 Full Track 

1996, with Shredder Topper, 125 Komatsu, Denison Pumps, Backhoe Type 

Elevator Slew, 4 Blade Drums with 65mm blades. 67005. TA1046911. 

$82,500 Incl GST 

AUSTOFT 7700 

1997, Cane Harvester. 1600 hrs since new engine fitted. Standard topper, crop dividers with 

depth wheels fitted, side trim knives on modified chain driven lowering device, vane pumps, 

anti-vortex extractor, 8 blade standard choppers, standard elevator rebuilt 8000 tonnes, flow 

control on choppers, swing out radiator, tilt cabin. Located Innisfail. S178. TA1046916. 

$108,900 


2009, Standard topper, EHS 10 blade choppers. Good track gear. traction 

levers, engine hours 8374. MKU9331. TA997188. 

$209,000 

CASE IH 8000 

2013, 1st cut in 2013, but has only done 4 seasons - it sat out the 2015 and 2016 seasons. 

4300 Engine Hrs, 2206 Elevator Hrs. Fitted with a steering wheel conversion kit (from joystick 

steering). Std topper, near new tyres, LED lights. Chopper box checked with near new drums 

fitted. Nice machine. 800189. TA1046912. 

$297,000 

OTHER EHS 

2000, EHS 6 Tonne Side Tipper with 600/50-22.5 

Flotation Tyres and Air Bag Suspension, Bin is in Good 

Condition. Located Bundaberg. Call Steve 

0429390196. 0. TA1046928. 

$19,800 

CASE IH 8000 

2015, Wheeled Harvester with Low 3700Hrs this Machine is in very good 

condition and ready to Harvest. S184. TA1046925. 

$319,000 

AUSTOFT POWERHAUL 

1987, Infield Transporter. S180. TA1046918. 

$30,800 

CAMECO CHT3500 

2004, Cane Harvester 2400 hours. S179. TA1046917. 

$140,000 

CANE TIPPER BINS 

3 x 2 Tonne Bins , Tandem Rocker Axles , Set up for Tractor with 2 x Rear 

Remotes, has been very well maintained and in very good condition. Located 

Bundaberg. S183. TA1046924. 

$27,500 

CASE IH 8000 

2010, 1 Owner X Burdekin Machine. 2010 model with low hr engine. Complete new engine 

fitted 2457hrs ago. Total machine hrs showing11,431. Elevator Hrs 6487.47. Since trading we 

have reconditioned the feed train, basecutter box and chopper box, new chopper drums fitted 

also. 800076. TA1046913. 

$196,950 

CASE IH 8000 MY16 

2016, 1907 hours, joy stick control, 4 Blade EHS choppers, heavy duty rear 

tyres, GPS (RTK), cabin lift. 9083. TA936348. 

$455,400 

MASSEY FERGUSON 7465 WITH TRAILHAUL 

Dyna VT with Austoft 9 Tonne Trailhaul. 118 HP tractor with 5002 engine 

hours. Tyres 580/70R38 Rear 480/70R28 Front 23.6 x 26 Trailhaul. Cane 

haulout setup. Good condition. Located Innisfail. U005846P. TA1046915. 

$71,500 

FFM-FP-5037058-B

HARVESTER REVIEWS 

1 

Farms & Farm Machinery 

looks back at some of its 

most popular reviews 

from the last decade. This 

month, four of our best 

Harvester reviews 

REVIEW 

R E W 

I N D 

raining grain 

Jaiden Drought tested the 

New Holland CR 10.90 in 

2018, just a few days before 

its launch at New Zealand’s 

Southern Field Days 

The first thing you notice 

is that the cab is a big step 

up from previous models. 

First impressions are obvious – she’s a monster. This machine 

has some serious capacity and the sort of efficiency I like. 

The CR10.90 generates a massive 700hp (522kW) from the new 

FPT (Fiat Powertrain Technologies) six-cylinder, 15.9-litre engine. 

Topped up by the 1,300-litre fuel tank, it enjoys 600-hour 

service intervals. 

To keep up with the regulations (Tier 4 B), an SCR AdBlue 

exhaust after-treatment (120-litre tank) is required, allowing less 

complication in the engine. 

INSIDE THE CAB 

The first thing you notice is that the cab is a big step up from 

previous models; it’s more spacious, comfortable, and userfriendly 

and has a larger windscreen for better visibility. 

Hop aboard the leather-bound, air-conditioned and heated seat 

and you’ll discover it also has auto weight adjustment. This is 

great if you are skinny but a little demoralising if you hop on and 

think the compressor is broken because it won’t stop pumping. 

The right-hand console, where all the business happens, will be 

largely familiar to those who have operated or own recent high 

horsepower New Holland tractors. 

New Holland’s IntelliView IV touchscreen monitor allows you to 

customise the layout of the main screen, allowing storage of 50 

different crop settings. A second touchscreen can be added for 

functions such as yield metering, auto guidance and cameras. 

This can be switched in and out of New Holland tractors, 

allowing greater flexibility in your business. 

Blinds on all four windows are useful for combining late in 

the day, and 26 (mostly) LED lights mean you can keep working 

through the night. 

DYNAMIC FEED ROLLER (DFR) 

The deep cut Dynamic Feed Roll – the actual term on the 

2018 machines – is a 450mm diameter cylinder, which runs at 

1,100rpm (for cereals) and as low as 640rpm (for delicate crops 

such as peas). 

Initially designed as a stone protection system, the DFR sits 

between the feeder housing and the Twin Pitch Plus rotors, and 

has a feed width the same as the auger width, avoiding crop 

narrowing and giving the machines a much higher capacity. 

Putting a beater in seems counter-intuitive but grain damage is 

reduced due to the positive feed into the rotors by the DFR. 

This has allowed the twin rotor speed to be reduced and 

opens the concave clearance, increasing output, and allowing 

the machine to use a higher portion of the available power – of 

which it has plenty! 

Looking for a 

harvester? 

Search for ‘harvester’ on 





$176,000 

TA1039671 

2009 NEW HOLLAND CR9070. Combine 

Harvester, 10.3L Cursor eng. • WA 08 6500 0988 

$341,000 

TA869018 

2012 NEW HOLLAND CR8090. Combine 

Harvester, 1,245 Sep Hrs. • NSW 02 8315 0204 

$308,000 

TA930864 

2009 NEW HOLLAND CR9080. 2,724 Engine & 

1971 Rotor Hours. • VIC 03 8373 7136 



2 

3 

4 

5 

6 

7 

TWIN ROTOR TECHNOLOGY 

New to the 2018 model is the Twin Pitch Plus rotor, built 

narrower but with the same 22-inch (55.9cm) overall diameter 

and slightly larger threshing elements. 

The combined turning radius of the two smaller rotors creates 

a tighter spiral pattern over the concave area, then widening out 

over the separation area – creating a ‘break’ in the flow pattern. 

This creates more centrifugal force than a large single rotor, 

separating the grain more quickly and reducing the crop mat – 

letting material flow easily through the machine while using up 

to 15 per cent less power. 

The auto concave reset is a handy upgrade. Previously, a shear 

bolt was located on the concave. If you got a little too ambitious, 

the shear bolt broke and it all turned to custard. Now, you simply 

reset from the cab, so no more half an hour of mucking around 

emptying the grain tank, etc. to get the shear bolt to line up. 

Also new on the harvester is its upgraded dynamic flow control 

system, allowing the operator to alter the rotor vanes and fan 

speed from the cab, in order to thresh better and blow lighter 

chaff and straw out of the sieve area quicker. 

The entire cleaning system – the grain pan, cleaning fan and 

sieves – remains level while the lower main frame moves up 

to a 15-degree pitch. With the ‘Opti-Fan’ automatic fan speed 

adjustment, this means less grain loss when going uphill and 

across slopes, making it no different to table-top paddocks. 

The unique Opti Clean feature of operating the grain pan and 

lower sieve together (opposing the pre- and upper-sieve motion) 

while the grain pan angle is elevated, enables 120 per cent 

greater cascade of material and allow for more air blast between 

the grain pan and the pre-sieve. These opposing movements are 

optimal for small grains, New Holland says, as well as reducing 

overall machine vibrations for greater operator comfort. 

DISCHARGE AND UNLOADING 

The New Holland has a 14.5 cubic metre tank grain tank with a 

fold-up lid that can be operated from the cab, and means the 

machine can be closed off at night. 

To deal with this extra throughput, augers are 25 per cent 

larger and the unloading rate is 142 litres per second – meaning 

the 8.3m unloading auger can empty the tank in less than two 

minutes, and then split fold at the rear of the unit to avoid 

collisions. 

Another smart feature is the movable chute tip that can also be 

controlled from the cab and allows trailers to be filled in a forage 

harvester-like fashion, which means less spillage. 

Opti-Spread has been upgraded in the 2018 model, with 

two spinning rotors and two adjustable deflectors to evenly 

distribute chaff or chopped straw across nearly 14 metres. 

VERDICT 

One question I had before the test drive was: how can the 

machine possibly need so much power? The answer is simple 

– capacity, and New Holland has created a clever way of 

harnessing that power and turning it into throughput. 

This is a very clever machine. Material is fed head-first 

into the feeder house and accelerated for positive transfer 

into the rotor by the DFR. The feeder is the same width 

as the rotors, so there is no narrowing of the crop causing 

it to slow. It then goes through the gentle yet quick Twin Pitch 

Plus rotors. 

Opti Clean takes care of the rest while the self-levelling 

system keeps things on track. The chaff and straw are 

chopped and spread all while you are sitting up front in 

the luxurious air-conditioned seat with 700hp behind you. 

What’s not to like? 

1. The 700hp New Holland CR10.90: First 

impressions are obvious – she’s a monster! 

2. The hydraulic tip on the end of the spout 

makes filling trailers easier 

3. The IntelliView IV touchscreen monitor 

4. The armrest controls are intuitive and will 

be familiar to those who operate New 

Holland tractors 

5. The concaves on the new twin pitch plus 

rotors 

6. Rear view of the twin rotor and sieve area 

7. The myriad of belts drive the various parts 

of the combine 

Pros 

14,500L grain tank with hydraulically folding lid 

142L/sec unloading speed with fold around 

auger and movable tip 

Twin Pitch Plus rotors for higher throughput 

Deep cut Dynamic Feed Roll 

Dynamic Flow Control rotor vanes 

In-cab front face adjust 

Four-chain feeding system 

700hp engine 

Opti-Clean 

New concave reset 

New Opti-Spread Plus 

13.7m spreading width 

26 lights, most of which are LED for greater 

visibility 

Minuses 

The diesel and AdBlue tanks are mounted high 

for refilling at the rear of the machine. This 

does, however, help with nearly 1.5 tonnes of 

weight as a rear ballast for heavy fronts. 

$308,000 

TA1025314 

2015 NEW HOLLAND CR8.90 + 45’ PLATFORM. 

22” rotors, 1,877hrs usage. • WA 08 6500 0983 

$310,000 

TA938751 

2012 NEW HOLLAND CR8090. 40ft MacDon 

front, in excellent condition. • QLD 07 3073 8038 

$396,000 

TA930781 

2012 NEW HOLLAND CR8090 HARVESTER. 

1940 engine @ 1264 rotor hrs. • VIC 03 8373 7136 

$338,000 

TA1045138 

2010 NEW HOLLAND CR 9070. Header Combine. 

42ft Midwest Front. • NSW 02 8316 1695 



unleash the beast 

In 2013 Jaiden Drought 

tested a machine 

he said would keep 

everyone happy – with 

a comfortable, stressfree 

environment and 

reliability, high output 

and low running costs. 

John Deere 7550i 

Type 

Model 

PowerTech Plus 

6135HZ 

Displacement (L) 13.5 

Cylinders 

In-line six 

Engine rpm/min on road 1,650 

mode (three speed GB) 

Fuel system Four valves + 

EGR + VGT 

Cooling fan drive Direct 

Maximum power @ 458 (625) 

1,900rpm/kW (hp) 

Rated power @ 

428 (582) 

2,100rpm/kW (hp) 

Extra power kW (hp) 30 (43) 

Y 

“ ou send a technician to fix the other brands but you send a 

blacksmith to fix the John Deere,” a contractor, who has run 

every other brand of forager on the market and come back to a 

John Deere, said to me recently. 

Having test driven the John Deere 7550i self-propelled forage 

harvester, I can see what he means. It has all the technology 

you need, offering some of the most high-tech crop assessment 

technology on the market, yet it feels like a hurricane of power 

is behind you. 

John Deere has been building choppers for 40 years, the past 

20 years at its dedicated plant in Zweibrucken, Germany. In total, 

it has produced well over 10,000 self-propelled harvesters and, 

judging by this machine, it must be doing something right. 

Owners, operators and farmers alike will not be disappointed 

by this machine’s throughput. 

CAB 

It all starts in the clean and uncluttered cab. As with all John 

Deere cabs, the brown tones will hide any dirty fingerprints left 

from getting in and out all day. 

Given how noisy this machine is outside, I was pleasantly 

surprised by how quiet it was in the cab, with John Deere 

claiming 74-76dB(A). 

All the key controls are on the CommandArm, with the 

majority of operating functions on the ‘hydro handle’, including 

programmable header position buttons, spout rotations and 

header height controls, feed roll direction and an emergency 

shut-off. 

Additional adjustment buttons, such as chopping length and 

spout speed adjustment, are on the arms console. 

Machine instrumentation is on the ‘A’ pillar. The top display 

is devoted to machine functions, the middle panel to the 

performance monitor display and the lower panel shows such 

items as engine and cutter head speed and fuel levels. 

The metal detector, as well as some of the auto guidance 

functions, is located above your head. 

One thing is definitely noticeable about this chopper — it feels 

as if the cab has been moved back slightly and the pickup seems 

to be in clear view, without feeling like you are bending over. 

On the main joystick there are programmable header functions 

set up, so by pushing button ‘one’ the header is dropped, while 

button ‘three’ lifts the front once out of the row – simple and 

easy to use. 

ENGINE AND DRIVE 

The 7550i sits at third in the six-model line-up. However, it 

possesses the same 13.5-litre, in-line six-cylinder engine (with 

the usual VGT turbo and four valves per cylinder) as the larger 

7750 does. 

This thing is a big grunt box and I’m not surprised given all of 

these ponies on tap, even though the cutter heads and feed 

rollers are only 20mm narrower than on the larger 7750. 

John Deere’s engine-speed management works in conjunction 

with the stepless Pro-Drive hydrostatic transmission to match 

engine rpm and power to requirements under different 

conditions when running under a light load (both in work and at 

headlands), stationary or travelling on the road. 

Because this machine is the 7550i,the ‘i’ (or ‘intelligent’) 

management package has three modes, all aimed at maximising 

harvester performance while also saving fuel: 

Looking for a 

harvester? 






$41,800 

TA980311 

2019 JF 192 AT. Forage Harvester. 60kW, PTO, 

two rollers, 15 knives. • VIC 02 6171 3175 

$43,000 

TA916674 

OMARV 180 DT. PTO shaft, 180mm rotor, 

1700rpm, hyd jet control. • QLD 07 3073 8164 

$POA 

TA850226 

2017 DION F41 STINGER. Trailing Forage 

Harvester. PTO, 1 feed roller. • VIC 02 6171 3175 




1 

3 

2 

4 

1. The 7550i boasts a big grunt box 

2. The large radiator cleaner keeps the 

13.5-litre, in-line six-cylinder engine cool 

3. A large, curved front and rear windows 

offer excellent visibility 

4. Counterweights are concealed under the 

machine to provide ballast 

Pluses 

Clear view of the pick-up frominside the cab, 

without leaning forward 

Metal detector tells you what side has identified 

the foreign object 

IVLOC on the move 

Machine never felt like it was running out of 

power 

Crop flowed smoothly through the machine and 

never felt like it was surging 

Intelligent crop assessment technology, which is 

a great tool for invoicing customers 

Programmable header functions make operating 

the front easy 

Quiet comfortable cab 

Minuses 

The 800/65 R32 tyres are too big. Getting 

around the farm was an issue 

The pick-up wheels need to be manually 

removed to get through some gateways, 

although the new pick-ups have a hydraulic 

folding feature 

• Road mode – active between 1,250 and 2,100rpm, the system 

reduces engine rpm to a minimum and provides up to 27 per 

cent more torque to maintain forward speeds. 

• Field mode one – this is a headland fuel-saving mode 

automatically reducing engine speed once the machine is 

clear of the crop. As soon as the forager enters a new swath, 

the engine speed is automatically increased to the rpm set by 

the operator. 

• Field mode two – during work this setting automatically 

maintains a constant load on the forager engine so it operates 

at its most fuel-efficient speed of 1,900rpm. If the crop 

thickens, the forward speed is pegged back but the engine 

rpm remains the same. 

SAFETY FEATURES 

The slotted knives push back if they hit a rock, minimising the 

damage and helping prevent costly downtime. 

The unique feed roll and cutter head transmission (IVLOC) 

lets you choose the exact length of cut you want from the 

cab. It maintains a constant speed to ensure you get the length 

you set. 

The reverse sharpening system strikes the heel of the knife 

first, drawing the stone across the face toward the edge. This 

hones the edge into a fine cutting point – maintaining the bevel 

on the knives gives you more efficient chopping for the entire 

life of the knife and ensures the knives stay sharper for longer. 

An improved metal detector will stop the feed roller in just 40 

milliseconds and, where a blockage occurs, the pick-up can be 

reversed on the joystick. 

A very clever feature is the light display in the cab showing 

in what area of the pick-up the detector has spotted a foreign 

object, making it quick and easy to find. 

OPTIONAL I-PACKAGE 

The 7550i test machine was fitted with Auto LOC, which links 

HarvestLab dry matter sensing with the IVLOC automatic length 

of cut transmission. 

HarvestLab measures crop moisture using a near-infrared 

sensor. It can be used to help optimise the crop’s chop 

length in relation to its dry matter content – moisture content 

measurement of + or -2 points on the go for instant readouts. 

This is particularly useful for operators who are chopping maize 

for sale to various clients, as the HarvestLab and Harvest Doc 

will tell you when you have reached 100T/DM for example, filling 

their order. 

Harvest Doc is the yield metering and crop recording system, 

permanently stored in the machine’s computer. This is a great 

tool for invoicing clients to let them know 10ha of their maize 

has been chopped, yielding 22TDM/ha, with attached map to 

prove it. 

The infinitely variable length-of-cut (IVLOC) feature gives 

you lengths of either 4–19mm with 56 knives, 5–22mm with 

48 knives and 6–26mm with 40 knives, all with adjustment 

increments of one millimetre. 

The knives can be sharpened by pushing a button in the cab, 

with this function able to be interrupted if required, although 

those who already run foragers will understand the fuel savings 

and increased output from running sharp knives. 

Looking for a 

harvester? 






$247,500 

TA879334 

2012 JOHN DEERE 7450. Forage Harvester with 

460 Kemper Front. • QLD 07 3171 1832 

$43,516 

TA850370 

2019 OMARV SAVIGLIANO 180DT. Trailing 

Forage Harvester. PTO shaft. • VIC 02 6171 3175 

$POA 

TA534035 

NEW HOLLAND 2A. Silage Wagon rear and side 

empty. • NSW 02 6171 3997 




1 

command & control 

Chris McCullough flew 

to Germany for the 

global launch of Case 

IH’s Axial Flow 250 

series combines in 2018 

A new hydrostatic 

transmission, featuring a 

field and a road mode and 

on-the-move two-speed 

range control, provides 

increased traction. 

Case IH’s Axial-Flow 250 combine harvester series, the 7250, 

8250 and 9250, boasts automated features designed to help 

improve the performance of even an experienced operator, the 

company says. 

The AFS Harvest Command automation technology uses 

16 sensor inputs to continuously monitor the machine, with 

seven adjustable settings to maximise combine performance in 

harvesting wheat, canola, maize and soybeans. 

There are a number of options on the in-cab AFS Pro700 

terminal to suit the level of experience of the operator, the crop 

condition and type, as well as the harvesting conditions. 

The basic version of AFS Harvest Command features the 

proven Automatic Crop Settings (ACS) system. This adjusts 

operating items such as fan speed and concave clearance 

according to the crop type, eliminating the need to make 

individual element settings. The operator is able to adjust the 

combine on the go and save the settings for future use. 

The next version, with Feedrate Control, adjusts ground speed 

based on crop load to cater for a desired outcome, performance 

to control losses, maximum throughput, or fixed throughput. 

The top specification option is full AFS Harvest Command 

automation, which automatically makes threshing and cleaning 

system adjustments based on the same desired outcomes as 

Feedrate Control, with the addition of grain quality monitoring. 

This uses camera-based technology and sieve pressure 

sensing to provide further guidance to the machine’s 

automatic adjustment process, helping minimise impurities 

in the grain sample. 

Case IH harvesting product marketing manager for Europe, 

Middle East and Africa August von Eckardstein says the AFS 

Harvest Command automation grain camera uses a patented 

multi-spectral light emission to monitor sample quality 

“Combining the five light spectrums provides enhanced 

detection of the exposed starch in broken grains. The AFS 

terminal alerts the operator if dirt affects camera clarity,” 

he says. 

With full automation, AFS Harvest Command can be used in 

four different ways. In all cases, the operator sets crop type, a 

maximum target engine load and maximum ground speed for 

the combine to then operate in: 

• Performance mode: the combine operates at a speed to 

ensure an acceptable level of grain loss from the rotor and 

cleaning system 

• Fixed throughput mode: the combine maintains a target 

throughput by varying its speed, and adjusts settings to 

minimise losses 

• Maximum throughput mode: the combine operates up to 

the speed or power limit set by the operator, while adjusting 

settings to minimise grain loss from the rotor and the cleaning 

system 

• Grain quality mode: the combine adjusts settings to maintain a 

targeted grain quality and impurity level, while also minimising 

losses 

“AFS Harvest Command automation is not designed to replace 

operator decisions, but to enhance them, identifying the factor 

limiting combine performance as conditions change, displaying 

it and making adjustments to address it,” von Eckardstein says. 

“AFS Harvest Command means less need to worry about 

factors such as losses, fan speed and rotor speed, which allows 

greater focus on header position and unloading.” 

ROTOR CAGE AND SIEVE UPGRADES 

All units in the Axial-Flow 250 series are fitted with rotor cage 

vanes that adjust themselves when AFS Harvest Command 

automation is engaged, or can be controlled in-cab from a righthand 

console switch. 

By changing the pitch of the vanes, the crop will move faster or 

slower through the rotor cage, tuning threshing and separation 

performance to crop conditions for improved efficiency. 

Together with upper and lower sieve control, the full AFS 

Harvest Command automation package can also adjust all sieve 

settings according to feedback from the loss sensors, grain 

camera and sieve pressure sensors. 

Unique sieve pressure sensors provide AFS Harvest Command 

automation with sieve loading data, allowing the system adjust 

fan and sieve settings to prevent grain loss when exiting or 

entering the crop at the headland or stopping the combine in 

the field. Working together with the auto fan option, this also 

helps prevent losses before they occur by detecting sieve load 

and combine inclination. The fan and sieves work in conjunction 

Looking for a 

harvester? 






$330,000 

TA994924 

CASE IH 8120. 1358 engine hrs, 1148 rotor hrs, 

10.3L Iveco engine. • VIC 03 8547 8720 

$599,500 

TA1040639 

2017 CASE IH 9240 COMBINE HARVESTER. 834 

engine and 605 roto hours. • NSW 02 8315 0164 

TA908093 

$253,000 

2012 CASE IH 8230. Combine Harvester. 4262 

eng hrs, 2366 sep hrs. • QLD 0428 054 644 



2 

4 

3 

5 

with each other to maintain an ideal operating setting and sieve 

pressure. 

TRANSMISSION CHANGES 

A new hydrostatic transmission, featuring a field and a road 

mode and on-the-move two-speed range control, provides 

increased traction and means there is no need to stop and shift 

while working or travelling on hills. 

Operated via a scalable multi-function handle speed controller, 

it features a closed-loop speed control, which maintains the 

set speed in changing ground conditions. Maximum respective 

speeds in range one and range two are 18km/h and 40km/h, 

although reduced maximums can be set according to operator 

preference and field conditions. 

Complemented by uprated hydraulic drives, the transmission 

upgrade boosts gradeability when road travelling by 36 per cent. 

Meanwhile, a new differential lock upgrade replaces the 

previous mechanical pedal with a floor-mounted electrical 

button, and braking moves from an external disc to internal 

oil-cooled brake, reducing required pedal pressure for the same 

braking effort and enhancing the cooling required in situations 

where continuous braking is needed. 

IMPROVEMENTS TO X-TRA CHOP PACKAGE 

The X-tra Chop straw chopper package is now fitted with a 

new remote switch for ground-level spreader board actuation, 

to make accessing the engine deck easier for fuelling and 

maintenance. 

FEEDER/INTAKE ELEVATOR UPGRADES 

In addition to the existing feeder/intake elevator lift capacities 

of 4.5 tonnes and 5.2 tonnes, a new 6.1-tonne lift capacity is 

available on the largest Axial-Flow models, to enable them to 

handle 13.5m draper heads and 18-row corn heads. Factory-fit 

dual lateral tilt can now also help to provide enhanced control 

of 13.5m draper heads. 

A new optional in-cab-controlled face plate fore-aft feature 

allows the operator to alter the header fore-aft angle, with 

a total of 11.9 degrees of angular tilt to improve harvesting 

efficiency in both low-growing crops like beans and highgrowing 

crops. Header height control function upgrades mean 

improved responsiveness and flotation, plus adjustable returnto-cut 

and resume lower rates. 

Ground Speed Adaptive Sensitivity (GSAS) automatically 

adjusts header height sensitivity as forward speeds increase 

and decrease, to keep the header stable yet responsive. As 

an example, when sensitivity is set high for changing terrain 

and the operator slows combine forward speed, the system 

sensitivity will also drop in the background to keep the header 

stable. The sensitivity setting, though, will remain at the 

high set-point, so when the operator is able to return to the 

previous forward speed, the header remains responsive. 

1. There are a number of options on the 

AFS Harvest Command to suit the 

level of experience of the operator, the 

crop condition and type, as well as the 

harvesting conditions 

2. August von Eckardstein, Case IH 

harvesting product marketing manager 

for Europe, Middle East and Africa, says 

the 250 series Axial-Flow upgrades focus 

on improving both combine and operator 

productivity 

3. The full AFS Harvest Command 

automation package also features new 

in-cab pre-sieve adjustment 

4. A new hydrostatic transmission means 

there’s no need to stop and shift while 

working or travelling on hills 

5. A new 6.1-tonne lift capacity is available 

on the largest Axial-Flow models, to 

enable them to handle 13.5m draper 

heads and 18-row corn heads 

The operator is able to 

adjust the combine on the 

go and save the settings 

for future use. 

$484,000 

TA1043082 

$588,500 

TA1024713 

$538,780 

TA1043208 

$285,000 

TA890327 

2017 CASE IH 7240 AXIAL FLOW COMBINE 

HARVESTER. 30” tracks. • WA 08 6500 0983 

2017 CASE IH 8240 HARVESTER. Comes with 

suspended tracks. • VIC 03 8547 8647 

2017 CASE IH 9240. Axial flow combine 

harvester. 2036.13 eng hrs. • VIC 03 8373 7341 

2012 CASE IH 7130 COMBINE. Comes with 40 

foot MacDon Front. • QLD 07 3171 1859 



tough customer 

Brent Lilley finds New 

Holland’s FR780 Forage 

Cruiser is designed for 

maximum efficiency and 

economy in this 2018 review 

Pluses 

Widest feed rollers and chopping cylinder on the 

market for higher throughput 

Sectional metal detection for easier metal and 

rock detection 

Forward and reverse sharpening 

Impressive 16-litre FPT engine with a massive 

775hp uses only AdBlue to meet Tier 4 final 

emissions 

Updated cab and controls layout for easier 

operation 

PowerCruise and Eco engine management for 

high output and better economics 

Minuses 

Static causes dust to stick to the panels where 

they are glued to the frame 

This drive set-up means 

the speed of the feed 

rollers and length of chop 

is infinitely variable from 

the cab. 

Farms & Farm Machinery took some time during the maize 

season in Waikato in New Zealand to see the New Holland 

FR780 Forage Cruiser in action. 

With a maximum output of 775 horsepower (578kW) achieved 

between 1,700 and 1,900rpm, the unit is designed to maximise 

efficiency – particularly fuel efficiency. 

FEEDING 

New Holland boasts the widest feed rollers on the market, using 

a hydraulic-powered gearbox to help drive a wide, thin feed of 

material into the cutting cylinder. 

Double feeder drive – a standard feature on the FR Forage 

Cruiser range – uses an additional hydraulic drive motor to give 

the header more power and allow the speed of the feed rollers 

(chop length) to be varied independently and infinitely. 

This drive set-up means the speed of the feed rollers and 

length of chop is infinitely variable from the cab. 

In my past experience of driving forage harvesters, this is 

something that is well worthwhile, particularly with heavy crops 

such as maize. 

Not only does the New Holland FR780 have the widest 

chopping cylinder on the market, at 884mm, but the whole feed 

channel has been widened to enable the machine to process 

a larger quantity of material – and fast, spinning at more than 

1,000rpm. 

Each knife is attached to the cylinder with five bolts for safety 

and they are arranged in a chevron pattern for a smooth, 

efficient scissor-like cutting action against the shear bar. Buyers 

can choose from 16 to 40 knives, depending on the chop length 

range required – the one we tested had 24. 

New Holland has had forward or reverse sharpening as an 

option for some time and it’s definitely a case of not realising the 

benefit of having it until you have used it. 

Forward sharpening is effective to set the bevel and take the 

heel off the knives but reverse sharpening is the key to hone the 

sharpest edge, and it’s a relatively simple set-up with a hydraulic 

motor that simply turns the chopping cylinder in reverse for the 

sharpening cycle and the stone is drawn across the top of the 

cylinder. 

As you’d expect, the sharpening and shear bar setting 

processes are carried out from the cab and are adjustable. 

METAL AND ROCK DETECTION 

New Holland has also come up with new ideas to detect rogue 

metal in the crop quickly, with its Metaloc system bringing the 

feed rollers to a halt in 0.003 seconds once metal is detected. 

The in-cab monitor shows which of six feed roller sections the 

metal is in, relaying the same information to the trailer driver by 

flashing the indicators a prescribed number of times. I reckon it’s 

easier and quicker to point out where the metal is located, but 

there’s no denying the convenience of this system. 

New on these models is a rock alert system that monitors the 

up and down movement of the feed rollers – stopping them if a 

large or sudden movement is sensed. Like the metal detector, 

sensitivity can be adjusted to suit the conditions. 

ENGINE 

The five-model 2018 FF Forage Cruiser range now uses FPT (Fiat 

Powertrain Technologies) engines, from 480hp (358kW) up to a 

massive 920hp (686kW) in the newly released FR920. The FR780 

we tested uses a six-cylinder 16-litre FPT engine, which offers 

up to a 20 per cent reduction in fuel consumption over earlier 

models. 

Its diesel tank capacity sits at an impressive 1,200 litres and 

200 litres of AdBlue, which is sure to keep you on the move. 

An ‘Eco’ engine-management mode essentially gives two 

settings for the electronic throttle: a high rpm range, which can 

be set between 2,100 and 1,950rpm (ideal for grass); and a low 

range that can be set between 1,700 and 1,850rpm (ideal for 

maize), offering impressive fuel savings. 

The top transport speed of 40km/h is possible at just 1,200rpm 

for further fuel savings when moving between jobs. 

CAB 

The FR780’s rounded ‘fishbowl’ cab boasts a few subtle changes 

such as improved access and soundproofing. This cab is roomy 

and gives almost 360-degree views of the header and the trailer, 

whether loading on the left, right or opening up behind. 




1 

3 

2 

4 

1. A longer chute makes it easy to reach the 

trailer even with a 10-row head on 

2. The kernel processor is easy to remove, 

as it’s on hydraulics and can be easily 

jacked out 

3. The Intelliview monitor 

4. A 16L six-cylinder FPT engine puts out a 

massive 775hp to power the machine 

5. A slim adjustable telescopic steering 

column gives a comfortable operating 

position and great visibility 

6. Climate control, a bluetooth radio and 

buttons to control the light are within 

easy reach on the roof panel 

5 

6 


Engine FPT Cursor 16 

Emissions standard Tier 4 Final using 

AdBlue 

Cylinders 

Six 

Capacity 15.9L 

Rated max. power 775hp (578kW) 

Fuel capacity 1,200L 

Transmission Four ranges 

Max. speed 

40km/h 

Feeding 

Hydroloc drive with 

infinite adjustment 

Knives 2x8, 2x10, 2x12, 

2x16, 2x20 

Cutterhead cylinder 884mm 

width 

Cutterhead cylinder 710mm 

diameter 

Weight 

13,060kg 

It’s great to see that the 

company has continued 

to improve and refine its 

product. 

A comfortable air-ride driver’s seat, upholstered in leather, sits 

at the centre of the unit, while a passenger seat is positioned 

lower to keep them out of view. 

Under the passenger’s seat is a handy fridge, which fits a 

1.5-litre bottle, to keep things chilled on the hottest days. 

The FR780 has also gained even more lights for working at 

night, with space for up to 20 work lights (most of them being 

LEDs). It is also useful to see LED lights under the side panels, as 

these light up the machine when open. 

CONTROLS 

The most notable change to the controls is that the chute up 

and down has been moved from the floor to a toggle switch on 

the right-hand console. This is a great addition as it gets it out of 

the way of passengers. 

The CommandGrip multi-function lever has buttons that control 

the movement of the chute and the spout deflector, as well as 

the header height and level – all within easy reach when using 

the joystick. 

Automatic functions built into the controls include pre-set 

header heights and spout positions and a go-home button for 

the spout. The rest of the controls, which are well labelled and 

easy to use, are on toggle switches arranged along the edge on 

the console. 

The Intelliview monitor is clear and easy to use, with 

customisable run screens that can be set to display a wealth of 

information to the driver without any drama or complications. 

POWER CRUISE 

The “power cruise” feature is also worth explaining. It lets the 

driver set a forward speed and minimum engine rpm, with the 

machine then controlling the forward speed as the engine load 

from the cutter head changes, keeping the machine at full 

capacity at all times. In my experience, this works well in crops 

such as maize and even grass with heavy and light patches in 

the row. 

VERDICT 

Having had some experience with the early New Holland FR 

models, it’s great to see that the company has continued to 

improve and refine its product. 

There is much to like about the New Holland forage harvesters, 

with the widest chopping cylinder on the market and reverse 

sharpening, as well as new features including the hydraulically 

opening drop floor on the chopping cylinder and improvements 

to the cab layout. 

Some clever engine-management software with Power Cruise 

and Eco engine-management mode delivers exceptional 

productivity and efficiency through fuel savings. The New 

Holland forage harvester range is well worth consideration, as 

sometimes you don’t realise what you’re missing until you have 

tried it! 



Terraland TO 6000 Swifterdisc XE 12400 

• Super deep ripper! Rips down to 60cm (24 inches) 

• One pass operation to super deep rip, mix clay and 

incorporate lime that also packs the surface for an 

excellent seed bed. 

• The most economical way to transform poor to 

average sandplain into highly productive country in 

one pass! 

• Medium to heavy country is also responding with 

great results! 

• Special aggressive A-discs, produce the best 

stubble cutting and mixing action. 

• Excellent for incorporating lime and stubble at depth 

and levelling the paddock. 

• Kills weeds and leaves an impressive seedbed with 

the moisture locked in by the V-ring packer! 

• Fixes your seeding trash flow problems in one pass! 

TO AVOID DISAPPOINTMENT ORDER 

NOW TO SECURE DELIVERY 

Call Grant Borgward 

0428 816 701 

FFM-HH-5210450-TS-349 

Reliable sales & fast service in Small Bale Handling Equipment 

15 Bale 

Accumulator 

includes Baler 

Towbar, Baler 

Hydraulic Kit & 

Wiring Harness 

Heavy duty stick rakes 

made to order 

NEW REBEL TAUTLINER GRAB IS HERE 

Fill Tautliner trailers to the roof. Slim 

design for tight spaces. Heavy duty 

design. 10 and 15 Bale available. 

15 Bale Grab 

includes 

Hydraulic Ram, 

Hydraulic Hoses 

and Side Rail 

FFM-HH-5168768-TS-388 

For all enquiries phone Nic 02 6852 2049 

or check www.rebelequipment.com.au


Celebrating 

20 

years 

PHONE 

07 4633 0624 

www.tilco.com.au 

barry@tilco.com.au 

Tilco is a formidable performer with a large range of deep rippers, rowcrop, 

pasture renovation and soil amelioration systems. 

Pioneers of Compost and Slurry Incorporation Systems. 

Tilco also has an extensive range of Shank Systems, Stabilizer Discs, 

Ground Engaging Componentry, Steerable Coulters and Lift Assist Systems. 

TILLAGE EQUIPMENT YOU CAN COUNT ON 

The Legendary HYDRA-MAX 

12 Mtr Centre Buster Fertilizer Rig 

SIDE & CENTRE BUSTER RIGS - FERTILIZER RIGS - PASTURE RENOVATORS 

BED FORMERS - CRUMBLE ROLLERS - CULTIPACKERS - UTILITY PLOWS 

7 Shank Rigid with Crumble Roller 

STEERABLE 

COULTER 

Deep Placement Compost / Fertilizer Rig 

LIFT ASSIST 

OVER 40 SHANK SYSTEMS TO SUIT EVERY APPLICATION

A:B:N: 58 604 172 983 

471B Greenwattle St, Wilsonton QLD 4350 

Phone: 07 4633 0624 

www.agripartsdirect.com.au 


ZERO25T 

Fully 

Tungsten 

Tiled 

Point. 

ZERO 

4307 

ZERO30T 

Fully 

Tungsten 

Tiled 

Point 

ZERO40T 

Fully 

Tungsten 

Tiled 

Point 

ZERO50T 

Fully 

Tungsten 

Tiled 

Point. 

Exclusive to AGRIPARTS Direct. 

The pointed nose 

gives superior 

penetration whilst 

the swept wings 

provide improved 

weed kill and 

reduced furrowing. 

50° DIRECT DRILL 

SEEDER BOOT 

JANKE STD 

Tungsten 

Nose Tile. 

available 

with 

Hardfacing 

A simple one piece 

narrow(16mm) point. 

The leading face is 

only 8mm and is 

supported by a 

16mm wide 

back face. 

ZERO16 

This point fits all 43°x7/16" 

bolt shanks (eg: Gyral, AFM) 

SECONDARY SHANKS 

TRIPS 

Detachable 

Base Deflector 

Suits most popular brands. 

Unique Detachable Base Deflector 

Eliminates Pugging 

Large Seed Boot Opening 

fits on all 7/16" single 

bolt shanks popular 

on many combines 

and seeders. 

VERTICAL SHANK 

CONVERSION 

SWEEPS & 

FURROWERS 

14 / 20” 

10 / 14” 

CULTI 

PACKER 

RINGS 

CULT 

TRIP FERT SEED 

We carry a wide range of secondary tillage 

accessories Including: Fertilizer Tubes 

(Liquid, Gas & Granular) 

Gas and Fertiliser Knives + Much More 

Suit most popular brands 

400 - 550 - 650 - 750Lb Breakout 

CALL US FOR PLAIN OR SCALLOPED DISCS AND COULTERS 

YETTER ROTARY CULTIVATOR 

Available in a variety 

of configurations to 

suit your needs. 

We also carry spare 

wheels, arms and 

springs 

LILLISTON SPIDER & DISC GANGS 

We offer a complete Range of 

Lilliston Spider and Disc Gangs, 

We also carry rebuild kits and 

spare parts to refurbish your rig. 

We manufacture a range of complete 

Lilliston Rigs 

Designed to Suit YOUR Requirements 

Call Today for a Quote. 

U BOLTS 

Extensive 

Variety 

of Sizes 

Made from 

4140 Heat Treated 

Steel 

GANDY 

Universal Gravity Feed Applicator: 

Suitable for a variety of applications 

from Forage additive blending to 

mixed seed planting. 

Comes with 12Volt Motor to 

drive agitator & mounting brackets. 

Available in 45Lb (Shown) or 100Lb 

SHEAR PINS 

SHEILDED SPRAYERS - CALL US


3 YEARS 

3,000HRS 

WARRANTY* 

*Terms & Conditions Apply 

AL910C 

4 Tonne Machine SWL1500KG 

80HP, 4 speed trans, 3rd Valve, 

Quick Hitch, Air con cabin, GP 

Bucket Pallet Forks & 4 in 1 

Bucket. 

AL918F 


45HP, 2 speed Powershift Trans, 

Quick Hitch, Air con cabin, 3rd, 

Valve, GP Bucket Pallet Forks & 4 

in 1 Bucket. 

AL916C 





Bucket. 

AL920F 



Air con cabin, 3rd Valve, GP Bucket 

Pallet Forks & 4 in 1 Bucket, Quick 

Hitch. 

$18,990 +GST 

$21,990 +GST 

$20,990 +GST 

$25,990 +GST 

AM230PW 

1.1Tonne Machine 

23HP Briggs and Stratton 

Petrol, Key Start 

Includes 4 IN 1 Bucket 

THREE METER/TEN 

FOOT STICK RAKE 

Suit Machines 8 Tonne to 14 Tonne 

HIGH DUMP BUCKET 

Suits Machines 8 Tonne to 23 

Tonne 

4 IN 1 BUCKET 

Suit Machines 12 Tonne to 23 

Tonne 

$14,990 +GST 

$5,000 +GST 

Starting at 

$4,500 +GST 

Starting at 

$4,800 +GST 

AL930D 


125HP 4 speed trans, 3rd Valve, 



Bucket. 

AL936LF 



Quick Hitch, Air con cabin, 3rd 

Valve, GP Bucket Pallet Forks. 

AL938LE 




Pallet Forks. Rippers not included, 

Quick Hitch. 

AL950E 

17.5 Tonne Machine SWL5000KG 

225HP 2 Speed Powershift Trans 

3rd Valve, Air Con, Quick Hitch 

GP Bucket, Pallet Forks 

$52,990 +GST 

$56,990 +GST 

$69,990 +GST 

$92,990 +GST


When power and 

performance 

matters, choose 

Active Machinery 

03 9799 7707 

sales@activemachinery.com.au 

activemachinery.com.au 

0409 307 500 

AL922C 





Bucket. 

AL924C 


100HP 2 Speed Powershift Trans 

3rd Valve, Air Con, Quick Hitch, 

GP Bucket, Pallet Forks & 4 IN 1 

Bucket 

AL926F 




Pallet Forks & 4 in 1 Bucket, Quick 

Hitch. 

AL926FT 


Extended SWL1500KG, 100HP 2 

Speed Powershift Trans, 3rd Valve, 

Air Con, Quick Hitch, GP Bucket, 

Pallet Forks & 4 IN 1 Bucket 

$28,990 +GST $34,990 +GST $36,990 +GST $39,990 +GST 

HAY FORKS 

Suit Machines 5 Tonne to 23 Tonne 

SIEVE BUCKET 

Suits Machines 6 Tonne 

to 14 Tonne 

LOG GRAPPLE 

(SINGLE FINGER) 

Suits Machines 8 Tonne 

to 23 Tonne 

AM232PT 

1.1Tonne Machine 

23HP Briggs and Stratton 

Petrol, Key Start 

Includes 4 IN 1 Bucket 

Starting at 

$2,500 +GST 

Starting at 

$3,200 +GST 

Starting at 

$5,200 +GST 

$18,990 +GST 

AL958E 

19.5 Tonne Machine SWL5400KG 



Pallet Forks. Rippers not included, 

Quick Hitch. 

AL966E 


250HP, 4 speed ZF Powershift, 

Quick Hitch, Air con cabin, 3rd 

Valve, GP Bucket Pallet Forks. 

AE1.8U 

1.88 Tonne Machine, Zero Tail 

Swing, Genuine YANMAR Engine 

Genuine KYB Hydraulics, Quick 

Hitch, Two Dig Buckets with Teeth, 

One Mud Bucket 

AM302DT 

1.2Tonne Machine, 30HP Perkins, 

Single Joystick Control, Diesel, Key 

Start, Includes 4 IN 1 Bucket 

$109,000 +GST 

$130,000 +GST $27,990 +GST $22,990 +GST


VELDONAS 

Specialising in industrial motors and pumps 

WE BUILD DIESEL HYDRAULIC PUMP SETS TO ORDER 

ASK ABOUT OUR OIL AND TEMPERATURE AND TIMER WATCHDOGS 

ROVATTI CHOPPER 

Open pump impeller, chopper device, stainless steel plates, heavy duty jockey jacks, 

hand primer on effluent pumps, pto shaft, heavy duty frame. 

STVEL54441. TA10770. 

$6,599 

TRUCK MOUNTED 12" TRANSFER PUMP SET TRANSFER PUMP 

Truck mounted 12" Transfer pump set. 

Ask about other specialised applications. 

S13. TA11062. 

POA 

AIR CLEANERS 

HEAVY DUTY 

From 10hp to to 

200 hp. 

VEL 14307. TA10926. 

Prices starting from 

$130 

TACHOMETERS FOR DIESEL ENGINES 

Tiny tach for diesel engines gives a digital RPM reading 

regardless of the number of cylinders. A transducer takes a 

pulse reading from the injector line Simply bolt the 

transducer to the injector line, supply a 12-24V DC supply 

and away you go! It even has a built-in hour meter, service 

function and max rpm range. S22. DPLIn27532. 

$264 

INDUSTRIAL 

RADIATORS 

20 hp $275 

40 hp $360 

60 hp $585 

120 hp $820 

S11. DPLIn27501. 

From $275 

JAPANESE DIESELS 

Parts available for small 

Japanese diesels. 

AW54939-FM077-060-07. 

DPLIn27496. 

POA 

BLADES 

To fit small Japanese 

tractors. 

From $8.80 each inc GST. 

AW54939-FM077-060-08. 

DPLIn27497. 

$9 

PERKINS GENERATORS 

6,8,10,13,15,20 and 30 KVA 

generators, single and 3-phase, 

powered by water-cooled 

Perkins heavy duty diesel 

engines, key or remote start, 

fuel tank base, full engine 

protection, 500 hours service 

intervals Ideal backup or prime 

power Call for your special 

price!!!. AW54939-ST190912. 

DPLIn27583. 

POA 

ENGINE WATCHDOG TM6 

ENGINE SHUTDOWN SYSTEM 

& TIMER 

TM6 Oil/Temp Watchdog with 

wiring diagram $240 + GST 

TMT Oil/Temp Watchdog with 

shutdown timer & wiring 

diagram $460 + GST 

Solenoids and rack pullers are 

extra. S37. TA750757. 

$240 + GST / $460 + GST 

PLUTTO PUMP PRIMER 

Turn your centrifugal 

pump into a self-priming 

pump With the new easy 

to install Plutto exhaust 

primer throw away your 

bucket and hand priming 

pump The Plutto exhaust 

primer automatically 

primes up your pump 

when you sart the engine 

Priming kit. S18. DPLIn27578. 

$490 

SECOND HAND 

YANMAR DIESEL 6 X SELF 

PRIMING PUMP 

With 25 hp Yanmar diesel. 

S12. DPLIn27519. 

$6,310 + GST 

IRRIGATION HOSE HOSE 

Suction and delivery hose 

Call for your special price!. 

AW54939-FM077-043-01. 

DPLIn27516. 

POA 

ISUZU • MITSUBISHI • KUBOTA • YANMAR 

Agent for TUTTS • TATHONG • KUBOTA • ENGINES • GODWIN PUMPS 

www.veldonas.com


www.veldonas.com 

Specialising in industrial motors and pumps 

BUILT TO YOUR REQUIREMENTS 

PUMP SETS BUILT TO YOUR REQUIREMENTS NEW OR USED 

ALS0 IN STOCK 

LOW PRESSURE PUMPS 

*New 4” self-priming pump with S/H Kubota 12 hp diesel, 

100,000 lt/hr to 15mt head ................................. $4,890 inc GST 

*65 bpz bare shaft, 55 mt head ...............................................$380 

*80 bpz bare shaft, 65 mt head ...............................................$560 

BUDGET DIESEL ENGINES 

All engines are low hours, fan-flywheel, 3 months limited warranty 

*Kubota Z600, 12hp, 2 cylinder ............................................$1,710 

*Kubota D600, 15hp, 3 cylinder ...........................................$1,683 



*Kubota V1200, 28hp, 4 cylinder ..........................................$2,562 

*Kubota V1405, 30hp, 4 cylinder ..........................................$2,750 

*Isuzu 3AF1, 22hp, 3 cylinder ..............................................$2,057 

*Isuzu 3AE1, 30hp, 3 cylinder ..............................................$2,376 

*Isuzu 3AD1, 34hp, 3 cylinder ..............................................$2,557 

*Yanmar 2HS66, 11hp, 2 cylinder ........................................$1,155 

*Yanmar 2HS80, 19hp, 2 cylinder ........................................$1,765 

*Yanmar 3TNA86, 15hp, 3 cylinder ......................................$1,770 





*Mitsubishi CA700, 15hp ......................................................$2,075 

*Mitsubishi K3D, 21hp, 3 cylinder ........................................$1,980 

WE ALSO BUILD POWER PACKS INCLUDING RADIATOR, 

MUFFLER, STUB SHAFT, IGNITION, FILTERS, BASE FRAMES. 

GENSETS 

ASK ABOUT OUR NEW FG WILSON GENSETS FROM 10 KVA 

to 400KVA 

ENGINES 

*Large range of new and secondhanddiesel 

engines, 8hp to 100hp, 3 months warranty .......From $1,500 inc GST 

TRANSPORT ARRANGED AUSTRALIA WIDE 

IRRIGATION FITTINGS AND HOSES 

TO SUIT YOUR PUMPING 

REQUIREMENTS 

DIESEL POWER PACKS SELF-PRIMING PUMPS SOUTHERN CROSS PUMPS GENERATORS 

• BENDS 

• TAPERS 

• TEES 

• FOOT VALVES 

• CHECK VALVES 

Ask for a quote 

SECOND HAND 

KUBOTA Z600 

2 cylinder diesel 

power pack 

Electric start. 

PM045-072-02. 

DPLIn27529. 

$1,925 

SELF PRIMING 4 PUMP 

4 self priming, belt drive. 

AW54939-FM077-043-02. 

DPLIn27541. 

$654 

SOUTHERN 

CROSS 4X3 

With S/H Kubota 

Z620, 13 hp 2 

cylinder diesel, 20 

litre/second at 20 

metre head 

Economical 

transfer pump 

$4,970 inc GST. 

Kubota. DPLIn27528. 

$4,970 

PTO 

GENERATOR 

50KVA - Three 

Phase - 3 point 

linkage with heavy 

duty jack stands. 

VEL4156. TA10931. 

$8,710 

SECOND HAND 

ISUZU POWER 

PACKS 

3 cylinder diesel, 

22-40 hp. 

From $3,080. 

ST159827. 

DPLIn27579. 

$3,080 

ISUZU DIESEL 6 X SELF 

PRIMING PUMP 

with secondhand 25 hp. 

AW54939-FM077-051-09. 

DPLIn27515. 

$6,310 + GST 

SECOND HAND 

SOUTHERN CROSS 

80X50-315 

Isuzu 3AE1, 30 hp diesel, 

15 litres per second at 80 

metre head. 

AW54939-FM077-112-02. 

DPLIn27518. 

$7,850 + GST 

MITSUBISHI 

DIESEL 

GENERATOR SET 

8 KVA 

15 hp, S/H 3 

cylinder 

Mitsubishi electric 

start Engine 

watchdog, fuel 

tank. S16. 

DPLIn27548. 

$5,850 + GST 

SECOND HAND 

NISSAN QD32 

Diesel, 64 hp, 4 

cylinder, all new 

fittings, includes 

outrigger bearing 

A real workhorse. 

S21. DPLIn27523. 

$5,780 + GST 

UP TO 36" 

MINING PUMPS 

PUMP 

VXTE48791. 

TA206423. 

$14,510 

SECOND HAND 

SOUTHERN 

CROSS 

80X50X250 

Nissan TD27, 

48hp diesel, 20 

litres per second 

at 80 metre head 

Engine shutdown 

included. S23. 

DPLIn27505. 

$8,270 

12" 300 IS 

TRAILER 

MOUNTED PUMP 

SET 

new pump direct 

drive coupled to 

second hand 6cyl 

Nissan diesel with 

new tandem trailer 

with Vin. S33. 

TA750753. 

$18,810 + GST 

KUBOTA V1200 

With 28 hp, 4 

cylinder diesel 

power pack New 

radiator, muffler, 

hoses, filters, 

35mm keyed 

shaft. 

PM045-072-03. 

DPLIn27547. 

$3,985 

SECOND HAND 

ISEKI 10" PUMP 

New. 3 cylinder, 

40 hp Isuzu diesel. 

27480. DPLIn27480. 

$7,990 + GST 

VARIOUS 

ELECTRIC 

PUMPS SINGLE + 

3 PHASE 

elecpu9582. 

TA206433. 

$4,260 4260 

CUMMINS 66 

KVA 


generator. S19. 

DPLIn27568. 

$13,387 

SECOND HAND 

KUBOTA 

SOUTHERN 

CROSS HELICAL 

PUMP 

Kubota - Southern 

Cross Helical 

Rotor pump. 

From $4,950. 

Vel SSS420. 

TA226460. 

$5,850 + GST 

PONTOON PUMP 

ELECTRIC 

Pontoon with 

electric pump. 

xzdef19652. 

TA206427. 

$14,910 

SOUTHERN 

CROSS 

100X65-315 

PUMP SET 

with Nissan QD32 

(65hp), skid fuel 

tank, oil-temp, 

hi/lo timer 

watchdog and 

fork lift roof. 

Vel67912. TA11060. 

$13,750 

PISTON PUMP 

XF404 

With DEK 4.7 hp 

diesel, 4,000 litres 

per hour 60 metre 

head. S24. 

DPLIn27531. 

$3,300 

9 Wright Street, Sunshine Victoria 3020 | sales@veldonas.com.au 

Phone 03 9312 0888 • Fax 03 9312 0999 • Mob 0417 709 200 

FFM-DPS-5011411-E


ALL MAJOR 

BRANDS 

ALLIS CHALMERS 

Allis Chalmers New T3500 $7,500 

2800 $4000 

CASE 

Case/Cummins Equivilent 

CUMMINS 

$CALL 

NTC 300 Big Cam $12,100 

N TC 400 Rebuild $24,000 

NTC 350 Ex Fire Truck $13,750 

NTC 400 Ex Fire Truck $15,950 

NTC 444 $14,500 

NTC400 Small Cam $9,350 

N14 Various from $11,000 

N14 Mechanical $13,750 

N14 525HP Celect Plus Rebuilt 

$27,500 

N14 Celect Ex Fire Truck $13,750 

N14 Celect Plus Low Miles $16,500 

NH250 Ex Us Army as New $9,350 

L10 330HP rebuild 

$CALL 

M11 Low miles from $11,000 

M11 Mechanical Industrial $CALL 

ISM 11 Low km from $12,100 

ISM 420hp low kms $14,850 

6CT 210hp 800hrs $14,300 

6CTA 250hp $11,000 

6CTAA 275hp - Low Kms $11,000 

6CTAA 300hp $13,750 

6CTAA 300 Rebuilt 

$CALL 

6BT 160hp various specs $8,800 

6BT New 160hp construction $15,950 

6BTA 180 hp $9,350 

6BTAA 210hp -Low kms $10,450 

ISB 5.9 Industrial $9,350 

ISB 5.9 24 Valve VP44 $8,250 

ISC Low Klms from $14,850 

ISC Rebuilt 

$CALL 

ISL Good Tested From $15,950 

ISL 400hp Rebuilt 

$CALL 

ISX 500hp Rebuilt 

$CALL 

QSM11 Rebuilt 

$CALL 

PERKINS 

6.354 Naturally Aspirated $6,600 

4.108 Rebuilt $5,500 

4 Cyl Various $CALL 

4.236 Suit Rebuild $1,100 

3054 Low hours $8,25 

Australia's trusted partner for new and used diesel engines, 

quality spare parts & rebuilds 

DAF 

PACCAR 4 CYL $8,250 

PACCAR 6 CYL from $8,500 

PACCAR 6.7 CYL NEW $18,150 

430hp Mechanical $13,750 

280hp Electronic $16,500 

430hp Electronic Ex 85CF $17,600 

430hp Electronic Ex 95 XF $17,600 



CATERPILLAR 

C7 New $26,950 

C9 Various 

$CALL 

C12 Good Runners from $14,850 

C12 Low Km $17,050 

C12 Industrial $15,950 

C12 Rebuilt 

$CALL 

C13 Industrial 

$CALL 

C15 Rebuilt 

$CALL 

3116 Industrial & Auto $CALL 

3126 330hp $11,000 

3176 with jakes $CALL 

3196 Industrial $CALL 

3208 From $9,350 

3208 Rebuilt $CALL 

3208T Ex Government $11,000 

3208 Turbo Rebuilt $CALL 

3306PC Industrial Running $5,000 

3306DI Various 

$CALL 

3406B Strong motors $14,850 

3406B Powerpack 

$CALL 

3406B After cooled $14,850 

3406C Industrial spec $15,950 

3406C Truck spec $15,950 

3406E Dyno from $14,500 

3066 New - Last one $18,700 

3054 Low Hours $8,250 

TRANSFER CASES 

Kaiser $3,850 

Rockwell From $2,500 

M.A.N. from $1,650 

Oshkosh 

DEUTZ 

$CALL 

F3L912 $6,600 

F4L912 Suit Rebuild $3,300 

F5L912 Suit Rebuild $3,300 

F6L413F 

ONAN 

$CALL 

Onan 9hp Rebuilt $2,750 

SCANIA 

DSC/DS9 Various 

$CALL 

DC9 5cyl Low Kms $19,800 

DS11 360 & 380hp $13,750 

DSC12 420hp Electronic Low Ks $CALL 

DT12 470hp & 480 EGR 

$CALL 

DS14 4 Series 

$CALL 

DS16.0 580hp Low Kms $22,000 

DETROIT 

6V53 Dyno Run As New $9,350 

4.71 Low Hrs $7,700 

4.71 Turbo Low Hrs $7,150 

6.71 Inline $7,050 

6V71 Truck and industrial 

$CALL 

8V71 Low Miles $9,350 

8V71 Turbo 

$CALL 

12V71 Twin Turbo 

$CALL 

6V92TA from $10,450 

6V92TA In-chassis Rebuild $15,950 

8V92 DDEC 2 Ex F/Truck $13,750 

8V92TA Industrial as New $18,500 

8V92TA Silver near New $13,750 

8V92TA Electronic Low Miles $13,750 

Series 60 DDEC 2 

$CALL 

Series 60 12.7 500hp $13,750 

Series 60 14.0 

$CALL 

DD15 $19,250 

INTERNATIONAL 

DT466 from $8,250 

DT466 Ex Firetruck $9,350 

530E Electronic Low Kms $10,500 

IVECO 

9 Speed Transmission As new $3,850 

Tector Various from $11,000 

Tector 6 Rebuild $18,150 

Cursor 8 $13,750 

Cursor 10 $15,400 

Curso 13 

JOHN DEERE 

$18,150 

4239D Turbo power unit $8,500 

4045TF $3,000 

LISTER 

SR3 19.5 hp $3,300 

LPW4 Power Pack 40hp $4,235 

MAN 

DO824 Low Km $7,150 

DO826 Low Km $9,350 

DO836 Electronic from $9,900 

DO836 Common Rail $16,500 

D2866 $13,750 

D287 $13,750 

D2676 Common Rail $22,000 

MERCEDES 

OM364A $6,050 

OM407 Bus Specs $3,850 

OM422 V8 250hp $9,350 

OM447 Bus $11,000 

OM447 Turbo $13,750 

M904LA Bus 

$CALL 

OM902LA adblue $14,000 

OM906LA From $11,000 

OM926LA From $13,750 

OM457 Bus $17,050 

OM460 Freightliner from $13,750 

ATEGO 6 V. Low Km from $11,000 

VOLVO 

TD61F $8,500 

TD63 $9,350 

D6A Low Km $9,350 

D6B $10,450 

TD71 Low Km $9,350 

TD73 Low Km $9,350 

D7A Mechanical $9,350 

D7B Mechanical $9,900 

D7 Electric Gov. Low Km $13750 

D7C ex Low Km FM7 $13,750 

D7E Tested Units From $12,250 

FH12 D12A 

$CALL 

D12D 420hp Low km $18,700 

D12D 460hp $19,800 

D12D 500hp 

$CALL 

FM9 D9A $16,500 

D9B Low Km $18,700 

D11-460 $19,250 

D13A Low Km 

MACK 

NEW, REBUILT AND USED MOTORS. HUNDREDS OF ENGINES WRECKED FOR SPARES 

SPECIALISING IN AMERICAN AND EUROPEAN DIESELS 

$CALL 

E6-350 Two Valve $11,0000 

E7-350 Mechanical $14,950 

E7-427 V-Mac $16,000 

E7-454 V-Mac $16,225 

E7 4 Valve V-Mac $16,225 

NEW STOCK 

ARRIVING 

STEER DRIVE 

AXLES 

Assorted Axles 

AUTOMATICS 

$CALL 

World MD 3060/3560 $4,400 

World MD 3060PR/3560 From 

$3,850 

PR PTO with retarder New $8,250 

World HD 4560P PTO Spec $11,000 

2000 Series $4,400 

B400 Bus Spec $6,000 

B400R Retarder Spec $7,150 

B500R Retarder Spec $11,000 

AT545 Low Kms $2,200 

MT643 Low kms $3,300 

MT653 Low kms $3,300 

MTB653 with Retarders $6,050 

MT654 As New $6,050 

HT740 Ex US Army $8,250 

HT754 low Hours $9,350 

HT754 With Retarder $11,000 

HT750 DRD low Km $9,750 

Various adaptors available 

POWER PACKS 

Caterpillar 3516 200 hours $275,000 

Caterpillar 3126 200hp $19,250 

Caterpillar 3306 DI 

$CALL 

Caterpillar 3406B 

$CALL 

Caterpillar C13 

$CALL 

Caterpillar C15 

$CALL 

Cummins ISB 260hp low hrs $18,375 

Cummins 6BT Low Hrs $11,000 

Cummins 6CTA 250 hp $15,400 

Cummins QSC rebuilt $CALL 

Cummins QSL rebuilt $CALL 

Cummins QSX15 rebuilt $CALL 

John Deere 4329 Turbo $8,500 

Detroit 8V71 Turbo $16,500 

Detroit 12V71TT 

$CALL 

BLADDER TANKS 

New 3,000 Gal. Trailable, complete 

with tiedowns. Suit potable water 

$5,500 

New 5000 Gal Trailerable $5,500 

INDUSTRIAL 3406’S 

CUMMINS 6CTA POWER UNIT 

CUMMINS QSM11 

500 HR BC3 375HP 

NEW IND C7’S 

ALLDIESELS 

WARRANTY 

Cant find what you are looking for? Give us a call 

NEW STOCK ARRIVING DAILY. 

www.alldiesels.com | info@alldiesels.com 

Head office: 18 Jade drive Molendinar, Gold Coast QLD 4221 

call 07 5597 0077 or text 0419 515 551 

PRICES 

INCLUDE GST


AGRISON 

Call 1300 651 830 


Australia’s Number 1 Leader 

40hp CDF 

60hp CDF 

$25,990 inc GST* 

$17,990 inc GST* 

40hp CDF 

70hp CDF 

$18,990 inc GST* 

Cabin Tractor, 4WD, Front End Loader, 4ft or 6ft slasher *excludes Aircon 

$30,990 inc GST* 

Cabin Tractor, 4 in 1 bucket, 6 FT slasher, Air Con 

100hp CDF 

120hp / 140hp / 180hp CDF 

From $39,990 inc GST* 

4WD, Front End Loader, 4 in 1 bucket, Cabin with Air con, Ag Tyres 

Nationwide Delivery. Finance Available 

From $44,990 inc GST* 

4WD, 4 in 1 bucket, Front End Loader, Cabin with Air Con, Ag Tyres 

AGRISON 


Call 1300 651 830 







03 8547 8755 bill@pickman.com.au www.pickman.com.au 

5-7 Luisa Avenue, Dandenong South, VIC 3175 

MAMMUT 413HT AGRI LOADER 

3500kg capacity, Parallel lift, 9000kg operating weight 97kW (130hp) 

Cummins 6BT5.9-C 130 Diesel Engine Certified ROPS Cabin with air ride seat, 

A/C, radio & camera. 3 speed electronic power shift transmission, 40km/h 

MAX Donaldson air filer, continental Hydraulic hoses throughout vehicle. 

Hydraulic quick hitch, pilot control 3.6m Load over height, 3.05m dumping 

height. S3. TA985852. 

$64,900 Inc GST 

MAMMUT TL3000 3 TONNE TELESCOPIC WHEEL LOADER 

3000kg lifting capacity, 7300kg operating weight. Cummins 125HP Diesel 

engine, 4 speed electronic power shift transmission, 40km/h MAX. Standard 

Bobcat skid steer quick hitch, pilot control, ROPS cabin with air ride seat, A/C, 

radio and camera, synchronised extraction and lifting system. S5. TA985855. 

$56,500 Inc GST 

SUMMIT 828 2.8 TONNE WHEEL LOADER 

2019, 2800kg lifting capacity, 6800kg operating weight, 125HP FEV diesel 

motor, 2 speed powershift, hydraulic quick hitch, 4 in 1 Bucket, Pallet fork, 

A/C ROPS cabin with radio & camera. Comes with 4 in 1 bucket, pallet forks & 

spare wheel. S9. TA985903. 

$31,900 Inc GST 

SUMMIT 820 2 TONNE WHEEL LOADER 

2019, 2000kg lifting capacity, 5300kg operating weight, 3.4m dumping 

height, 4m lifting height, 102HP FEV Diesel motor, 2 speed powershift, 

hydraulic quick hitch, A/C ROPS cabin with radio & camera. Comes with 4 in 1 

bucket, pallet forks & spare wheel. S12. TA985927. 

$24,900 Inc GST 

SUMMIT H20 2 TONNE 4WD ROUGH TERRAIN FORKLIFT 

2000kg capacity, 4WD, 3 meter lift height, 2 stage mast with side shift, 50hp 

Chinese Perkins 498BT diesel motor, 2 speed powershift transmission, 2.25m 

overall height. S8. TA985871. 

$20,900 Inc GST 

SUMMIT H30 3 TONNE 4WD ROUGH TERRAIN FORKLIFT 

With 2 stage 3 meter mast, 3000kg capacity, 4WD, 3 meter lift height, 2 stage 

mast with side shift (3 stage 4.5m / 2 stage 4m mast available). 50hp Chinese 

Perkins Xinchai 498BT diesel motor, 2 speed power shift transmission. A/C 

ROPS cabin with heater, radio & reverse camera. S7. TA985867. 

$26,500 Inc GST 

MAMMUT EXPLORER 4WD ROUGH TERRAIN FORKLIFT 

2019, 3500kg capacity, on-demand 4WD, 4.5m lifting height, 59hp Japanese 

Yanmar, 4TNE98 diesel engine. 3 stage container mast with sideshift. S6. 

TA985863. 

$42,500 Inc GST 

GENERIC/UNKNOWN 1.8M 3 TONNE CLASS 3 

Forklift Slippers. S10. TA985906. 

$330 Incl GST 

HYDRAULIC FORKLIFT BUCKET 

.. S11. TA985907. 

$2,750 Inc GST 

FFM-FP-5211238-A 

2 Year Warranty - Australia Wide Delivery

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA 

Wrights Tractor Sales & Service & Wrecking 

Chalkhill Road, McLaren Vale S.A. 5171 

STOCKIST & DISTRIBUTOR FOR SA. 

Sales (08) 8323 8795 Wrecking (08) 8323 8745 Office (08) 8323 8705 

Fax: (08) 8323 9165, Mobile: 0419 820 318 

Email: wrightstractors@bigpond.com 

IN BUSINESS FOR MORE 

THAN 35 YEARS SELLING 

AUSTRALIA WIDE 

www.wrightstractors.com.au 

FOR FULL LISTING OF TRACTORS & MACHINERY, NEW PARTS & ACCESSORIES 

IMANTS ROTOK.R6.MD.R17 ROTOKNIFE Lawn aerator *price includes gst. 6630. 

TA964931. 

$9,850 INCL GST 

INGERSOLL-RAND TRAILER MOUNTED AIR COMPRESSOR 130 CFM approximately, 

diesel, serial no: SN315616, vin no: SCZP110WDYY315616, approximately 3,000 

hours indicated, Deutz motor model no: F3L 1011, serial no: #00839131, spring 

suspension, jockey wheel. 6695. TA1003292. 


FORD 5640 TRACTOR Ford 5640 Tractor, 4 wheel assist, Front End Loader no 

bucket, ROPS & Roof, front forks, 3 point linkage, 80 horsepower approximately, 

new tyres all round $28,900. MUNRO POST RAMMER HYDRAULIC OFFSET, 2 X 

AUGERS (MAY SEPARATE) $14,900. John - 08 8323 8795 / Richard - 0419 820318. 

wrightstractors@bigpond.com. 6797. TA1040838. 


JOHN DEERE 855 TRACTOR 4 X 4 FITTED WITH 72" JOHN DEERE SLASHING DECK 

John Deere 855 Tractor, John Deere 72" Slashing Deck, roll frame, 3 point linkage, 

4 wheel drive, 3 cylinder diesel, PTO hydraulics, roll frame, 24 horsepower 

approximately, original condition, approximately 600 hours indicated. * PRICE 

INCLUDES GST. John - 08 8323 8795 / Richard - 0419 820318. 



LOCKWOOD ROLLER steel drum, 2 cylinder unleaded, fitted with Honda GX630 

petrol mower, drum width 1,100mm approximately *price includes gst. 6672. 

TA998723. 


DITCH WITCH 4010DD WHEELED TRENCHER 3 cylinder diesel, serial no: 6B2114, 

approximately 3,853 hours indicated, fitted with Deutz air cool diesel, 4 speed 

transmission, push blade, Model A512 Trencher, serial no: 2B0042, tyres 31 x 

15.5-15, excellent condition. 6691. TA1002653. $29,450 INCL GST 

TRACTORS COMING IN 

MASSEY FERGUSON 4235, 4X4, CAB, FRONT END 

LOADER 

NEW HOLLAND T4050 

JOHN DEERE 6810, CAB, FRONT END LOADER 

CASE 1394, CAB, 4X4 

KUBOTA L5030D, 4X4, CAB, FRONT END LOADER 

DITCH WITCH 8020 CHAIN TRENCHER 4 cylinder diesel, serial no: 5J0190, 

approximately 1,500 hours showing, fitted with back fill blade, auxillary hydraulics, 

counter weights, open cabin, pneumatic tyres, ROPS, 80 horsepower 

approximately, John Deere motor, 4 wheel steer, front cable reel holder, ready to 

work * price includes gst. 6727. TA1017219. 


MASSEY FERGUSON 135 TRACTOR 2 wheel drive, approximately 6,400 hours 

indicated, roll frame & roof, 45 horsepower approximately * price includes gst. 

6724. TA1015626. $10,450 INCL GST 

LEYLAND 245 TRACTOR 2 wheel drive, 3 cylinder Perkins engine, power take off, 3 

point linkage, original all round, approximately 45 horsepower * price includes gst. 

John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 

6713. TA1006347. $9,850 INC GST 

KUBOTA B2100 TRACTOR 4 wheel drive, roll frame/roof, approximately 21 

horsepower, low hours indicated, ex School * price includes gst. John - 08 8323 

8795, Richard - 0419 820318, wrightstractors@bigpond.com. 6656. TA992403. 


MANITOU BT420 TELEHANDLER BUGGISCOPIC 4 cylinder diesel, serial no: 144412, 

engine no: KF805068, chasis no: 1144412, fitted with Perkins engine, 

approximately 1,082 hours indicated, fully, cab, extendable boom, fork tynes, multi 

purpose bucket, work lights, ex Govt, still has 5 year test valid, * price includes gst. 

6717. TA1007961. $34,450 INCL GST 

ALSO FORD NAPIER 

20 PLATE $7,950, 

JOHN DEERE 17 

PLATE $8,450, 

GIBBINS RAWLINGS 

24 PLATE $15,850 

IHC DISC CULTIVATOR 20 PLATE WRIGHTS TRACTORS PHONE 08 8323 8795 

wheeled hydraulic offset trailing disc cultivator, all scalloped discs, as new, been 

shedded. *Price includes gst. 6326. TA843867. 


AMAZONE KE 253 - 170 POWER HARROW WRIGHTS TRACTORS PHONE 08 8323 

8795 170 power harrow with tooth packer roller, working width 2.5 metres, little 

use. *Price includes GST. 6593. TA948994. 


FITTING LOADER 

CASE IH JX70U TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel 

drive, powered by Iveco 4 cylinder diesel engine, air conditioning, enclosed cab, 

tow bar, 3 point linkage, power take off, AUX hydraulics, 4 speed high/low, approx. 

74hp, immaculate condition. 6337. TA847556. 


GOLDONI TRACTOR 4 wheel drive, low gravity, 55 horsepower approximately, tyres 

excellent all round, runs & starts beautifully. 6752. TA1036529. $9,500 INCL GST 

HOWARD EHD 7' SLASHER seal & blades, twin depth wheels, galvanised, excellent 

condition, ready to go * price includes gst. 6645. TA982110. $7,950 INC GST 

ALSO IN STOCK 

JOHN DEERE 3320, 4WD, 

APPROX 3,427HRS INDICATED, 

CAB, 4CYL DIESEL $29,950 

JOHN DEERE 5065M TRACTOR year approx. 2011, 4 wheel drive, diesel, serial no: 

1LV5065MPBJ3472255, engine no: 347255, approximately 4,493 hours indicated, 3 

point linkage, air conditioning, enclosed cab, radio/cd, radio UHF/VHF, ROPS 

(FRONT WEIGHTS NOT INCLUDED), approximately 91 horsepower * PRICE INCLUDES 

GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 

6754. TA1037949. $44,000 INCL GST 

CASE IH MAXXUM 100 TRACTOR 4 wheel drive, approximately 5,900 hours 

indicated, ex Council, 4 cylinder turbo diesel, transmission 16 speed Hi/Lo, no front 

weights, 101 horsepower approximately, 3 point linkage, immaculate. 6628. 

TA964798. 


SICMA COSMAG ROTARY HOE Plus many other rotary hoes in stock. S1820. 

TA949345. 


JOHN DEERE 2140 TRACTOR WITH FRONT END LOADER John Deere 2140 Tractor, 

4 wheel drive, Front End Loader, low hours, 4 new tyres, 3 point linkage, 

approximately 85 horsepower, original & clean. 6820. TA1046983. 


KEYLESS ELECTRIC CODE 

BOBCAT 328G EXCAVATOR (rubber tracked), 3 cylinder diesel, serial no: 

284211534, engine no: 04N0777, approximately 2,730 hours indicated, quick 

release bucket, 4 post canopy, swivel boom, levelling blade, hammer piping, 

950mm Mud Bucket, excellent condition, approximately 3.5 tonne. 6751. 

TA1034628. 


MASSEY FERGUSON 240 TRACTOR WITH FEL 2 wheel drive, Front End Loader, roll 

frame, 3 point linkage, full width bucket double acting all round, approximately 

3,100 hours indicated, vin no: 1004, engine no: 261165, 8 speed manual, 45 

horsepower approximately. 6761. TA1039017. 


CATERPILLAR T9B Chain Trencher, suit Cat Skid Steer or Track Skid Steer, little 

use * price includes gst. John - 08 8323 8795, Richard - 0419 820318, 



CONNOR SHEA SEEDERS 14 ROW disc super seeder trailing $10,500, 14 row disc 

super seeder linkage $8,950. Price includes GST. John - 08 8323 8795, Richard - 

0419 820318. S2025. TA1029395. POA 

JOHN DEERE 5525 TRACTOR year approx. 2010, 4 wheel drive, serial no: 

LV5525R453794, engine no: PE4045T716512, approximately 6,127 hours 

indicated, ex Council, enclosed cab, 12 x 11 power/reverser transmission, 2 rear 

remotes, 4 cylinder diesel, 540 & 540E PTO, turf tyres Rear 16.9-R24 Front 

9.5-R24, rotating beacon, FRONT WEIGHTS NOT INCLUDED, approximately 65 

horsepower. 6758. TA1038825. 


COMING IN 

VERMEER V3550A TRENCHER, DIESEL, LOW HOURS 

JOHN DEERE 4310, 4WD, FRONT END LOADER, AIR CON CAB, LOW HOURS 

FORD 5610, 4WD, FRONT END LOADER 

CASE JX100U, 4WD, FRONT END LOADER TO BE FITTED 

KUBOTA 9540, 4WD, ROPS & ROOF, FRONT END LOADER TO BE FITTED 

FIAT 6066, 4WD, FRONT END LOADER 

SAME DORADO, 4WD, CAB 

CASE INTER 385, 2WD 

FIAT 4566, 2WD 

CASE JX70U, 4WD, CAB, LOADER TO BE FITTED 

LINDE FORKLIFT WRIGHTS TRACTORS PHONE 08 8323 8795 Linde Forklift, 4.5 

tonne, maximum fork height 14ft. *price includes gst. John - 08 8323 8795 / 

Richard - 0419 820318. wrightstractors@bigpond.com. 6309. TA837362. 

$14,400 INC GST 

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA 

FFM-FP-5011376-B 

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

Powered by 

www.TradeFarmMachinery.com.au 

* Based on stock items for sale as at March 2020

4/3/20, 2:48 pm 

Page 1 of 1 

4/3/20, 2:48 pm 

Page 1 of 1 

Find new and used Tractors for sale with Farms & Farm Machinery 

magazine 

Page 1 of 188 (1,875 results) 

Sort by Premium Ads 


magazine 



Tractors / Tractors / 0-40hp 

RefCode: TA978637 Class: 0-40hp Drive Type: 4WD 

FEL: YES Rated Engine Power - hp: 28 

4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 

hours indicated, with books, approximately 28 horsepower, AS NEW *price 

includes gst 

Mclaren Vale, SA 

list 

map 






includes gst 


list 

map 

$24,750 $160,000 

$199,980 $50,000 

CASE IH 695XL. 70hp, Cabin, Challenge 349E 2016 GVM Mako. Spra coupe, 2vm boom, 2018 New Holland T7-260. 220hp, L4500 2017 Kioti RX8030SP. ROPS, Loader & 4in1, 

front end loader + more • NSW 0429 467 147 1500L tank. • NSW 0488 442 372 

loader + much more • VIC 0402 851 544 had only light work • QLD 0437 113 771 




4x4s now for sale! 

RESEARCH • COMPARE • BUY • SELL 

AUSTRALIA’S #1 

FARM MACHINERY MARKETPLACE * 

BUY 

More than 40,000 tractors, 

spreaders, harvesters, hay tools, 

feeders, sprayers, trailers, and 

attachments, and other parts and 

accessories currently listed for sale 

SELL 

Unlimited 

stock listings on 


for just 

$360 per month 

SPRAYERS 


Issue 382 > $7.95 > On sale 27/02/20 


>> TESTED 

Four High, Two Tonne 

Tobroco Giant 6004 Loader 

Off the Chain 

Hustler’s Chainless LX104 Bale Feeder 

Fully Charged 

Ram 1500 Laramie V6 Ecodiesel 

BAUER TRADER MEDIA 

SEARCH 

NEW AND USED TRACTORS FOR SALE IN 

AUSTRALIA BAUER TRADER MEDIA 

NEXT 

SEARCH 


AUSTRALIA 

GET ALERTS 

CASE IH MAXXFARM 25 TRACTOR NEXT 

$19,750 

GET ALERTS 

CASE IH MAXXFARM 25 TRACTOR 

$19,750 

! CALL 08 7007 6847 

,!3BD0A6-aaejdg!:K;N 

Czech 

Serafin Machinery brings Czech manufacturer 

Farmet’s range of deep and disc cultivators to 

the local market >> Page 14 

44,480+ 

MATE 

8,340+ 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

$22,000


MAKING YOUR LIFE A BREEZE 

smallaire.com.au 

Manufacturers of Air Movement Products since 1974 

Grain drying systems 

Grain Aeration Systems 

High Pressure Blowers 

Stirring/Wall & Roof Fans 

Airseeder components 

Commercial/Domestic AC systems 

Ph: (03) 5382 5688 

170 Golf Course Rd, Horsham VIC 

Ph: 0418 997 646 4/70 Strickland Street, South Perth WA 

 

FFM-SH-5032334-TS-361 

SECONDHAND 

MACHINES IN STOCK 

08 8821 1188 

FARM MACHINERY FOR ALL SEASONS 

CONTACT 

Kris McCracken 0418 824 054 

Phillip Rowntree 0428 859 027 

Gary Kotz 0427 868 191 

Colin Adams 0429 941 331 

Alex East 0439 881 355 

GLEANER S98 

2017 Build 

579 Engine Hours, 

377 Sep Hours, 

9.8L Engine, 

471HP, 

Titan Terminal, tidy 

maintained 

machine. C71364. TA970992. 

$385,000 Inc GST 

NEW HOLLAND 

CR9090 

2013, 6 Cyl, FPT Cursor, 

Turbo Diesel, 571Hp Max, 

1000L diesel, 120L Adblue. 

Excellent condition. 

102542. TA872139. 

$302,500 

MILLER NITRO 5333 

2012, Boomspray, 6,100LT 

Tank, 2,719.8 Hours, Cummins 

QSC 8.3Lt Tier 3, 305Hp, 

520/85R38 Tyres (60%), Scud 

pump, Granni Mix. 102470. 

21.14049. TA784678. 

$253,000 

CLAAS LEXION 750 

2013, HD feeder 

housing, C13 Cat 

engine, 3D cleaning, 

11,500L Grain Tank, 

TM6 Sieves 

LGK23034. TA977681. 

$264,000 Inc GST 

FLEXI COIL 2340 AIR 

SEEDER CART 

Dual fan, 

triker, Flexicoil 

electronic controller, 

ground drive, 

variable rate 

102586. TA1024980. 

$48,400 Inc GST 

CASE IH MAGNUM 315 

2012, 312HP 6cyl 8.7L 

Power Shift 

Transmission 

PTO 540/1000 rpm 

Trimble steering. 102633. TA1029793. 

$203,000 Inc GST 


Engine Hours 1600 

Separator Hours 1170 

6 cylinders 653 hp 

14,500 Grain Tank 

Rotor Vane update 

Centre Point Steering 

Includes Macdon FD75 45' front. 

611961002. TA1015611. 

$506,000 Inc GST 

AMAZONE ZA-M ULTRA 

Good Condition 

3 Point Linkage mounted 

4200L. 102635. TA1036530. 

$27,500 

CHALLENGER MT775E 

2800 Hours 

25" Tracks 

3M Centres 

3PL & PTO 

Steer Ready 

UHF/Radio/CD. 102641. 

TA1042488. 

$286,000 

USED HEADERS: 

Case 8230 & Macdon 2152 Rigid Draper 40’ Front .. $363,000 

John Deere S660 & John Deere 635D Front ............. $275,000 

Claas Lexion 780TT ................................................. $429,000 

2013 New Holland CR9090 Combine ....................... $357,000 

Claas Lexion 780TT & Macdon D65 40’ Draper Front ...$495,000 

2010 Claas 580R Combine ...................................... $132,000 

USED FRONTS: 

John Deere 615 Pick Up Front.................................... $35,200 

Claas 450 Swath Up Front.......................................... $39,600 

New Holland 880CF 880CF-40 ................................... $66,000 

Agco 800 Series flex front .......................................... $11,000 

Macdon adaptor to suit Gleaner .........................Make an offer 

USED BOOMSPRAYS: 

2012 Miller Nitro 5355 ............................................. $253,000 

2014 Miller Nitro 5333 ............................................. $220,000 

Hardi 6542 Commander ...........................................Coming in 

Hardi 7036i Commander ............................................ $49,500 

PRICES ARE INC GST CONDITIONS APPLY 

Website: www.gjeast.com.au | Email: sales@gjeast.com.au | 4-8 Goldsworthy Street - Kadina 

FFM-HH-5012311-C


14 Joyce Ave, Moree NSW Ph: (02) 6752 2277 Michael Watt 0428 657 053 

40 Boundary Rd, Goondiwindi QLD Ph: (07) 4677 8100 Michael Watt 0428 657 053 

318 Taylor St, Wilsonton. Toowoomba QLD Ph: (07) 4634 3911 

www.blacktrucksales.com.au 

JOHN DEERE 8260R 

2013, 260HP, IVT Transmission, front 3pt 

linkage, Quick Hitch Rear, Front Suspension, 

Steer Ready (no receiver), 480/70 R34 front 

tyres, Dual 480/80 R50 Rears. Good Condition, 

located Dalby, call Michael 0428 100 164. 

706896. TA1038848. 

$165,000 

E Z TECH 30 TONNE 

Capacity -30 tonne, Rollover tarp, 18 inch 

discharge auger, 14 ft long discharge auger, 

1000 pto, 30.5R32 Tyres. 

LOCATED TOOWOOMBA 

eztech30. TA988728. 

$79,900 


2016, 1207 Engine Hours, 961 Rotor Hours, 12.9L Iveco Engine, 

530hp, 1300L Fuel Tank, 14500L Grain Tank, Folding Unload Auger 

with extension, 4 speed hydrostatic transmission, Intellisteer 

Guidance with Intelliview 4 screen and 372 receiver unlocked to RTK 

(no radio), Straw Chopper, DFR, Reverse Camera and Tank Camera, 

900/70R32 Front Tyres, 750/65R26 Rear Tyres 80%, 40ft Mac Don 

Front, One owner, Excellent Condition. 

Located in Goondiwindi. Please call Dom 0400582092 

706626. TA992274. 

$480,000 

HORSCH JOKER 6HD SPEED TILLER (400 AC) 

Speed Tiller Demo unit, 6m width, Heavy Duty, 

up to 200mm working depth, Minimum 220hp, 

62cm Discs, Roll Pack Packer, Under 3.5m 

Transport Width. Located in Goondiwindi. 

500335. TA993920. 

$90,000 

XCMG LW400K FEL COBRA and XUZHOU 

Comes with bucket pallet forks. Located Moree 

NSW 2400. 500117. TA999357. 

$100,000 

MILLER NITRO N2XP 

36m boom, 6500hrs, Cummins Engine, Red Dot 

Air conditioner, Triplet Nozzle Bodies, Auto 

Farm Steering with section control. Located in 

Goondiwindi please call Dom *0400582092* for 

more information. 7070561. TA1043044. 

$59,500 


2010 model, 1800 Engine Hours, 1250 Rotor Hours, 10.9L Iveco 

Engine, 1000L Fuel Tank, 12333L Grain Tank, Auger Extension, 4 

speed hydrostatic transmission, Auto Steer ready with Intelliview 

monitor, Straw chopper, Automatic Stone Protection, Cameras, 

900/60R32 Front Tyres, 600/65R28 Front Tyres 60%, 42 foot Honey 

Bee Front, Been through the workshop with a massive list of work 

been completed including shoe, sieves, chains, belts, service and 

much more. Located in Goondiwindi, Call 0746778100. 700078. 

TA870433. 

$250,000 

NORSEMAN 12 ROW 60 ft precision planter 

2016, Norseman 18mtr 12 row precision 

planter, water injection, CCS controller, 

diffusers and hydradrive. 

Location Goondiwindi. 500281. TA1019319. 

$138,000 

JOHN DEERE CTS 

Combine, Good condition, always kept 

undercover. 4885 engine hours, 3090 seperator 

hours. John deer 930 30ft tin front & comb 

trailer. Located Dalby, Call Michael 0428 100 

164. 706928. TA1043046. 

$33,000 

GLEANER R65 

2009, AGCO 8.4L Engine, 1839 Hours, 570L Fuel Tank, 

10570L Grain Tank, 4 speed Hydrostatic Transmission, 

AGCO Global Technologies display and task manager, 

Straw Chopper, moister and yield meter, 30.5-32 Front 

tyres 40%, 16.9-24 Rear tyres 25%. Located in 

Goondiwindi, Call Dom 0400 582 092 or 4677 8100. 

R65HR62174. TA977701. 

$88,000 

CROPLANDS MAKO 400HC 

2016, Excellent condition Mako 400Hc packed 

with extras, comes with 3m extension kit, 27m 

boom tip extension, inline boom section filters, 

Trimble receiver, FMX display & Field IQ. Would 

suite new buyer. MK16400HC1035. TA938676. 

$165,000 

NEW HOLLAND T8.390 

2015, 335HP, Powershift transmission, Quick 

Hitch, PTO, Guidance Ready, Good Rubber at 

50%, 480/80R50 rear Tyres with duals, 

3697hrs. Located Goondiwindi 0746778100. 

706129.. TA1021516. 

$165,000 

CROPLANDS RG1300B 

Approximately 3250hrs, 6 cylinder Twin Turbo 340hp 

Engine, 5000L Tank, 36m Boom, 3 inch fill pump, Raven 

XT Height Control, Stainless Boom Line, 60L Chemical 

Hopper, Trimble XCN2050 Autopilot Steering system 

Unlocked to RTK with a 900mhz Trimble Radio. Located 

in Goondiwindi. Call 0400582092. 7068881. TA1038844. 

$297,000 

NEW HOLLAND 840CD 

NEW 45 ft New Holland draper front. 

Suit all CR series Combines. 

500132. TA1021518. 

$80,000 


2011, 42ft Honey Bee Front, 12.9L FPT Engine, 523hp, 

Straw Chopper, Intelliview 4 screen, Guidance Ready, 

Twin Rotor, 4 speed hydrostatic Transmission, 1709 

Rotor Hours, 2479 Engine Hours, in Excellent Condition. 

Located in Goondiwindi, Call 0400 582 092. 706627. 

TA1021519. 

$258,500 

GASON 1830RT2 AIR SEEDERS/AIR CARTS 

2 Bin Auger Ground, drive4 outlets, 

Located Moree NSW. 

Call 02 6752 2277 

915062. TA1021520. 

$33,000 

You can depend on Black Truck & Ag for a good deal, a suitable finance package and service support. 

FFM-FP-5011765-B 

2.99% on all used combines, Terms & Conditions apply. Subject to credit approval. Finance provided by CNH Industrial Capital Australia Pty Ltd AFS License No.286664.


SAMMUT 

AGRICULTURAL MACHINERY 

All the latest gear and greatest innovations 

Phone: (02) 4579 6511 Mobile: 0414 423 680 

Fax: (02) 4579 6522 Email: sales@sammut.com.au 

67 Joshua Road, Freemans Reach NSW 2756 

TOSCANO MULCHER 

H/D construction 

Double or single side linkage 

Optional hydraulic side shift 

Sizes from 1.5 to 4mtr 

S359. TA1025453. 

Price from $5,000 + GST 

SAMMUT TRUCK TRAYS 

H/D Australian made 

3mm or 5mm floor 

Custom build 

Chassis modifications 

New and used trucks available. S360. TA1025472. 

PRICE FROM $8,000 + GST 

SAMMUT HARDOX TIPPER BODIES 

H/D build. One piece sides, 2 way gate 

Optional well hoist or twin under body. Optional drop sides 

Custom build. Colour of choice 

Sand blasted and finished in 2-pac 

New and Used trucks available. S362. TA1025485. 

From $25,000 + GST 

UNITED IMPLEMENTS BOX GRADER 

Made in USA 

Heavy duty build 

Hydraulic lift wheels 

Hydraulic angle adjustment 

1800mm to 3600mm. S363. TA1025493. 


SAMMUT GEARMASTER TURF MOWER 


Full gear drive, Stainless deck 

75 HP gearboxes, 3pl or trailing 

Sizes from 1.5 mtr to 12mtr. S364. TA1025498. 


SAMMUT MILL MUD SPREADERS 


Full hydraulic drive, Single or 3 row 

Front feed, Single or double axle 

Optional rear spinners 

Sizes from 8m3 to 30m3. S365. TA1025500. 


SAMMUT ORCHARD / VINEYARD SPREADER 

H/D Australian build 

Front or rear delivery. Sizes from 2m3 to 18m3 

Optional telescopic conveyor, Optional end rotor or end spinner 

Custom built to suit your requirements. S366. TA1025523. 


SAMMUT SPREADERS 


Full hydraulic drive 

We can custom build. Optional front feed 

Optional side delivery. Chain or belt floor 

Sizes from 2m3 to 30 m3. S367. TA1025524. 


FIMAKS VERTICAL FEED MIXERS 

Hardened bin and floor. H/D Comer Italian gearboxes 

Sizes from 3m3 to 30m3. Scales, In cab controls 

Optional folding conveyor with optional length 

Reduction box. S371. TA1025537. 

From $25,000 + GST 

TOSCANO STONE BURIER 

Extra heavy duty 

Hydraulic lift roller 

Gear drive 

Anti-pan blades 

2200mm to 3200mm. S369. TA1025532. 


TOSCANO SPEED DISC 

Heavy duty 

Hydraulic lift crumble roller 

560mm discs 

3pl and trailing 

2.5 mtr to 6mtr (trailing ). S368. TA1025525. 


For more info please visit us at www.sammut.com.au 

FIMAKS MUCK SPREADERS 

From 5 tonne to 30 tonne 

Heavy Duty conveyor chain, Slurry door, In cab controls 

Twin vertical beaters with bottom spinner 

Suitable for all your hard to spread products etc 

Wet cow manure, mulch, green waste etc. S373. TA1025543. 

From $25,000 + GST 

FFM-FP-5190448-A

Agrolead Has The Best Drill For The Money! 

No One Else Even Comes Close! 

2.5M 

5M 

3M 

6M 

6-35CBM FEED MIXERS FROM 

$29,990 +GST 

4M 

LINA TWIN DISC 

SEEDERS PRICES 

AS LOW AS 

$19,990–$38,990 +GST 

Speed Discs 

FROM $11,999 +GST 

MAXXIMUS FARM EQUIPMENT AUSTRALIA 

maxximusholdings@gmail.com | www.maxximusholdings.com.au 

CALL US TODAY! 

0413 762 085 

COLAC | WARRNAMBOOL 

357 Princes Highway, Colac West, Vic, 3250 

Colac 03 5231 6322 Warrnambool 03 5561 1733 

KVERNELAND OPTIMA 12 row planter, 20" spacings, 

end tow, curly tine machine. Good condition. 8087. 

TA1027561. $35,000 

CLAAS ARION 430 Air cab, 16 x 16, power shuttle 

40kph, 4 speed pto, loader, bucket, forks, 3rd 

function. Front guards. Serviced 4700 hours. 

A2103694. TA1036009. $62,000 

AMAZONE ZAM 3000 ULTRA 3000 LTR twin disc 

spreader with cover, controller, 24 - 48 mt discs. 

ZAM0080758. TA1026701. $16,000 

LELY RPC445 Lely Welger RPC445 Tornado round 

baler wrapper combo, 2015 model, only 15407 

bales, excellent condition, 6 x 4 bale size. Complete 

with knives. 4895.50.627. TA1024973. $93,500 

RAPID SPRAY 600L 600x 6m, 3pl, pto drive, 600lt 

tank, 6m boom spray, c/w hose reel & gun. As new. 

11061128. TA1024931. $4,900 

HARDI NAVIGATOR 4000 x 24mt boom, 3 section 

control, granni pot, fast filler, 2015 model. HC1714. 

TA961496. $39,000 

KUHN 5168 Twin auger with new blades 20 cu/ms 

capacity, front discharge conveyor. HW329. 

TA1001950. $45,000 

BALDAN CALDOW GRASSLINER drill, 13 run, trailed 

tyne drill, dual box. 00161. TA1027564. $10,000 

HORWOOD BAGSHAW W/ JD 1910 CART 40ft, 

10"spacing, 48 tines, hyd parallel sys, dual chute, 

75/12 bushell, auger, vari rate, ground drive. 18021. 

TA948457. $143,000 

AMAZONE CATROS 4 MTR Multi disc 4 mtr, crumbler 

roller with PJ Green's air seeder on the back. 

HC1923. TA1026681. $24,000 

CLAAS AND KUHN MOWERS Great S/H Selection, 

3.0, 3.2 & 3.4m, 3PL Mowers, All W/Shop Checked, 

VG Cond. HMVARIOUS. TA160458. FROM $6,900 

NEW HOLLAND T 7030 cab tractor, c/w 18x6 power 

command trans, front weights, 40km. Z7BG03707. 

TA1027555. $71,500 

AMAZONE CIRRUS 6003-2C 6M disc seeder c/w 

seed & fertiliser, green drill 500lt mounted on back 

with hoses & deflector plates, speed discs recently 

replaced. HW CONWILSON. TA1038980. $70,000 

KEMPER 460S maize front. Fits Claas Jaguar. Good 

condition. HC1976. TA1038842. $39,000 

CASE MAGNUM 285 MX285 Good condition, rear 

duals 486/80/1250. 18 x 6 power shift. Quad 

remotes. JAZ140478. TA1009076. $59,500 

SCOTT O’HANLON 0429 316 322 

GREG HARRINGTON 0438 786 035 

JAMIE DUNN 0427 469 400 

TREVOR BANT 0459 469 456 

www.claasharvestcentrecolac.com.au 

FFM-HH-5166595-B

Nakayama Feeder Crusher. 

9ft x 30 inch, unused • QLD 0427 775 466 

Kue Ken 48x36 Jaw Crusher. On stand with feeder & Skid based Crushing Plant 42x27. Brown Lenox Jaw, 

scapler, refurbished. • QLD 0427 775 466 

1600 Kawasaki Gyro, Allis screen • QLD 0427 775 466 

Powered by 

ISSUE 323 

Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment 

Supply Chain 

smarts 

Coles Group continues with its supply chain digital 

transformation to enable Smarter Selling strategy. 

Full story at TradePlantEquipment.com.au 

$10,000 + GST 

$500,000 + GST 

$875,000 + GST 

23,920+ items for sale in print & online



INDUSTRIAL EQUIPMENT MARKETPLACE * 

BUY 

More than 23,933 used and 

dealer demo forklifts, cranes, 

generators, compressors, pumps, 

engines, metal fabrication 

machines and lots more for sale 

SELL 

Unlimited stock listings across 

the Bauer Media Group 

Transport & Machinery 

Classifieds Network 

just $360 per month 

www.TradePlantEquipment.com.au 



37 Cornelia Creek Road 

Echuca 3564 

Tel: (03) 5482 2788 

A/H Damien Trencher 0428 822 788 

92 Karook St 

Cobram 3644 

Tel: (03) 5871 3333 

A/H Mario Mete 0438 389 916 

NEW HOLLAND RB180 SUPER FEED big wheels, done 

20,900 bales, been through workshop, neat tidy baler 

located at Cobram dealership 0358713333, 6ft x 4ft 

bales, variable chamber. S438. TA1034386. $41,800 

NEW HOLLAND T4050F Orchard/vineyard tractor, 95Hp, 

4688 hours, good condition, located in Cobram. S441. 

TA1036826. $36,300 

NEW HOLLAND BR750A CROP CUTTER 38200 Bales, 

knives, dood working condition, in Cobram yard. S360. 

TA933442. $22,000 

ENFORCER M SERIES 35 3.5T, 4WD diesel forklift, 50.1 

engine hrs. Rough terrain forklift, 2018 model. 3500kg lift 

capacity, 3 stage mast, side shift. Comfort-class 

suspension seat, scales. At Shepparton dealership. S413. 

TA1002745. $49,500 

NEW HOLLAND CR8090 CR 2012, New Holland CR8090 

Smarttrax, 1940e & 1264r Hrs, optispread chopper, PSD, 

class 8, Macdon D60 40ft draper front, located at 

Shepparton. FINANCE RATE OFFER from 1.99% 

*conditions apply. S352. TA930781. $396,000 

NEW HOLLAND DURASWATH 25FT Draper front for self 

propelled mower, twin knives, 25ft or 7.6 meter cut, 

Leith trailer with it. At Echuca dealership 03 5482 2788. 

S374. TA953475. $79,200 

NEW HOLLAND TSA125 2004, Used Cab Tractor, 5336 

eng hrs, 2 rear remotes, front suspension, 50 km trans, 

420/70R28 front + 520/70R38 rear tyres. Located 

Shepparton. S414. TA1007877. $42,350 

NEW HOLLAND CR9080 2009, 83C 40ft draper front 

(Macdon) on trailer, 2724e & 1971r hrs, 2009, twin 22" 

rotors, MAV chopper, singles. FINANCE RATE OFFER from 

1.99% *conditions apply. S353. TA930864. $308,000 

For our full list of available equipment please visit: 

http://echuca-rural.tradefarmmachinery.com.au/ 

WEBSITE UPDATED DAILY http://www.echucarural.com.au 

FFM-HH-5011691-A 

www.massaromotors.com.au 

(03) 5191 9369 

RAY MASSARO 

0417 887 718 

CHALLENGER MT525B 

Techstar 

Challenger MT258B 

Techstar Tractor 

Caterpillar 6.0L 6-cyl 

Diesel 

118hp 

CVT Drive 

4WD. S411. TA1031139. 

$39,990 

KUBOTA B7500 

21hp Diesel 

HST Transmission 

60" Deck 

Drives Well. S331. 

TA1017884. 

$9,990 

NEW HOLLAND T6010 

4WD TRACTOR AND 

FRONT END LOADER 

Low hours, One owner 

since new. Just arrived 

in stock. As new inside 

and out. S445. TA1043189. 

$49,990 Inc GST 

FIAT 450 

45 horsepower 


8 forward 2 reverse 

transmission. S275. 

TA991409. 

$8,990 

KUBOTA LM2400 LIGHTWEIGHT 

FAIRWAY MOWER 

A light-weight five unit fairway 

mower that embodies all the 

qualities that Baroness products are 

best known for quality of cut, 

durability, low whole lift service 

costs and long service life. The 

Finest Reel cutter and Bedknife 

produced in this industry. Low 

centre of gravities provides mowing 

stabilities. On-board backlapping. 

S444. TA1043187. 

$28,000 Inc GST 

KUBOTA ZERO TURN 

MOWER ZD1221 

72 Deck 

Diesel Engine 29.1HP 

Hydraulic deck lift 

Padded Suspension 

Seat. S452. TA1046670. 

$24,990 

CASE 1190 

Case 1190 Tractor 

Fully Enclosed Cab 

2.7L 3-cyl diesel 

Hydrostatic Power 

Steering. S368. TA1027176. 

$12,000 

NEW HOLLAND G6030 

4WD Hydrostatic diesel, 

Power Steering 

4 Post roof, 5 foot Trimax 155 

flail mulcher, Diff lock, 2 range 

Hydrostatic. Excellent large 

area mower. We have 7 ex 

council machines in stock. 

Perfect for Spring!!!. S430. 

TA1039330. 

$10,990 

KUBOTA MX5200HD 

52hp FEL, 3 Range 

Hydrostatic, 4WD, Skid 

Hitch loader attachment. 

S431. TA1039331. 

$42,000 

Large range of New & Used Machinery in Stock 

Located at 2-6 BRIDLE ROAD, MORWELL VIC 3840 

FFM-HH-5006851-C


WANTED CONNOR SHEA 

SEEDERS, ANY CONDITION. 

KRONE 90” 3PL ROTARY HOE (H. 

DUTY). S1917. TA1046902. POA 

SAME FRUTTETO 1985, with a/c 

forklift 3PL 85hp. S1717. TA942864. POA 

SHEARER GEHL 1460 ROUND BALER 

.. S1899. TA1029444. POA 

CLAAS CONSTANCE SMALL SQUARE 

BALER .. S1921. TA1046904. POA 

FORD NEW HOLLAND 4635 A/C, 3PL, 

90% tyres. S1618. TA907655. POA 

INTERNATIONAL 16 DISC 3PL .. S1911. 

TA1046892. POA 

INTERNATIONAL 454 DIESEL TRACTOR 

WITH 3PL .. S1909. TA1046890. POA 

KUBOTA M7500 Diesel, 3PL, power 

steering, 78hp. S1805. TA998760. POA 

INTERNATIONAL ROTARY HAY RAKE 

PTO 3PL .. S1897. TA1029441. POA 

HARRINGTON CATTLE CRUSH 

(BEEFMASTER). TA954517. POA 

2.5 TON MARSHALL TWIN SPIN BELT 

SPREADER. POA 

WOOD CHIPPER (TELCO) PERKINS 

MOTOR. S1914. TA1046901. POA 

HARDI 400LTR BOOMSPRAY 3PL .. S1870. 

TA1025089. POA 

CONNOR SHEA 19 RUN 8000 Coil tyne 

direct seeder with coulters trailing. S1905. 

TA1042594. POA 

JETSTREAM 5 IN 1 GROUPER .. S1923. 

TA1047026. POA 

5’ CONNOR SHEA CHISEL SEEDER 3PL 

(VERY GOOD) S1913. TA1046899. POA 

HYDRAULIC TIPPING TRAILER 9’ X 6’ 

.. S1898. TA1029443. POA 

NEW HOLLAND 352 HAMMERMILL 

MIXER .. S1919. TA1046903. POA 

NEW HOLLAND 2A SILAGE CART. 

TA954522. POA 

AITCHISON 7’ 3PL DIRECT SEEDER .. 

S1908. TA1042597. POA 

DUNCAN 734 TRIPPLE DISC SEEDER 

WITH PRESS WHEELS, 23run .. S1922. 

TA1047025. POA 

MCKAY DOUBLE GROUPER WITH 

HONDA MOTOR. POA 

7' 3PL AERATOR. POA 

CRUMP KURRAJONG SPREADERS 1 

and 2 Ton. TA930948. POA 

10’ PL BERENDS SLASHER With Heavy 

Boxes & Depth Wheels. S1902. 

TA1042590. POA 

3PL ROCK RAKES 6 TO 10 FT 

WINDROWS, RAKES & LEVELS, 

6’, 8’ & 10’. TA307516. POA 

WALLACE 5 TYNE SUBSOIL PLOUGH 

WITH COULTERS. TA954520. POA 

BERENDS 8’ GRADER BLADE 3PL .. S1876. 

TA1025095. POA 

ROTATING WEED WIPERS 9’6” COVER 

SUIT QUAD, UTE OR TRACTOR. 

TA449307. POA 

CHRISGROW 8’ 3PL SLASHER .. S1886. 

TA1025099. POA 

AGRO-SEEDER 21 RUN COIL TYNE 

BAKER BOOT DIRECT SEEDER. 

S1591. TA883299. POA 

COMBINE AND SEEDERS 

Shea 5' & 7', 3PL disc seeder 

Seedling planter (Ellis) rotary 

6' & 8' roller seeders 

9' Connor Shea disc seeder trail 

C seeders 

Ellis and Sons 4 row seeders 

Inter 24 run combine 

MF 55 12 run combine 

7' Ezy-Sow seeders 3PL $2,900 

HAY EQUIPMENT 

Small square balers: NH 317, NH 275, NH 69, MF 12. 

Claas 

Mower con - in stock 

MF 3PL roller bar 

KINGPACKER ROLLERS 8’ TO 15’. 

S1753. TA958959. POA 

ACRES OF NEW & USED MACHINERY & SPARES 

NH 339 double chop forage harvester 

Hay Feed out buggy (Pearce) 

Baler, rakes, mower, handlers, elevators and spare parts. 

Rakes, finger wheeeled 3PL, 3PL roller bar, tedder & 

rotary. 

MISCELLANEOUS 

Buttsworth scoops 1 yd 

3 tyne Moorehouse ripper, 3PL. 

Harrows cover, diamond, pasture & stump jump. 

Bait layes 

2, 3 & 5 tine rippers. 

Harland irrigation pump, PTO. 

Daken 3PL forklift 

Piston pump 5" x 4" (DGM) 

3PL stick rakes 6' to 10' new & sh 

GRIZZLY GRUMPY WHEELED OFFSET 

DISC PLOUGH 32 DISC. TA1015793. POA 

Forage harvesters & carts, NH Gehl & Tiki 

Rollers (Cambridge), culti packers, stones & tyre) 

7' to 28'. 

PTO hammermills, roller mills, grain gristers. From $595 

3PL, 5-9 tine trail, 8-14 tine chisel ploughs From $795 

Irrigation pipes, pumps & motors, travelling irrigators. 

Scoops, 3PL, silt blades, carryalls and rippers. 

2nd hand tractor tyres, belt pulleys, PTO From $195 

2nd hand new tines Augers, 50' x 6" & 8", pencil 14' x 4" 

new and 2nd hand. 

Harrows all types From $45 

Boom sprays, 3PL, Hardi and Silvan, 400 & 600ltr. 

Power Harrows 3PL Lely 15' 

Crump (Kurrajong 1000) 1 tonne trailing 

Manure-lime & super spreaders Super spreaders ground 

MASSEY FERGUSON 24 DISC 

WHEELED OFFSET PLOUGH .. S1690. 

TA937764. POA 

drive, ½ - 4.5 tonne. 

9' Roto wiper, new & secondhand 

Vicon spreaders 10 to 30 bag, 

Hardi 1200 ltr boomspray trail, foam & PTO. 

OFFSET/DISC PLOUGHS 

Grizzly 20 424 disc 

Gibbons Rawlings 28 plate 

SCARIFIERS & TILLERS 

Ferguson scarifiers 3PL 

19 tyne Bagshaw scarifier towable 

SHEEP AND CATTLE 

Feeders (hay & grain) 

Cattle Scales 

Feedout bins and trailers. 

CONNOR SHEA 9’ BAKER BOOT With 

Coulters. S1606. TA900741. POA 

Shearing plants, grinders, lamb cradles, handlers, 

wool pressers, bail heads, crushes, wool tables, hyd 

woolpress. 

SLASHERS 

8’ slasher 3PL (superior) 

2.3 high body Nobili mulcher 

TRAILERS 

HYD Tipping 10' x 6' 

Freighter 4 wheel trailer 

Tipping trailer 8' x 6' From $975 

TRACTORS 

Ford 3000, 45hp, 3PL, P-Steer. FE Loader. 

Fergie TEA20 petrol 

FFM-FP-5013027-TS-389 

**DELIVERY ARRANGED AUSTRALIA WIDE** SPARE PARTS: NEW AND S.H. AVAILABLE : FOR MOST EQUIPMENT 

WANTED: Tractors and Machinery, any condition, anywhere Call Selwyn on (02) 6227 7227 or (02) 6227 7261 

Hume Highway, Bookham (YASS) 2582 • OPEN 8 TO 5 MON-FRI • AH: (02) 6226 2316

TESTED 

$24,750 $160,000 

$199,980 $50,000 

CASE IH 695XL. 70hp, Cabin, Challenge 349E 

front end loader + more • NSW 0429 467 147 




2016 GVM Mako. Spra coupe, 2vm boom, 

1500L tank. • NSW 0488 442 372 

SPRAYERS 


2018 New Holland T7-260. 220hp, L4500 

loader + much more • VIC 0402 851 544 



Issue 382 > $7.95 > On sale 27/02/20 

2017 Kioti RX8030SP. ROPS, Loader & 4in1, 

had only light work • QLD 0437 113 771 


4/3/20, 2:48 pm 

Page 1 of 1 

4/3/20, 2:48 pm 

Page 1 of 1 

SEARCH 




magazine 

NEXT 

SEARCH 



list map 


AUSTRALIA 

Find new and used Tractors for GET sale ALERTS 

with Farms & Farm Machinery 

magazine 


$19,750 



list map 

GET ALERTS 


$19,750 






includes gst 


Tractors / Tractors / 0-40hp ! CALL 08 7007 6847 


FEL: YES Rated Engine SAVE Power - ITEM hp: 28 



includes gst 

EMAIL SELLER 


KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

$22,000 



RefCode: TA994405 Class: 40-100hp Drive Type: FWA 

Number Cylinders/cc: 4 Rated Engine Power - hp: 85 

Usage Hours: 5,800 

Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives 

very well. Xgoverment . Inspection most welcome 

Stonyford, VIC 


! CALL 03 8547 8644 



Usage Hours: 5,800 SAVE ITEM 



EMAIL SELLER 


KUBOTA L1-24DT TRACTOR WITH 4 IN 1 

! CALL 03 8547 8644 

FEL 28HP 

$21,450 

SAVE ITEM 

EMAIL SELLER 

Powered by 




BUY 






SELL 

Unlimited 



for just 





Off the Chain 


Fully Charged 



Czech 

44,480+ 

MATE 


8,340+ 




02 6725 4617 

ruralwrecking.com.au 

parts@ruralwrecking.com.au 

337 Oakwood Road, Inverell NSW 2360 

ABN: 48 053 335 667 

WANTED TO BUY TRACTORS FOR WRECKING 

Parts available for most makes and models of tractors 

CASE 

585, 595, 685, 695, 800, 830, 832, 870 

2WD, 885, 895, 900, 930, 932, 956, 970, 

1030, 1032, 1070, 1194, 1270, 1370, 

1390, 1394, 1594, 1690, 2090, 2094, 

2096, 2290, 2290, 2294, 2390, 2394, 

2470, 2590, 2594, 2670, 2870, 3394, 

3594, 4230, 4496, 4694, 4994, 7110, 

CVX 170, MAGNUM 275, MAGNUM 

275, MAGNUM 290, MAGNUM 305, 

MX80C, MX255, MX285, PUMA, STX 375 

QUADTRACK, STX 440 QUADTRACK, 

STX 450 

CASE IH 

1896, 4690, 4890, 4894, 5120, 5130, 

5140, 5150, 7120, 7130, 7140, 7150, 

7220, 7230, 7240, 7250, 8910, 8920, 

8930, 8940, 8950, 9130, 9150, 9170, 

9180, 9250, 9260, 9280, 9350, 9370 

QUADTRACK, 9380 QUADTRACK, 9390, 

MX90, MX130, MX135, MX230, MX240, 

MX270, MXM190, STX375, STX440 

CATERPILLAR 

CHALLENGER SERIES – 35, 45, 55, 65, 

65C, 75, 75C, 75E, 85C, 85D, 95E, 65E 

TRACK MACHINE, MT765D 

FORD 

3000, 3610, 4000, 4600, 4610, 5000, 

5610, 5640, 6000, 6600, 6610, 6700, 

6810, 7000, 7600, 7700, 7710, 7840, 

8000, 8210, 8230, 8340, 8401, 8600, 

8700, 9000, 9600, 9700,, TW5, TW10, 

TW15, TW20, TW25, 

INTERNATIONAL 

385, 414, 434, 444, 484, 514, 554, 564, 

574, 585, 624, 660, 674, 686, 696, 706, 

756,766, 786, 856, 866, 885, 886, 956, 

976, 986, 1056, 1066, 1086, 1256, 1466, 

1468, 1486, 1566, 1568, 1586, 3288, 

3388, 3588, 3688, 3788, 4166, 4186, 

4366, 4386, 4568, 4586, 4786, 5088, 

5288, 5488, 6388, 6588, 6788, 844S, 

AW6, AW7, AWD6, AWD7, B250, B275, 

W6, W7, 

JOHN DEERE 

6170R, 950, 1050, 1130, 1140, 1640, 

1750, 2010, 2020, 2030,2040, 2120, 2130, 

2140, 2250, 2450, 2650, 2850, 3010, 

3020, 3120, 3130, 3140, 3350, 3640, 

3650, 4010, 4020, 4030, 4040, 4050, 

4055, 4230, 4240, 4250, 4255, 4430, 

4440, 4450, 4455, 4555, 4560, 4620, 

4630, 4640, 4650, 4755, 4760, 4840, 

4850, 4955, 4960, 5010, 5020, 5310, 

5515, 5300, 6030, 6200, 6300, 6310, 

6320, 6330, 6400, 6410, 6620, 7210, 

7510, 7520, 7600, 7610, 7700, 7800, 

7810, 7920, 8100, 8200, 8285R, 8300, 

8310, 8330, 8345RT, 8400, 8400 TRACK, 

8410, 8430, 8360RT, 8440, 8450, 8520, 

8520T, 8530, 8630, 8640, 8650, 8760, 

8770, 8850, 8960, 8970, 9400, 9410R 

NEW HOLLAND 

7840, 8430, 8560, 8870, 9482, 9682, 

9860, 9880, 9882, 9482, 9484, G210, 

G240, L85, L95, T6020, T7030, TG230, 

TG235, TG255, TG285, TJ425, TJ450, 

TM125, TM135, TN55D, TN95F, TS100, 

TS100A, TS110A, TS125A, T9060 

STEIGER 

KP525, KP 1350, KP1325, KP1400, 

BEARCAT 3 & 4, COUGAR 2 & 4 CM250, 

PANTHER 2, PANTHER 3 ST310 & 

ST325, PANTHER 4 CM325, TIGER 

ST470, 

VERSATILE 

500, 700, 800, 835, 855, 875, 895, 900, 

935, 945, 946, 950, 956, 975, 976, 1150, 

1156 

ALSO WRECKING 

VARIOUS MODELS OF 

CHAMBERLAIN, DEUTZ FAHR, FIAT, 

JCB, LAMBORGHINI, MASSEY 

FERGUSON, MCCORMICK, SAME 

– CALL US TO ENQUIRE 

Follow us on Facebook to keep 

up to date with new stock that’s 

regularly coming in. 

@ruralwrecking 

Wrecking largest range of tractors in Northern NSW 

FFM-FP-5211221-TS-387


POOLE & 

JACKSON 

SPEED & WALPEUP 

ABN 28 100 780 069 

Ph: 03 9998 4998 

PTY LTD 

Lyndoch Motors 

Phone: (08) 8524 4140 

Jeffrey Both: 0428 844 271 

AH: (08) 8563 2387 SA 

Graham Ahrens: 0429 846 011 

AH: (08) 8524 4309 SA 

Duncan McInereney 

AH: 0427 245 140 

Visit our site: www.lyndochmotors.com.au 

email: sales@lyndochmotors.com.au 

A/H: (03) 5382 4234 

Fax: (03) 5381 0380 

Mobile: 0418 810 370 

87-89 Dimboola Road, 

HORSHAM, Vic 3402 

ABN 47 1934 965 94 

Tel: (03) 5381 0370 

CASE IH 8230 2012, r/trap, chopper, 40' 2152 draper c/w hyd. 

top link, float optimiser, levelling wheels & cross auger, pre 

season serviced, 1608 s/hrs. S207. TA926482. $352,000 

MASSEY FERGUSON 5200-36 5200-36 pick up draper windrower On Behalf 

Of Client. S44. TA907089. $33,000 

CASE IH 7130 2012, chopper, 2013 build 40' 2152 draper c/w 

hyd. top link, float optimiser, levelling wheels & cross auger, 

1400 s/hrs, pre season serviced. S228. TA988987. $319,000 

RFM COLT 

RFM Colt 32 tines x 200mm (8") 

spacing, Berigan finger tine harrows 

c/w 2 Bin + SSBox air seeder. 

HM788. TA1015742. 

Coming In POA 

HARDI COMMANDER 5030 2003 Commander V 5000 Litre tank 30mtr boom 

463 spray pump pilot controller triplet nozzles chemical hopper. 

OBC. S47. TA1016214. $22,000 

CASE IH 8120 2009, 620 duals, chopper, 40 Case IH 2152 

draper front, float optimiser, levelling wheels, 2412 s/hrs pre 

season serviced. S234. TA1042962. $231,000 

HORWOOD BAGSHAW SCARIBAR 350 Suit Rear Tow Seeder AGMASTER 

Press Wheels. 42' Wide. 15 Inch, Extra Original Tines Available. Originally 

36' with 7.5" Tine Spacing. S45. TA937451. $29,000 

GASON 1830RT 2 BIN GASON 1830 Rear Tow 2 Bin 4 Outlet Dual Front 

Castor Wheels. S27. TA598908. 

$33,000 Incl.Gst 

HARVESTING 

Gleaner R60 30 Front $20,000 

TRUCKS 

Mercedes Benz 2222 

prime mover with 30 Ft flat top trailer 

converted to tipper $20,000 

Mercedes Benz 1418 

single drive with page and page 

pusher axle $10,000 

A RANGE OF NEW 8" AND 10" 

GRAIN LINE AUGERS AVAILABLE 

FFM-TV-M-5114257-A 

WINDROWERS 

NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT DRAPER FRONT ....... POA 

MOWER CONDITIONER 

MASSEY FERGUSON 1372 12 FT STEEL ROLLERS CENTRE SWING ...............................................Coming in 

MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ................................................Coming in 

LELY PC 370 RS 3.7 MT STEEL ROLLERS CENTRE SWING late model ..................................................... POA 

TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA 

KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA 

TAARUP 4036 3.5 MTR flail mower conditioner one owner ..................................................................... POA 

VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA 

TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA 

MOWERS 

TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ............................................................. POA 

CLAAS 300 DISCO 3 MT DISC MOWER ............................................................................................Coming in 

CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA 

LELY 320 3.2MT disc mower one owner ................................................................................................. POA 

TAARUP 2028 7 disc mower .................................................................................................................... POA 

ROUND BALER 

WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER ........................................................... POA 

WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER ...................................................................... POA 

WELGER 535 MASTER 6X4 ONE OWNER ................................................................................................ POA 

CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA 

CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA 

JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA 

CLAAS 280 6x4 roto feed string and net ................................................................................................ POA 

JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA 

CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA 

GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................ POA 

JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA 

HAY RAKES 

FELLA TS 761 6.6MT twin rotor centre delivery rake .............................................................................. POA 

GENDORE 6500 6.5 twin rotor rotary rake .............................................................................................. POA 

KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA 

SQUARE BALERS 

MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber ..... POA 

NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA 

MF 185 3x3 Square Baler ....................................................................................................................... POA 

CASE 8580, 4x4 Square Baler ................................................................................................................ POA 

CASE 8570 3x3 Square Baler ................................................................................................................. POA 

TRACTORS 

FENDT 410 VARIO 100 HP VERY ORIGINAL one owner ............................................................................ POA 

MASSEY FERGUSON 7615 VARIO 140 hp one owner excellent condition ................................................ POA 

MASSEY FERGUSON 7475 VARIO 135 HP LOADER READY one owner .................................................... POA 

VALTRA T161 160 H.P.FWA ONE OWNER air front suspension, electro hyds ............................................ POA 

JOHN DEERE 9200 ARTICULATED 310 HP lower hours excellent condition ............................................. POA 

NEW HOLLAND 8560 160HP Front linkage and pto a/c cab fwa ............................................................. POA 

MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA 

VALTRA 6350 90 HP cab F/E loader FWA one owner tractor .................................................................. POA 

MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA 

CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA 

CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA 

MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader ............................................................. POA 

MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA 

DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA 

MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA 

ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA 

MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA 

INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA 

DAVID BROWN 880 with F/E loader ........................................................................................................ POA 

MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop 

MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop 

FFM-TV-5012485-A 

GASON SCARITILL SNFH45-200 

SNFH45-200 

Gason Scaritill, 9m, Floating hitch, 200mm 

spacing, 400lb, Dual hose kit and rolling 

prickle harrows.. HM789. TA1012978. 

$60,500 

GYRAL AG-BOSS 

Gyral Ag-Boss hyd tine, 

Coulters and press 

wheels on 300mm 

spacing.. HM775. TA900984. 

$44,000 

For our full range of equipment please visit: 

hicks-machinery.tradefarmmachinery.com.au 

FFM-TV-5013318-A


G.W.S. Machinery Pty 

Ltd 

Ph: (02) 4577 4622 Parts: (02) 4577 5833 

Fax: (02) 4577 3352 A/hrs: (02) 4579 6071 

5 Walker Street, 

South Windsor NSW 2756 

Email: sales@gwsmachinery.com.au 

Web: www.gwsmachinery.com.au 

Authorised Agents for: 

Massey Ferguson, Iseki, 

Branson, Silvan, 

Howard Jarrett, Zetor 

Kawasaki 

NEW TAKE OFFS Complete set of wheels & tyres to suit 

Massey Ferguson 540/65R38 & 440/65R28. S167. 

TA989409. 


NEW TAKE OFFS Michelin 13.6R24 tyre. S168. TA989411. 

$700 Inc GST 

NEW TAKE OFFS Michelin 420/85R34 tyre. S169. 

TA989413. 


NEW TAKE OFFS Michelin 420/70R24 tyre. S170. 

TA989414. 

$700 Inc GST 

MASSEY FERGUSON 5445 4wd, 100Hp, approx 6000hrs, 

new paint, fully serviced. S174. TA1021122. 

$40,000 Inc GST 

KUBOTA M4030 50HP, loader, 4WD, new paint, 

workshop checked, can upgrade to 4in1 bucket at extra 

cost. S180. TA1039003. 

$20,000 inc GST 

ISEKI TK538 38Hp, 4wd, turf tyres, hydraulic remotes, 

creeper gears. S175. TA1021123. $10,000 Inc GST 

TORO 3280D Outfront mower, 72 cutting deck, 4wd, 

Kubota diesel engine. S176. TA1021124. $10,000 Inc GST 

KAWASAKI MULE 3000 620cc petrol engine, 2WD, 

selling as is condition. S159. TA977894. $6,000 Inc GST 

ARGO FRONTIER 6x6 Amphibious vehicle, as new 

condition, selling on behalf of customer. S160. TA977896. 

$12,000 Inc GST 

MASSEY FERGUSON 362 Good condition. S179. TA1028867. 

POA 

FORD 1710 4WD, comes with Jarrett slasher and 

carryall, selling on behalf of customer. S156. TA977888. 

$12,000 Inc GST 

FFM-HH-5011205-A 

Rocky River Ag Services 

CRYSTAL BROOK SA 

Ph 08 8636 2772 

Sales, Service & Parts 

ABN: 961 614 184 01 

lsmart@rockyriverag.com.au 

www.rockyriverag.com.au 

CASE IH 7140 

Axial Flow Combine, c/w 3152 40ft Draper Front, rocktrap, straw 

chopper, PRO700, NAV & Receiver, only 515 rotor hours, 2016 

model, very good condition. 51074. TA1008189. 

$434,500 

GRAINLINE GMP1036 "NEW" 

NEW Grainline GMP1036 Auger, c/w operator platform, hyd wheel 

drive & lift. 3897. TA1046650. 

$22,330 

NEW HOLLAND BB940 

Square Baler, 2005 model, c/w Lincoln auto greaser, chain oiler, 

good condition. 51075. TA1038853. 

$25,300 

CASE IH 4420 

c/w Aim Command, PRO600 monitor, Accuguide complete HP 

enabled, 36m boom, auto section control, auto height control, 3" fill 

pump, auto fold, 380/90R46 tyres, good condition. 50989. TA889124. 

$247,500 

CASE IH MAGNUM 200 

c/w 3PL, CVT Transmission, 4 remote outlets, 860 eng hrs, 2016 

model, excellent condition. 51012. TA931820. 

$181,500 

Brad Page 0428 833 193 • David Cliff 0427 859 960 • Lynton Smart 0427 859 967 

CASE IH 7140 

Axial Flow Combine, c/w 3152 40ft Front, Straw Chopper & upper 

cross auger, only 1100 hrs, CROP READY!!. 51026. TA971303. 

$379,500 

FFM-HH-5012302-A


COBRAM FARM EQUIPMENT PTY LTD 

Ph (03) 5872 1722 (03) 5872 1265 

A/H (03) 5865 8262 

Lot 3, Murray Valley Highway 

PO Box 26, Cobram, Vic 3644 

ACN 086 668 108 

MASSEY FERGUSON 

HAYMOWERS SLASHERS MULCHERS 

Reduce your cutting time! 

Call us on 08 8584 7609 or visit 

www.loxtonengineering.com.au 

16 Starcevich Road, Box 18 LOXTON SA 5333. Fax 08 8584 6380 

SELL YOUR 

FARM 

MACHINERY 

VISIT THE WEBSITE 

OR CALL 1300 362 272 

NEW HOLLAND H8080 

Windrower with 15.5ft disc mower 

conditioner, 

Mow Max front, also 25ft draper end knives 

and trailer. S31. TA759375. 

POA 

KUBOTA M9540 CAB 

2013, FWA/4WD front end loader tractor, V3800DIIE510. 

NSW. DIY1044166. 0414 449 633. $39,600 

MASSEY FERGUSON 7615 DYNA VT 

FWA one owner tractor, Vario transmission, 

in excellent condition. S38. TA1042987. 

POA 

WINDROWERS 

NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT DRAPER FRONT ....... POA 

MOWER CONDITIONER 

MASSEY FERGUSON 1372 12 FT STEEL ROLLERS CENTRE SWING ...............................................Coming in 

MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ................................................Coming in 

LELY PC 370 RS 3.7 MT STEEL ROLLERS CENTRE SWING late model ..................................................... POA 

TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA 

KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA 

TAARUP 4036 3.5 MTR flail mower conditioner one owner ..................................................................... POA 

VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA 

TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA 

MOWERS 

TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ............................................................. POA 

CLAAS 300 DISCO 3 MT DISC MOWER ............................................................................................Coming in 

CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA 

LELY 320 3.2MT disc mower one owner ................................................................................................. POA 

TAARUP 2028 7 disc mower .................................................................................................................... POA 

ROUND BALER 

WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER ........................................................... POA 

WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER ...................................................................... POA 

WELGER 535 MASTER 6X4 ONE OWNER ................................................................................................ POA 

CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA 

CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA 

JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA 

CLAAS 280 6x4 roto feed string and net ................................................................................................ POA 

JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA 

CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA 

GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................ POA 

JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA 

HAY RAKES 

FELLA TS 761 6.6MT twin rotor centre delivery rake .............................................................................. POA 

GENDORE 6500 6.5 twin rotor rotary rake .............................................................................................. POA 

KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA 

SQUARE BALERS 

MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber ..... POA 

NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA 

MF 185 3x3 Square Baler ....................................................................................................................... POA 

CASE 8580, 4x4 Square Baler ................................................................................................................ POA 

CASE 8570 3x3 Square Baler ................................................................................................................. POA 

TRACTORS 

FENDT 410 VARIO 100 HP VERY ORIGINAL one owner ............................................................................ POA 

MASSEY FERGUSON 7615 VARIO 140 hp one owner excellent condition ................................................ POA 

MASSEY FERGUSON 7475 VARIO 135 HP LOADER READY one owner .................................................... POA 

VALTRA T161 160 H.P.FWA ONE OWNER air front suspension, electro hyds ............................................ POA 

JOHN DEERE 9200 ARTICULATED 310 HP lower hours excellent condition ............................................. POA 

NEW HOLLAND 8560 160HP Front linkage and pto a/c cab fwa ............................................................. POA 

MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA 

VALTRA 6350 90 HP cab F/E loader FWA one owner tractor .................................................................. POA 

MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA 

CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA 

CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA 

MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader ............................................................. POA 

MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA 

DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA 

MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA 

ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA 

MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA 

INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA 

DAVID BROWN 880 with F/E loader ........................................................................................................ POA 

MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop 

MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop 

FFM-TV-NMAI-5012666-A 

CASE IH MX100 Loader with hay 

forks, X100AC4JJE0968102. VIC. 

DIY1045485. 0417 364 523. $35,000 

CLAAS ARION 430 CIS 2018, 

Current model tractor in as new 

condition. Surplus to needs. Will 

have service completed so ready 

for work, 06092F. VIC. DIY1043441. 

0429 300 759. $77,000 

KUBOTA RTV-X1140W-H 2019, 

with only 19hrs. Powerful 1.1L 

diesel and 25mph top speed. 

Excellent condition. Plastic canopy. 

Original owner, garage kept. Do not 

miss this machine, VIC. DIY1046759. 

03 5721 6767. $8,199 

JOHN DEERE GATOR XUV825I S4 

2016, 4X4 W/power steering. ONLY 

28 hrs, fully hydraulic 72" plow 

attachment. Roof with overhead 

lighting, and front cargo basket. 

The XUV is very very clean 

obviously how it should be at these 

low hrs. Mechanically it's perfect, 

runs and rides like new. Always 

stored indoors etc, VIC. DIY1047030. 

03 5820 4144. $6,399 

NEW HOLLAND TD 70D 2011, only 

598 hours, very good condition, 

small hobby farm use, tyres 95%. 

Located Mornington Peninsula, 

HFD092748-2. VIC. DIY1046774. 

0417 500 376. $34,500 ONO 

KUBOTA RTV-X1100C 2019, 

performance, quality reliability, ride 

and comfort and value. Comes with 

radio, comes as pictured. Comes 

with Technology Package. Pick up 

or delivery available, WA. 

DIY1042945. 08 6102 5127. $8,299 

GOLDACRES PRAIRE In good 

working order, selling due to 

upgrade, 146432. SA. DIY1046552. 

0427 176 304. $15,000 

JOHN DEERE 3025E 2017, like new 

condition. 33 Total hours. 4X4, PTO, 

loader, quick disconnect bucket, no 

leaks,no issues, hydrostatic (No 

Clutch), differential lock, 52947. 

VIC. DIY1047031. 0358204144. $8,299 

BOBCAT 3400D UTILITY VEHICLE 

2017, XL, HD1000, islated hard cab, 

crew, EPS, hot/cold air, low hr, 

original owner books, owner's 

manuals, keys total of 2 doors. Full 

work utility vehicle. Pick up or 

delivery available, WA. DIY1043086. 

08 6102 5127. $7,299 






0429 300 759. $77,000 






0429 300 759. $77,000 

JOHN DEERE GATOR XUV825I S4 

2016, 4X4 W/power steering. ONLY 

28 hrs, fully hydraulic 72" plow 

attachment. Roof with overhead 

lighting, and front cargo basket. 

The XUV is very very clean 

obviously how it should be at these 

low hrs. Mechanically it's perfect, 

runs and rides like new. Always 

stored indoors etc, VIC. DIY1047030. 

03 5820 4144. $6,399

PRIVATE Advertising 

www.tradefarmmachinery.com.au/sell 1300 362 272 

FRAHN VAL1500 - 6 

2020, grain cleaner. 3 phase power. Approx 6 25plus 

tonnes p/hour. Tandem axle suspension with new 15" 

tyres & wheels, VAL15006231708027. VIC. DIY1045972. 

0418 504 269. $53,460 Incl GST 

FRAHN HCC-50 

2019, grain cleaner recycled air wind tunnel. Horizontal 

Cyclone-Complex. (HCC. Capacity Model 50 HCC. 

Pre-cleaning. 50 TPH. Quality cleaning 15-35 TPH, 

HCC-501708030. VIC. DIY1045490. 0418 504 269. $39,490 

TRACTOR TYRES NEW 

BRAND NEW tractor tyres. Various brands, BKT, Harvest, 

Logger tyres, Apollo, Goodyear, Firestone, TIANLI Nokian, 

Simex, Westlake etc. Most sizes, bias & radial / forestry, 

truck & earthmover as well. Call Mick anytime, .. QLD. 

DIY561636. 0413 389 356. 

$99 From 

KUBOTA M9540 CAB 

2013, FWA/4WD front end loader tractor, Not applicable. 

NSW. DIY1044166. 0414 449 633. $39,600 

NEW HOLLAND T7.210 AUTOCOMMAND 

2017, 1650Hr's, 50KPH vario transmission, premium 

suspended cab inc air suspension leather seat climate 

control & bluetooth radio, premium front linkage with PTO 

& 1 x SCV, front axle suspension, 4 x rear SCV, 540 & 

1000RPM rear PTO, ISOBUS, hyd trailer brakes, hyd 

power beyond & LS ready, MICHELIN 480/80R42 & 

380/85R30 etc, T72102017. VIC. DIY1037849. 0402 851 544. 

$152,900 = $139,000 + GST 

FRAHN CAP - 10 

2019, Gravity table. (Capacity 10TPH on Cereals) is used 

for fine grading & impurity separation of grains & small 

seeds with identical particle size but different in their 

specific weight, CAP10201708033. VIC. DIY1045973. 

0418 504 269. $46,090 

FRAHN HCC-50 

2019, grain cleaner recycled air wind tunnel. Horizontal 

Cyclone-Complex. (HCC. Capacity Model 50 HCC. 

Pre-cleaning. 50 TPH. Quality cleaning 15-35 TPH, 

HCC-501708030. VIC. DIY823036. 0418 504 269. $39,490 

FRAHN VAL1500 - 6 

2020, grain cleaner. 3 phase power. Approx 6 25plus 

tonnes p/hour. Tandem axle suspension with new 15" 

tyres & wheels, VAL15006231708027. VIC. DIY823029. 

0418 504 269. $53,460 Incl GST 

FRAHN CAP - 10 

2019, Gravity table. (Capacity 10TPH on Cereals) is used 

for fine grading & impurity separation of grains & small 

seeds with identical particle size but different in their 

specific weight, CAP10201708033. VIC. DIY823049. 

0418 504 269. $46,090 

Powered by 


TRUCKING MARKETPLACE * 

BUY 

More than 25,000 

trucks, trailers, buses, 

forklifts and cranes, and 

parts and accessories 

listed for sale 

SELL 

Unlimited stock listings on TradeTrucks.com.au 

plus ATN’s Fullyloaded.com.au, 

OwnerDriver.com.au, TradeEarthmovers.com.au, 

TradeFarmMachinery.com.au and 

TradePlantEquipment.com.au for $360 per month 

www.TradeTrucks.com.au 


. 

Caterpillar D6T bulldozer 

proves its might 

Proud history of 

Kato explained 

UTE 

REVIEW 

Ram 1500 V6 EcoDiesel 

BAUER MEDIA: GOLD MEDIA SPONSOR 

15-17 May 2020 – PANTHERS PENRITH SYDNEY 

AUSTRALIA’S LARGEST 

CONSTRUCTION 

EQUIPMENT EXPO 

$176,000 $110,000 

$184,000 

2016 Volvo EC300DL. Full serv history, quick 1999 Caterpillar D6MXL. VG Cond, reg service, 2018 CASE CX-210C. Still under warranty, 

hitch 90mm pins + more n NSW 0427 070 358 6 way blade, rear rippers. n VIC 0400 044 381 low hours, many extras n VIC 0402 066 506 



The Tricon supplied Evoquip 

Cobra 230R provides versatility 

and excellent fuel efficiency for 

producers >> Page 6 

Trucks, utes & 


Powered by 



CONSTRUCTION EQUIPMENT MARKETPLACE * 

BUY 

More than 43,000 excavators, 

loaders, dozers, backhoes, graders, 

trucks and trailers, buckets and 



SELL 

Unlimited stock listings on 

TradeEarthmovers.com.au 

PLUS 


for just $360 per month 

Issue 369 • $7.95 

On sale 02/03/20 

INSIDE 

Pure gold 

Earthmovers, excavators, plant & equipment for sale 

60’s baby 

,!3BD0A6-aaejcj!:K;N 

MAJOR 

crush aggregate 

47,600+ 

17,275+ 

www.TradeEarthmovers.com.au 



ISSUE 329 

Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment 

heavy weight 

ADVANTAGE 

Lawson Sideloader Services’ fleet of twin-steer side loaders 

deliver edge over competitors. Full story at TradePlantEquipment.com.au 

$57,200 

Star Stainless Steel Vacuum Tanks. Hydraulic lock 

back door tip, custom made • NSW 0416 096 730 

$23,250 

2011 Lincoln Air Vantage 500 belt drive compressor. 

Service history available. • QLD 0411 020 252 

$6,000 ONO 

Allight Combi light. 3 cyl Perkins diesel, emergency 

stop buttons, yard legs + more • WA 0419 909 081 

21,469+ items for sale in print & online


ENGINES – GENERATORS – PUMPS 

www.dieselparts.com.au 

ENGINES – GENERATORS – PUMPS 

Irrigation 


DPS 

Pumps 

we 

Build 

em 

DPS 

Pumps 

DPS 

Pumps 

DPS PUMPSET PS/80X50-250/DC/V2403T Max Volume: 

29 l/sec Max head: 90 meters. S471. TA993818. POA 

DPS PUMPS PS/HB1040/DC/V3800 KUBOTA Max Vol: 

240 l/sec Max Head: 20 meters. S473. TA993837. POA 

DPS PS/150X125-315/DCBF4M1013EC Max volume: 

140 l/sec Max Head: 85 meters. S472. TA993820. POA 

DPS 

Pumps 

DPS PUMPSET FSR150/DC/V2203 Self-priming Max 

volume: 100 l/sec Max head: 32 mrts. S78. TA681808. POA 

Pumpsets Built To Your Requirements 

All our pumpsets are manufactured onsite 

in our Brisbane workshop, using quality 

components and engines from the worlds 

leading brands. 

If you have an application, we can match a 

pump and engine combination to suit. 

So give us a call with your requirements 

DPS 

Pumps 

DPS PUMPS PS/100X65-315/DC/1104A-44T Perkins 

Max vol: 48 l/sec Max head: 105m. S501. TA1039412. POA 

DPS 

Pumps 

DPS 

Pumps 

DPS PUMPS NS100C/DC/D1105 KUBOTA Max. vol: 40 

l/sec Max head: 26 meters. s73. TA377966. POA 

DPS 

Pumps 

DPS MANUFACTURING We manufacture pumpsets to 

suit your application. S270. TA819842. 

POA 

DPS PUMPS PS/D80X50-250/DC/V2203 KUBOTA Max 

vol: 28 l/sec Max head: 77 mtrs. S71. TA640321. POA 

DPS 

Pumps 

DPS 

Pumps 

DPS 

Pumps 

DPS PUMPS PS/HB1040/DC/1104A-44T 10" pump. Max 

vol: 300 L/Sec. Max head: 25 mtrs. S81. TA542300. POA 

DPS PUMPS PS/500HW6/120C/JD60681T 20" max vol: 

600 l/sec. Max head: 17 meters. S83. TA192351. POA 

DPS PUMPS PS/HB0835/VEE/V2203 8" PUMP. Max Vol: 

180 L/SEC. Max Head: 17 MTRS. S443. TA950860. POA 

DPS 

Pumps 

DPS 

Pumps 

DPS 

Pumps 

DPS PUMPS PS/400HW7/120C/1104A-44T Perkins 

86hp - Max. volume: 560 l/sec. S88. TA167474. POA 

DPS PUMPS PS/500HW6/GB2.5/6BTA5.9 CUMMINS 20" 

to 830 l/sec. S86. TA192359. 

POA 

DPS PUMPS PS/26HBC40/300/QSL9 Cummins Max vol: 

1750 l/sec Max head: 18 meters. S84. DPLIn13574. POA 

Phone: 07 3640 9400 

Email: info@dieselparts.com.au 

Phone: 07 3640 9400 


PET-FP-5013449-F


21 HILDA STREET HAMILTON. QLD. 4007 




KUBOTA 

Powering Australia 

KUBOTA 


KUBOTA 


POWER PACK 

Seriously Reliable 

POWER PACK 


POWER PACK 


KUBOTA D905-PP 3 cylinder power pack 17hp 

continuous at 3000. S445. TA978449. 

POA 

KUBOTA 


KUBOTA D1105 3 cylinder power pack 22HP at 3000 

RPM continuous. D1105-PP. TA606122. 

POA 

KUBOTA V1505 4 cylinder diesel engine power pack, 

29HP at 3000 RPM continuous. V-1505-PP. TA606123. POA 

KUBOTA 


POWER PACK 


POWER PACK 


KUBOTA V2203 diesel power pack 40hp countinuous at 

2800 RPM. V2203-PP. TA606126. POA 

KUBOTA 


KUBOTA V2403-T 4 cylinder diesel power pack 48.0hp 

continuous at 2700 RPM. V2403-T. TA735673. POA 

KUBOTA 


POWER PACK 


KUBOTA V3300 4 cylinder power pack 59.1hp 

continuous at 2600 RPM. S151. TA768924. 

POA 

Bring your equipment back to life with a replacement 

Kubota engine used in market leading excavators, 

tractors, mowers, skid steers and mini loaders 

KUBOTA REPOWER ENGINES FOR MACHINERY. S500. 

TA1011866. 

POA 

POWER PACK 


KUBOTA V3800 4 cylinder power pack 68.5hp 


POA 

KUBOTA 


KUBOTA 


Manual and Electric Start 

KUBOTA 


POWER PACK 


RK70 7hp 

RK80 8hp 

RK95 9.5hp 

RT125 12.5hp 

RT140 14hp 

POWER PACK 


Also Available 

KUBOTA V3300T 4 cylinder diesel engine 72.1HP 

countinuous at 2600 RPM. V3300T. TA498568. POA 

KUBOTA RT100 single cylinder 9.0hp continuous at 

2400 RPM. S418. TA939037. POA 

KUBOTA V3800T 4 cylinder turbo power pack 82.5hp 


POA 

KUBOTA 


Generators 

KUBOTA 


Generators 

KUBOTA 


Generators 

12 kVA Single Phase 

10 kVA Three Phase 


12.5 kVA Single Phase 


12.5 kVA Three Phase 









KUBOTA J108-AUS 8.0kVa, single phase. Partially 

enclosed. J108. DPLIn13526. 

POA 

KUBOTA KJ-T130DX 12.5 kVA enclosed. Three phase 

with outlets. KJ-T130DX. TA556703. 

POA 

KUBOTA SQ3200 20.0kVa, three phase Fully enclosed 

silent pack. SQ3200. TA63983. 

POA 

Phone: 07 3640 9400 


Phone: 07 3640 9400 




PET-FP-5013449-A






KOHLER ENGINES 

Relentless Power-Legendary Performance 

4.8hp 

3 YEAR 

WARRANTY 

KOHLER KD225 single cylinder, air cooled diesel engine 

4.8hp at 3600 RPM. KD225. TA728772. 

POA 



6.7hp 

3 YEAR 

WARRANTY 


6.7hp at 3600 RPM. KD350. TA728773. 

POA 



10.9hp 

3 YEAR 

WARRANTY 


10.9hp at 3600 RPM. KD440. TA728775. 

POA 



18.8hp 

3 YEAR 

WARRANTY 

KOHLER KD425-2 Twin cylinder, air cooled diesel 

engine 18.8hp at 3600 RPM. KD425-2. TA728776. POA 



23.1hp 

3 YEAR 

WARRANTY 

KOHLER KD477-2 Twin cylinder, air cooled diesel 

engine 23.1hp at 3600 RPM. KD477-2. TA728777. POA 



28.5hp 

3 YEAR 

WARRANTY 

KOHLER KD625-2 Twin cylinder, diesel engine 28.5hp at 

3000 RPM. Electric start. KD625-2. TA728778. POA 



42.0hp 

3 YEAR 

WARRANTY 

KOHLER KD626-3 Three cylinder, diesel engine 42.0hp 

at 3000 RPM. Electric start. KD626-3. TA728779. POA 



14.2hp 

3 YEAR 

WARRANTY 

KOHLER KDW702 2 cylinder water cooled diesel, 14.2 

hp continuous at 3600 RPM. s112. TA682436. POA 



34.0hp 

3 YEAR 

WARRANTY 

KOHLER KDW1603 3 cylinder water cooled diesel, 34 hp 


POA 



44.1hp 

3 YEAR 

WARRANTY 

KOHLER KDW2204 4 cylinder water-cooled 44.1 hp 

continuous at 3000 RPM. KDW2204. TA694334. POA 



54.5hp 

3 YEAR 

WARRANTY 

KOHLER KDW2204T 4 cylinder water-cooled turbo 54.5 

hp continuous at 3000 RPM. KDW2204T. TA694337. POA 


Forging The Future 

37.8hp 

3 YEAR 

WARRANTY 

KOHLER KDI1903M 3 cylinder power pack engine 

37.8hp continuous at 2600 RPM. S131. TA747914. POA 


Forging The Future 

44.6hp 

3 YEAR 

WARRANTY 


Kohler Petrol Engines 6 to 14hp 

KOHLER 

PETROL 

Kohler Command V-Twin Petrol 

KOHLER 

KOHLER KDI2504M 4 cylinder power pack engine 


KOHLER CH395 single cylinder petrol engine 9.5 hp 

available in recoil or electric start. CH395. TA729062. POA 

KOHLER PETROL Auger engines. S288. TA855711. 

POA 

Phone: 07 3640 9400 


Phone: 07 3640 9400 


PET-FP-5013449-C






Pump Power 

Pump Power 

BF6M1015C 366.0hp 

BF6M1015CP 402.0hp 

DRIVE 

JUST 

GOT 

BIGGER 

DRIVE 

JUST 

GOT 

BIGGER 

DEUTZ BF6M1015C 6 cylinder water cooled turbo 366.0 

hp continuous at 2100 rpm. S438. TA942887. POA 

Deutz Drive The No1 Choice 

DEUTZ THE ENGINE COMPANY WE LOVE ENGINES. S415. 

TA910955. 

POA 


DEUTZ BF6M1015CP 6 cylinder water cooled 402.0 hp 

continuous at 2100 rpm. S436. TA942844. 

POA 


F2L2011 29.6hp 

F3L2011 46.2hp 

F4L2011 61.7hp 

BF4L2011 74.9hp 

DEUTZ 

The Engine Company 

DEUTZ F2L2011 2 cylinder diesel engine, 29.6HP 


POA 

DEUTZ 

The engine Company 

DEUTZ F3L2011 3 cylinder diesel engine, 46.2HP 

continuous at 2800 RPM. F3L2011. TA614111. POA 

DEUTZ 


DEUTZ F4L2011 4 cylinder diesel engine, 61.7HP at 

2800 RPM continuous. F4L2011. TA614113. POA 




F3L914 55.1hp 

F4L914 73.4hp 

F6L914 110.8hp 

BF4L914 95.2hp 

BF6L914 155.0hp 

DEUTZ 


DEUTZ F3L914 3 CYLINDER AIR COOLED 55.1hp 

CONTINUOUS AT 2300rpm. S440. TA944732. POA 

DEUTZ 


DEUTZ BF4L914 4 cylinder air cooled turbo charged 


DEUTZ 


DEUTZ F6L914 6 cylinder air cooled diesel 110.8hp 


POA 




BF4M1013E 108.6hp 

BF4M1013EC 132.1hp 

BF6M1013EC 193hp 

BF6M1013E 164.9hp 

DEUTZ 


DEUTZ BF4M1013E water cooled Deutz diesel engine 

108.6hp continuous at 2300 rpm. S133. TA752079. POA 

DEUTZ 


DEUTZ BF6M1013EC water cooled Deutz diesel engine 


DEUTZ 


DEUTZ BF6M1013E water cooled Deutz diesel engine 

164.9hp continuous at 2300 rpm. S135. TA752087. POA 

STAY POWERED WITH DEUTZ 

Available kVA: 

13-21-33-44-62 

81-110-140-170 

190-220-275-350 

380-415-480-55 



13-21-33-44-62 

81-110-140-170 

190-220-275-350 

380-415-480-550 



13-21-33-44-62 

81-110-140-170 

190-220-275-350 

380-415-480-550 

DEUTZ DPS33 30.0 kVA Deutz 3 phase generator set in 

canopy. S405. TA910919. 

POA 


canopy. S406. TA910921. 

POA 


canopy. S407. TA910922. 

POA 

Phone: 07 3640 9400 


Phone: 07 3640 9400 

Email: Phone: info@dieselparts.com.au 

07 3640 9400 

PET-FP-5013449-B






HATZ 

D SERIES HEAVY DUTY 

HATZ 


HATZ 


Full Power 

For 

Full Satisfaction 

Full Power 

For 


Full Power 

For 


HATZ 1D42Z single cylinder 8.6hp continuous at 3600 

RPM. S214. TA796092. 

POA 


RPM. S215. TA796093. 

POA 

HATZ 1D81Z Single cylinder air cooled diesel engine, 

12.6HP continuous at 3000 RPM. 1D81Z. TA614118. POA 

HATZ 


HATZ 

Enter Text 

HATZ 

AIR-COOLED 2 CYLINDER 

Full Power 

For 


Full Power 

For 


Full Power 

For 



RPM. S216. TA796094. 

POA 

HATZ 2G40 2 cylinder air cooled diesel engine, 18.6HP 

continuous at 3000 RPM. s100. TA682431. 

POA 

HATZ 2M41Z Air-cooled 2 cylinder diesel engine 32.2hp 

continuous at 3000 RPM. 2M41Z. TA694324. POA 

HATZ 


HATZ 


HATZ 

SILENT PACK 1 CYLINDER 

Full Power 

For 


Full Power 

For 


Low Noise 

HATZ 3M41Z Air cooled 3 cylinder diesel engine 48.7HP 


HATZ 4M41Z Air-cooled 4 cylinder diesel engine 65.0hp 


HATZ 1D81C Silent pack single cylinder 12.1hp 


POA 

HATZ 


HATZ 


HATZ 


Low Noise 

Low Noise 

Low Noise 

HATZ 2L41C Hatz 2 cylinder SILENT PACK engine 

29.9 hp continuous at 3000 RPM. 2L41C. TA699409. POA 

HATZ 3L41C 3 Cylinder SILENT PACK engine 

44.9hp continuous at 3000 RPM. 3L41C. TA699417. 

POA 

HATZ 4L41C 4 cylinder SILENT PACK engine 

59.7 hp continuous at 3000 RPM. 4L41C. TA699423. POA 

HATZ 

POWERED SILENT PACK 

HATZ 

POWERED SILENT PACK 

HATZ 

NEW H50 ENGINE PUMPSET 

Powered 

Pump Sets 

Powered 

Pump Sets 

Powered 

Pump Sets 

DPS PUMPS D125X100-200/DC/4L41C Hatz max vol: 90 

l/sec max head: 55 meters. silent pack. TA191498. POA 

DPS PUMPS FSR150/DC/2L41C SELF PRIMING 73 l/sec. 

6". TA191400. POA 

DPS PUMPS 100X65-250/DC/4H50T1 max volume: 57 

l/sec Max head: 98 meters. S129. TA747878. POA 

Phone: 07 3640 9400 


Phone: 07 3640 9400 


CREATING POWER SOLUTIONS. 

CREATING POWER SOLUTIONS. 

PET-FP-5013449-D


(07) 4630 4784 

www.nkf.net.au 

ASSORTED HDPE PIPE 

100m DN110 PN16 $536 

100m DN90 PN16 $360. S133. TA983087. 

$658 Each 

LARGE STEEL PIPE 

12m 1500x16 $9,469 

12m 1200x16 $7,365 

12m 1067x23.5 $6,380 

S131. TA983085. 

POA 

PORTABLE BUILDINGS 

Full list of buildings. Available on our website. 

S140. TA983097. 

POA 

DIESEL TANKS 

1,000L $700 inc GST* 

26,000L $18,000 inc GST* 

53,000L $26,000 inc GST* 

109,00L $49,000 inc GST* 

S55. TA416944 

STEEL DRILL TUBE 

We are currently out of stock. However, we are 

taking orders. 

73mm & 89mm 

nkfgroup@gmail.com. S130. TA983082. 

POA 

HDPE PIPES 

20m DN400 PN12.5 $1,170 

20m DN560 PN12.5 $2,295 

20m DN800 PN12.5 $4,682 

S71. TA466248. 

POA 

FREIGHT SERVICES AVAILABLE 

Road train capable of general freight. QLD & 

Northern NSW. Call for a quote 

S137. TA983091. 

POA 

NKF 

Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350 

PO Box 58 Wyalla Plaza Q 4350 

WATER TANKS 

36,000L $11,000 

10,000L $3,000 

7,500L $2,250 

S141. TA983098. 

POA 

(07) 4630 4784 

E nkfgroup@gmail.com www.nkf.net.au 

“ * Prices subject to change, check website or ring for current pricing.” 

SMALL STEEL PIPE 

11.5m 610x12.7 $3,276 

18m 406x6.4 $993 

18m 324x6.4 $1,103 

18m 273x8.2 $1,244 

S132. TA983086. 

POA 

Specialising in Second Hand Industrial Equipment 

Mob: 0419 002 950 

PET-FP-5190451-A


HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES 

PTY LIMITED ABN 17 064 853 318 

2500KG Gas Forklift Hire From $100 Per Week 

KOMATSU FG40ZT-7 

4 Tonne, 4.5 Metre LPG Forklift. A006. 

TA239035. 

$25,300 

TOYOTA 42-2TD25 

48 Tonne Diesel 2015 Model Tow Tug. 

K066. TA1037514. 

$33,000 

JLG 4013 TELEHANDLER 

2014, 4 Tonne, 13 Metre Diesel 

Telehandler 

K047.. TA1028369. 

$66,000 

TOYOTA 62-6FD25 

2.5 Tonne, 3.7 Metre Diesel Forklift. 

L010. TA1045703. 

$9,900 

TOYOTA CBTY4 

4 Tonne Electric Stand-On Tow Tug. 

ToyElec. TA1027566. 

$5,500 

KALMAR DC15-12 

15 Tonne Diesel Container Handler 

Forklift. F092. TA769581. 

$77,000 

6 MARIEANNE PLACE, MINCHINBURY, NSW, 2770 

P: (02) 9832 9777 F: (02) 9832 9977 

E: aonefork@lifttrucks.com.au 

NISSAN JWHR01L18U 

1.8 Tonne, 6 Metre Electric Reach Truck. 

G004. TA383924. 

$6,600 

NISSAN RV02F25U 

37 Tonne LPG Tow Tug with Canopy. 

K070. TA1041469. 

$24,200 

TOYOTA 035D7 

550KG, 2.05 Metre Lift Diesel Loader. 

F052. TA846888. 

$12,100 

USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 

HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES 

PET-FP-5011641-A


FORKLIFT 

CLEARANCE 

GOOD CONDITION 

SMV32 

32,000KG@1,200MM, 6 CYLINDER 

SCANIA, DANA 

RELIABLE WORKHORSE 

$ 

59,999 +GST 

HYSTER H620B 

28,000KG@1,200MM, MAX LIFT 

6,050MM, CUMMINS C SERIES, AUTO 

RUNS WELL 

HYSTER H6.00XL 

5,200KG@600MM, DIESEL, 2 SPD 

POWERSHIFT, 1,220MM TYNES 

NEEDS TO GO TODAY 

PRICED TO CLEAR 

$ 

39,000 +GST 

HYSTER H520B 

23,500KG@1,220MM, 6,820MM LIFT 

HEIGHT, ALLISON 3 SPEED 

HYSTER H14.00XM-12 

18,000KG@1,200MM, CUMMINS 6 CYLIN- 

DER TURBOCHARGED, AUTO 

OMEGA 54E 

40,000KG@1,460MM, CUMMINS 6 CYL 

DIESEL TURBO 

17 BAKER STREET, BANKSMEADOW 

0429 388 022 

or visit sydneyforklifts.com.au


SKYJACK SJ3219 2012, 

19' Electric Scissorlifts, plenty to choose from. 227kg 

lift capacity all in good condition. In Brisbane, Sydney 

and Melbourne. Machines in test from Mar 2022 to 

April 2022. Various between S19538 - S19605. TA1019568 

$4,400 + GST = $4,840 

SKYJACK SJ9250RT 2011, 

50' Rough Terrain 4WD Scissorlifts with self leveling 

outriggers and dual powered extension decks. 8 

machines in test from Oct 2021 up to Jun 2022. Located 

Bris, Syd & Melb. S5006 - S5013. TA1019562 

$30,000 + GST = $33,000 

GENIE Z34/22IC 

34 4WD diesel Knuckle Booms. 2 machines left and 

these are in test until October 2020. Machines are 

located in Melbourne. KB3487 & KB3488. TA1038334 

$22,000 + GST = $24,200 

JLG 450AJ 2011, 

45' 4wd diesel knuckle booms still in test until 02/21. 2 

units only, ex Brisbane & Mackay. KB45117G & 

KB45118G. TA952642 

$30,000 + GST = $33,000 

JLG 600AJ 

60 4WD diesel Knuckle Booms. 4 machines offered and 

all are equipped with 7kVa on-board generators. These 

machines are all in test from October 2021 until March 

2022 and are all located in our Melbourne Branch. 

KB6062, KB6063, KB6066 & KB6067. TA1033085 

$40,000 + GST = $44,000 

JLG 800AJ 

80 4WD Diesel Knuckle Booms. 7 machines offered and 

all are equipped with 7kVa on-board generators. These 

machines are all in test until June 2021. Located in 

Melbourne, Brisbane, Townsville and Cairns. 

KB8016G7-KB8022G7. TA1045325 

$52,000 + GST 

GENIE S45 

45' telescopic Boomlifts. 5 machines offered and all but 

2 have on-board generators. In test from Feb 2022 until 

Jan 2023. Machines located in Brisbane, Sydney & 

Melbourne. Some of the machines are slightly cheaper. 

B45128 - B45133. TA1019573 

$50,000 + GST = $55,000 

0457 110 110 

sales@skyreach.com.au 

www.skyreach.com.au 

JLG B660SJ 

66' 4WD telescopic Boomlifts. 4 machines offered and 3 

equipped with 7kVa generators. In test from Apr 2022 

until Dec 2022. Located in Brisbane, Townsville & Dalby. 

B6625 - BB6628. TA1019572 

$50,000 + GST = $55,000 

MERLO P38.13 

3.8 ton, 13.0 metre Telehandlers. 5 machines offered. In 

test from Nov 2021 until Feb 2022. Machines located in 

Sydney, Melbourne, Brisbane & Townsville. Some of the 

machines are slightly cheaper. T38131, T38133, 

T38136, T38138, T38139. TA1019584 

$50,000 + GST = $55,000 

PET-FP-5126550-A



WELDING EQUIPMENT 

LINCOLN 305D 

2009, Diesel 

Driven Welder, 

Generator. 

300amp DC 

multi-process 

$12,100 

LINCOLN 

VANTAGE 580 

ENGINE WELDER 

Multiple units fully 

tested, With 

warranty. 

$14,500 

SHINDAIWA 

DGW500 

Diesel Welder, 

Generator. 

$12,500 + GST 

LINCOLN 

VANTAGE 575 

DIESEL WELDER 


Generator. 

from $11,000 + 

GST 

LINCOLN AIR 

VANTAGE 500 


Generator, 

Compressor. 

$23,500 + GST 

MILLER AIRPAK 

Diesel Driven 

Welder, Generator, 

Compressor. 

$25,750 + GST 

OUR USED EQUIPMENT IS SOLD WITH A WARRANTY 

07 3375 4146 

1310 Boundary rd WACOL QLD 4076 

36 Carmel st Garbutt QLD 4814 

WE BUY WE OLD BUY CRANES 

OLD CRANES 

10 TONNE AND GREATER 10 TONNE CAPACITY AND GREATER | ALL CONDITIONS CAPACITY | CONSIDERED 

ALL CONDITIONS CONSIDERED 

We are an Australian We company are Australian who work company on 

who work on 

your behalf to get the your best behalf prices to from get the overseas 

best prices from overseas 

buyers. 

buyers. 

You deal with one You company deal with throughout one company the 

throughout the 

transaction so you dont transaction have to worry so you about dont have the 

to worry about the 

daunting export process. 

daunting export process. 

Please email details Please of email your crane details to: 

of your crane to: 

info@usedcrane.com.au info@usedcrane.com.au or call Dhruv on 

or call Dhruv on 

0411 034 788. 

0411 034 788. 

• Australian Company • Australian Exporting Company cranes since 

Exporting cranes since 

2006 

2006 

• Access to most markets • Access globally to most hence markets we 

globally hence we 

can offer good prices can for offer your good cranes. 

prices for your cranes. 

• Simple transaction • and Simple timely transaction payment 

and timely payment 

• No paperwork requirement • No paperwork from your requirement end so the 

from your end so the 

process is hassle free 

process is hassle free 

urce Australia Trade and Pty Outsource Ltd trading Australia as Used Pty Cranes Ltd trading Australia 

as Used Cranes Australia 

Solent Suite Circuit, 310, Norwest 11-13 Solent NSW Circuit, 2153 

Norwest NSW 2153 

60 + 61 2 9659 8861 1466 1660 + info@usedcrane.com.au 61 2 9659 1466 info@usedcrane.com.au www.usedcrane.com.au 

www.usedcrane.com.au


www.flt.com.au FreeCall: 1800 688 788 Email: sales@FLT.com.au Contact: Michael Carlin 0418 299 555 

Stock located in Sydney, Brisbane, Melbourne, Perth 

OMEGA 54E DCH Stack 40,000kg 20 and 40 

foot containers 4 high. Has reach out, slew, 

sideshift. Air cab. Immediate delivery. R3496. 

TA737296. 

For Sale or Hire POA Freecall 1800 688 788 

KONECRANES SMV SL32-1200B 2011, 

Quality forklift can transport without need to 

dismantle. R3376. TA1038152. 

POA For Sale or Hire Ph:1800688788 

KALMAR DRT450 2013, Only 7411 hours with 

original Cummins engine. Stack 45,000kg 1st 

row 31,000kg 2nd row. Ready Now!. R3603. 

TA998021. 

POA For Sale or Hire Ph: 1800 688 788 

KALMAR DCF370-12 2012, 2 Available and a 

pair of DCF330-12. 2,440mm forks, sideshift, 

fork positioner. Option 20x40 spreader. Mine 

site spec. R3548. TA828696. 

For Sale or Hire POA Freecall: 1800688788 

HYSTER H32.00C Rated 29,000kg to stack 20' 

containers 4 high. Cummins 6CT diesel and 

Clark Hurth 32000 series powershift xmsn. 

R3332D. TA252516. 

Hire or Buy Ph: 1800 688788 $99,000 

HYSTER H18.00XM-12 2008, 18,000kg highcube 20' 

containers 3 high with 2440 forks + fork positioning 

sideshift. Option 14,000kg with ELME 558 Sidelift for 20' 

and 40' highcube. R3282. TA511086. 

For Sale or Hire POA $FreeCall 1800 688788 

OMEGA 36D 2010, stack highcube 20' 

containers 3 high. Enclosed air conditioned 

cab, excellent condition ready for delivery. 

R3467. TA737310. 

For Sale or Hire POA FreeCall 1800688788 

OMEGA 7ECH Twin Picks and stacks 20x40 

empty containers 7 high. Similar 5/6 high low 

hour Kalmars also in stock. R3355. TA400307. 

For Sale or Hire POA Ph 1800 688 788 

HYSTER H18.00XM-12 2008, Stacks highcube 

20' & 40' 4 high. ELME 558 20x40 spreader 

with top entry twistlocks. Front line unit ready 

for immediate delivery. R3547. TA829125. 

For Sale or Hire POA FreeCall 1800688788 

MOBICON 33T Load Unload up to 33,000kg 

20 and 40 foot shipping containers. For sale & 

Wanted. R3299. TA148664. 

For Sale or Hire Ph: 1800 688788 POA 

PRENTICE 7,000KG SWL Forklift ramp. Ideal 

for shipping containers for sale or hire. Ph: 

1800 688 788. R 3274. TA96974. 

$12,000 + GST = $13,200 For Sale or Hire 

www.FLT.com.au FreeCall: 1800 688 788 

HYSTER H32.00F Stacks 32,000kg 20' 

highcube containers 3 high. R 3389. TA394069. 

For Sale or Hire POA 

PET-FP-5011476-B


30 years 

Oliver Ph: 0475 633 959 | Andrew Ph: 0417 413 129 

Chemical Handling Technology and Equipment 

Fertiliser Application Systems, Pumps, Reels and Hose 

Retractable 12V Hose Reels 1 in. to 3 in. Honda 3” Cast Iron Wet Seal Trans. pumps Swing Down Chemical Induction Hoppers 

Liquid Fertiliser BLOCKAGE MONITORING and Rate Control 

Exclusive Monitoring system for Air Drills and Planters 

Liquid Fertiliser Application Systems - Dual Metering Tube for 

Improved application range - Integration with all platforms 

QuickDraw MAX Automated chemical handling system, mix and 

batch chemical at the touch of a button 

Semi Automated Chemical handling, simplify mixing and loading 

chemical into you sprayer - competitive pricing 

www.ajsmachinery.com.au


DIESEL ENGINES Pty Ltd 

New and Used Diesel Engines and Generators 

Brett: 0408 781 735 

Sunny: 0418 781 835 

E-mail: sales@diesel-engine.com.au 

Address: 30 Paringa Road, Murarrie QLD 4172 

JOHN DEERE/NORTHERN 

LIGHTS MARINE GENERATOR 

- 120KVA – 1140HRS 

CATERPILLAR C7 MARINE 

ENGINE – RUNNING TAKEOUT 

- 461HP @ 2300RPM 

CATERPILLAR 3406 MARINE 

ENGINE – DISMANTLING 

LARGE NUMBER OF USED 

RUNNING AND PARTS 

GENERATORS IN STOCK 

CUMMINS 6BT5.9G2 

100KVA SILENT GENERATOR 

WITH STAMFORD 

ALTERNATOR - NEW 

CUMMINS 6BTA5.9G2 

125KVA SILENT GENERATOR 

WITH STAMFORD 

ALTERNATOR - NEW 

CUMMINS 6CT8.3 610HP 

HYRDAULIC POWER PACK W/ 

MURPHY PANEL 

– USED


FW&RBCRIGHTONRURALENGINEERINGPTYLTDtradingas 

Heavy Duty Outdoor Fire Bucket 

If you are looking for a fire bucket... for your 

9 year old daughter's birthday party, you 

should go to Bunnings. 

RURAL ENGINEERING Pty Ltd 

Cnr Nailor & Moama St, Hay, NSW, 2711 

Ph:02 6993 1768 Fax:02 6993 3042 

MOB: 0428 931 768 

 

“NEW”SPIRALWELDSTEELPIPE 

100–1800NBAssortedwallthickness,POA 

 

If you want a 

Fire Bucket / 

Pit which will 

make you 

mates weak 

at the knees, 

have a look 

at this. 

BULK 

ORDERDISCOUNTS 

$900 

“NEW”BLACKPIPE 

4.5mm(114mmOD)2.4&3mlengthsfrom$47+GSTeach 

3.5mm(88.9mmOD)2.4&3mlengthsfrom$40+GSTeach 

PUMPSETS 

4”36”Pumpsets 

Diesel&Electric 

ALLTERRAINCOLESHYDRACRANE 

Goodclearance4WD,mechanically 

sound,goodtyres&roadspeed. 

18mboom,currentlynotregistered. 

$29,000 

ALLENQUIRESph0269931768orcallJasen0428931768 

PET-FP-5176479-CS-289


USED CRANES WANTED 

NO 10 YEAR 

NO PROBLEMS 

We purchase Used Cranes 

direct which means we are 

not a Broker to organize a 

deal for you, if you have a 

used crane to off load or 

surplus cranes please call us. 

If you are looking to trade 

in or willing to buy a used 

late model crane we can 

definitely help you in that. 

TRUCK MOUNTED CRANES RANGE: 

TADANO/KATO/P&H /HITACHI 

From 20 Tonne to 100 Tonne 

CASH PAID 

FOR CRANES 

ROUGH TERRAIN CRANES RANGE: 

TADANO/KATO 

From 25 Tonne TO 50 Tonne 

CRAWLER CRANES RANGE: 

P&H/KOBELCO/SUMITOMO/HITACHI 

ALL MODELS ACCEPTED 

ALL TERRRAIN CRANES RANGE: 

FROM 80 TONNE TO 500 TONNE 

All Conditions are considered, 

Damaged Cranes are also 

considered. 

WE COME TO YOU! 

Please send enquiries on 

info@affconstructionequipment.com.au 

PET-HH-5180284-TS-291 

RING FRED KHAN ON 0402 068 319


A.C.N. 086 652 226 

Generators New & Used 

CATERPILLAR, CUMMINS, DETROIT, VOLVO, 

LISTER, ENGLISH ELECTRIC DORMAN, DEUTZ, 

PAXSMAN, FORD, RUSTON, TURBINES 

FG WILSON P220-3-CAE 

FG Wilson, 220kva, battery charger and water jacket heater, fuel 

tank base. Ex hospital standby set with low hours. Comes with bulk 

tank and muffler. S228. TA1045169. 

$26,000 

CATERPILLAR 400KVA 

10,000 hours, maintained by caterpillar since new, all required 

maintenance has been done. Has been load tested and is ready to 

work. S216. TA1024753. 

$39,000 

CUMMINS 165 KVA 

Cummins 165kva, 5000hours, full service history from new, fuel 

tank base, muffler and sound reduced canopy. Load tested and 

ready to work. Call Scott 0400 658 496. S224. TA1040691. 

$28,000 

FG WILSON P200-3 

FG Wilson, 200kva, fuel tank base, muffler and sound reduced 

canopy. Load tested and ready for work. 

S226. TA1043891. 

$12,000 

1166 Wellington Road Narre Warren East, Victoria, Australia 3804 

Darren: 0418 364 166 | aaamachinery@yahoo.com.au 

PRAMAC P6000S 

Pramac 6kva diesel generator, single phase, three outlets, fuel tank, 

muffler mounted in sound reduced canopy. Load tested and ready to 

work. S227. TA1044322. 

$5,000 

ALLIS-CHALMERS 130KVA GENERATOR 

Allis-Chalmers / Woodard 130kVA Generator, 1145 Hours, Governor 

Engine Protection, Main Circuit breaker, Radiator Cooled Muffler, 

Mounted on Skid-Base. S175. TA954899. 

$8,000 

WE BUY GENERATORS 

Scott: 0400 658 496 | scott@stcontractingvic.com 

PET-HH-5011243-A 

19-29 Curlew Cresc 

Tamworth NSW 2340 

www.philhuntparts.com.au 

brendan@philhuntparts.com.au 

FIAT 70CI Just in for Dismantling, Undercarriage 70% All 

Round, Rear Rippers, Good Running Engine, Hydraulic 

Angle Tilt Blade, Tree Pusher, All Parts Available, Phone 

Brendan 02 6762 4466. S140. TA1035748. 

POA 

ALLIS HD6E Just in for Dismantling, Undercarriage 80% 

All Round, Wet Engine Clutch, Rear Rippers, Angle Blade 

and Tree Pusher, All Parts Available, Phone Brendan 02 

6762 4466. S137. TA1035747. POA 

PHIL HUNT 

PARTS 

RING ALL HOURS 

NEW AND S/H PARTS 

ALLIS-CHALMERS/HANOMAG/MASSEY 

JOHN DEERE INDUSTRIAL 

PARTS FOR Dozers, Loaders, Drotts, 

Graders, Scrapers 

WRECKING DOZERS 

ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G, 

HDIIB, EP, 

HD15-16, HD16DC, HD16DP, HD19-21, HD41B 

FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B, 

BD10B, FD10E, BD20 

HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C, 

L600C, D600D Super, D700C 

JOHN DEERE : 1010C, 850 

LOADERS 

ALLIS-CHALMERS: TL12D, TL14, TL20, 545, 

605B, 645, 745B,C 

FIAT: FR20B 

LD3, LD5, LD7 & LD9 Scoopmobile 

HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77 

GRADERS 

ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A, 

B, FG95 

DRMCO/CHAMPION 562, 600, 720, 740 

JOHN DEERE 570, 570A, 670A, 770, 770A, 772A 

ALLIS WHEEL TRACTORS 

AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080, 

8010, 8050, 8070, 7580, 8550, 440 

ALSO AVAILABLE 

Track Chains, Rollers, Idlers, Sprockets 

Various 4-1 Buckets, POA 

A/H: (02) 6762 4466 

Ph: (02) 6762 4466 

Fax: (02) 6762 4555 

Mobile: 0429 624 144 

HANOMAG 33C Just in for Dismantling, Quick Hitch 

Bucket, Quick Hitch Forks, Diff and Trans in Good Order, 

All Parts Available, Phone Brendan 02 6762 4466. S135. 

TA1035746. 

POA 

JOHN DEERE 670D GRADER Just in for Dismantling, 12 

Foot Moldboard, Rear Rippers, 6068H Engine, DF180 

Transmsission, 14:00 x 24 Rims & Tyres, Low Hour 

Machine, All Parts Available. Phone Peter 02 6762 4466. 

S125. TA974288. POA 

Allis Chalmers • Fiat Allis • Hanomag • Massey • JD Industrial 

EMM-HH-5132462-B


ABN 55 128 894 146 

WOLLONGONG 

CATERPILLAR TRACK 

LOADER 953C 

Recently re-painted. 12,859 

Hours, Multi Shank Ripper, 

4 in 1 Bucket, Air Con, 

Service Records, 

Great Tidy Machine - Ready 

for Work 

TA1028920. 

$92,000 

KOBELCO SK260LC-8 

2011, 10,294 Hours, 

Recently Serviced, Hyd Q/C 

Bucket, 2900mm Stick, Aux 

Hyd Check valves, A/C, 

E-Stops, Safety Rails. 

TA1027375. 

$85,000 

CATERPILLAR D6T XL 

2009, Dozer, 9123 Hours, 

Air Con, Rear View Camera, 

Pre wired for Grade Control 

& Topcon GPS, Powershift 

Transmission. TA1039182. 

$220,000 

CATERPILLAR 725 

Articulated Dump Truck 

2009, 14,857 Hours, 80% 

Tyres, Recently Serviced. 

TA1028896. 

$115,000 

CATERPILLAR 432E 

BACKHOE 

2010, 5490 Hours, 4WD 

sideshift, recently serviced. 

TA1043019. 

$85,000 

CATERPILLAR 12M GRADER 

2009, 9187 Hours, Trimble 

system, recently serviced. 

TA1043171. 

$175,000 

SHEPHARD TRI-AXLE 

CHASSIS TIPPING TRAILER 

2006, Shephard Tri Axle 

Trailer. Bisalloy Body, 2 Way 

Gate, Asbestos Transport 

Approved, Electric Tarp. 

TA1019195. 

$55,000 

ISUZU FSS550 

2001, Water Cart. 5000 Litre 

tank with pump & hose reel. 

241,000kms. 4WD. 6 Speed 

Manual. Fire Extinguisher. 

Toolbox. Recently Serviced. 

TA1033496. 

$45,000 

All equipment serviced prior to release. Delivery options available Australia wide. 

Large range of Trucks, Utes, Machines, Attachments, Tools & Pumps available. 

EMM-FP-5211437-A 

Ray Collings 0475 005 366 or (02) 4294 8035 

www.triclarkbrothers.com.au sales@triclarkbrothers.com.au


www.liftek.com.au 

0447 64 33 23 

Griffith, NSW 

E: sales@liftek.com.au 

SNORKEL AND TRAILER PACKAGES Various S1930, 

1930ES Genie 1932 available, new and used trailers 

available, call for more info. S34. TA819706. $13,950 

TOYOTA 32-8FG30 3.0 TON 2013, 4.0M Lift Height, Side 

Shift, Solid Tyres. Ready for work. S64. TA992172. 

$13,500 + GST 

FORWARD BIN TIPPER New and Used available, call for 

more info. S6. TA653780. 

$4,000 + GST 

TOYOTA 7FBE18 ELECTRICS 1.8 ton lift capacity with 3 

stage mast, also available 7FBE20 with container mast, 

call for more info. S21. TA731606. $12,100 

RAYMOND DOUBLE DEEP REACH TRUCK Various lift 

heights available, call for more info. S31. TA794716. 

$9,900 

TOYOTA 32-8FG30 3 TON 3 Stage Container Mast, Side 

Shift Solid Tyres. Fully Serviced. S68. TA1001248. 

$16,000 + GST 

TRUCK WASH TWR 35 Brand new, 500ltr tank, 2100mm brush 

width, chemical regulation. Only requires one hydraulic forklift 

function. Will clean a B-Double in 10 minutes. S63. TA988194. 

$8,500 + GST 

TOYOTA 32-8FGK25 2.5 TON COMPACT 3 Stage 

Container Mast, Side Shift. Serviced ready for work. 

S67. TA1001247. $15,900 + GST 

JLG E400 ELECTRIC KNUCKLE LIFTS with 

recertification ready for work. Call for more info. S3. 

TA653777. 

$28,900 + GST 

Over 80 Forklifts, scissorlifts, telehandlers to choose from 

PET-FP-5208733-A


Heavy Duty Universal 

Milling Machine 

BM-1600 

$ 

51,950 

ex-GST 

(M639D) 

X 1200mm 

Y 700mm 

Z 500mm 

BM-2000 

$ 

57,950 

ex-GST 

(M640D) 

X 1400mm 

Y 700mm 

Z 500mm 

3-Axis digital readout fitted 

1600 x 500mm slotted work table 

(BM-1600) 

2000 x 500mm slotted work table 

(BM-2000) 

NT50 universal head swivels 360º & tilts 

Hardened & ground table & all slideways 

Hardened & ground transmission gears 

Electric brake & rapid feed on X, Y & Z-Axis 

Servo controlled feed motors on X, Y & Z-Axis 

Hardened ballscrew X, Y & Z-Axis 

Dovetail X-Axis & wide square for Y & Z-Axis 

Rigid, torsion-proof construction 

All slideways are automatically lubricated 

Includes 

Digital Readout System 

Servo Driven Ballscrew 

System X,Y, ZAxis 

This extra heavy-duty BM-1600 universal milling machine NT50 spindle taper is built with ultra-high precision 

hardened pre-loaded ballscrews in X, Y & Z axis that will provide accuracy for many years to come. Another 

superior feature that is included standard with this massive beast of a machine is the servo-controlled feed 

system to ensure constant torque when removal metal under extreme load. All this is combining with and 

extra-large hardened & ground working table with extremely long travels to match. 

To sum it all up, If you require to remove large quantities of metal from big & heavy jobs, and need a machine to 

maintain its capabilities from start to finish, then this universal milling machine is what you need. 

Includes 

4 Safety cutter guard 4 Automatic oil lubrication system 4 

4 Coolant system 4 Cast iron table extensions 4 

LED light 

Base swarf tray 

SYDNEY 

(02) 9890 9111 

1/2 Windsor Rd, 

Northmead 

BRISBANE 

(07) 3715 2200 

625 Boundary Rd, 

Coopers Plains 

MELBOURNE 

(03) 9212 4422 

4 Abbotts Rd, 

Dandenong 

PERTH 

(08) 9373 9999 

11 Valentine St, 

Kewdale 

VIEW AND PURCHASE THESE ITEMS ONLINE AT www.machineryhouse.com.au 

Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 28-09-20 

09_P&E_310820


69 LOUDOUN ROAD 

DALBY, QLD 4405 

Yard Phone (07) 4662 0900 

Mobile Phone 0417 617 461 

Fax (07) 4662 0911 

Email: thomastrading@bigpond.com 

www.thomasmanufacturing.com.au 

THOMAS STANDARD BATCHING PLANT WITH DIESEL ENGINE & PLATFORM Various models available. 

THSBPWDP. TA319287. MADE TO ORDER. PRICES START FROM $102,487.00 + GST = $112,736 

THOMAS DOUBLE 

TROMMEL 

2 barrel screening 

trommel with 8m³ feed 

hopper complete with 

1,500mm feed belt - 

trommel feed conveyor 

12m x 1,200mm. 

77635. TADPLIn77635. 

Quoted to Customer 

Spec POA 

THOMAS RADIAL 

STACKER 

15m x 900mm wide 

hydraulic drive 

hydraulic raise & lower. 

TRS15MX900. TA114185. 


Spec POA 

THOMAS 8 X 4 2 DECK 

SCREEN 

This is a sample of 

small screen boxes that 

we can manufacture on 

order. TH8X42DS. TA250778. 


Spec POA 

THOMAS FEED HOPPER 

20 CUBIC METER 

With 900mm wide feed 

conveyor. TH20900. 

TA122049. 


Spec POA 

PET-F-GMAI-5059125-A


CONCRETE 

6MTR HYDRAULIC 

CONCRETE BOWL 

S31 TA1046287. 

$4,800 ONO 

ASSORTED CASE 580 

BUCKETS 

S30 TA1046286. 

$500 EACH ONO 

35 TON SILO S2. TA1039931. $5,000 ONO 

DRAW BAR SLIGHT BEND . S26. TA1046281. 

$2,500 ONO 

FORD L8000 CAB CHASSIS 6cyl Diesel. S10. TA1040015. 

$6,000 ONO 

KIBBLE 0.5 METRE S14. TA1040017. 

$300 ONO 

COMPAIR COMPRESSOR Low hours. S23. TA1041933. 

$3,500 ONO 

HINO Very clean. S24. TA1041934. 

$35,000 ONO 

KOMAKI CONCRETE CUTTER Cuts 6 inch, goes well. S25. 

TA1041936. 

$3,000 ONO 

WHIPPET ROADSTER 1927, neat/tidy new batt. S27. 

TA1046283. 

$19,500 ONO 

TOILET BLOCK 2 pans, 1 urinal, hand basin. S22. 

TA1041932. 

$4,500 ONO 

COMPRESSOR AIR 

175CFM 

S29 TA1046285. 

$2,500 ONO 

BATCH PLANT 

35 tonne silo on load cells, 

6mtr bin truck available if 

required. S28. TA1046284. 

$85,000 ONO 

3 Gellie St, Camperdown, VIC, 3260 

Robert Case 0407 362 298 

EMM-FP-5211668-A


AUSTRALIA’S 

LARGEST FORKLIFT 

WHOLESALER 

BT RRE160M 

Hours: 

5,440 

Unit No: 

FU09459 

Neat, low hour machine, with a 

vacuum head attachment. 

$8,000.00 INC GST 

1300 438 3675 

formidableforklifts.com.au 

6/220-230 Barry Rd, Campbellfield (03) 9357 6291 

Sales@formidableforklifts.com.au



tradeplantequipment.com.au/sell 1300 362 272 

HAYZ PORTABLE 

ACCOMMODATION 

MODULAR, 82M2 SOLUTIONS.These buildings have 

been rigorously inspected by both Australian and 

New Zealand building authorities and are compliant 

to Australian Building Codes. This mining series has 

excellent sound and thermal insulation. Located in 

Chinchilla, QLD. For more information please 

contact Bernhard on 0403 041 051 or Jade on 0403 

599 028, .. QLD. DIY1045487. 

0403 599 028. 

$64,900 Incl GST (2 

Available) 

GRACO XM PFP 

Pump and container. Located in Western Sydney, .. 

NSW. DIY960730. 

0412 249 163. 

$60,500 

SELL YOUR 

TRUCK 

VISIT TRADETRUCKS.COM.AU/SELL 

OR CALL 1300 362 272 

NEW COMPULOAD 

SCALES & PRINTER FOR 

ON BOARD WEIGHING! 

Made in Australia 

Static weighing 

Dynamic weighing 

Full data management 

Subtract function 

Split load function 

Can be fitted to all types of machines 

Optional USB Downloading (6000 only) 

Large LED backlight display 

Fully automatic 

Simple to use 

Improves profitability 

Fast accurate weighing 

Optional printer available 

1800 285 277 

www.compuload.com.au 

AVAILABLE NATION-WIDE.




SYMONS 7FT MANTLES X2, .. QLD. DIY540212. 07 4950 5307. 

0427 775 466. $12,000 PLUS GST 

BALL MILL 30ft x 6ft, .. QLD. DIY540209. 07 4950 5307. 

0427 775 466. $45,000 PLUS GST 

SAND DRYER Gas powered, on stand. Good order. 40T/HR, 

7.5m x 1,600mm, working when pulled down, .. QLD. 

DIY496592. 07 4950 5307. 0427 775 466. $35,000 plus GST 

KUE KEN 48 X 36 JAW CRUSHER On stand with feeder & 

scalper, refurbished. Ph 07 4950 5307 or 0427 775 466, .. 

QLD. DIY957170. 07 4950 5307. 

$500,000 + GST 

CATERPILLAR D6 TRACK ROLLERS Believed to fit a D6 Cat 

Dozer, set of 6. Please call 0427 775 466, .. QLD. DIY857141. 

07 4950 5307. $1,200 + GST 

SYMONS 7FT CONCAVE ., .. QLD. DIY540214. 07 4950 5307. 

0427 775 466. $7,000 PLUS GST 

MINYU MS3624 JAW CRUSHER 36 x 24, 16 new plates & 

4 cheek plates. Phone 0427 775 466, .. QLD. DIY1046184. 

07 4950 5307. $40,000 + GST 

EL-JAY ROLLERCONE 54 CRUSHER With Stand & Electric 

motor & starter. Phone 0427 775 466, .. QLD. DIY1046181. 

07 4950 5307. $65,000 + GST 

LINDE H18 Gas Powered H18 Forklift for sale, 

H2X350N02854. QLD. DIY1042943. 0417 726 798. $9,600 

TYRE HANDLER KOMATSU WA600-1 Plus all Controls. 

Phone 0427 775 466, .. QLD. DIY1046192. 07 4950 5307. 

$10,000 + GST 

FEEDER BELT 30X4 FT HYDRAULIC DRIVE Phone 0427 

775 466, .. QLD. DIY1046189. 07 4950 5307. $10,000 + GST 

MINYU MS4230 JAW CRUSHER 42 x 30 S T Jaw Crusher. 

Good order, 4 spare jaw plates & 2 cheek plates. Phone 

0427 775 466, .. QLD. DIY1046187. 07 4950 5307. 

$50,000 + GST 

SKYJACK SJ6826 RT 2020, Scissor Lift, 37014831. QLD. 

DIY1043822. 0417 464 616. $66,000 

STEEL AND ALUMINIUM EDGE PROTECTION SYSTEM 

Roof Edge Protection System, 151958PZBI. QLD. 

DIY1043820. 0417 464 616. $125,000 

REDUCTION BOXES BREAKER DRIVERS Fully rebuilt. 2 x 

available - Phone 0427 775 466, .. QLD. DIY1046194. 

07 4950 5307. $5,000 + GST




CRUSHING PLANT SKID BASED 42x27 Brown Lenox Jaw, 

1500 Kawaski gyro, 16x6x2 Allis Chalmers screen, 4ft 

Symons standard gyro, 750KVA Gen. set Cummins Stanford 

all electric. QLD Ph 07 49 505 307 or 0427 775 466, .. QLD. 

DIY957171. 07 4950 5307. 

$875,000 + GST 

WABCO 50B Dump truck x 2. Parts only. Good 1710 

Cummins motors x 2. Mob: 0427 775 466, .. QLD. DIY496585. 

07 4950 5307. $20,000 plus GST 

NAKAYAMA CRUSHER FEEDER 9ft x 30inch, unused. Mob: 

0427 775 466, .. QLD. DIY618643. 07 4950 5307. 

$10,000 PLUS GST 

NISSAN F04B40HUT 2004, 4 TONNE, 4.5 metre lift, 

F29C - 055023. VIC. DIY1043523. 0408 506 834. $9,999 

ALFA LAVAL MAB-103 Alfa Laval centrifuge, MAB-103. 

QLD. DIY1045506. 0457 665 881. $18,500 

LINDE H18 Diesel Powered, C1X350U00198. QLD. 

DIY1042944. 0417 726 798. $13,800 

KUBOTA D902-SAO 2013, 3 Cylinder 26 HP 3,600 RPM 3" 

wet 1 pump Head 60 mtrs PSI 82. 2000L per minute 

CHEAP! brand new, D902-SAO. QLD. DIY1000008. 

0418 460 650. $8,000 

CATERPILLAR 992C 1985. Wrecking for parts, .. QLD. 

DIY645033. 07 4950 5307. 

POA 

CUSTOM MADE CUSTOM MADE SKIP BINS x 10 - Heavy 

Duty, 151958PZBI. QLD. DIY1043823. 0417 464 616. $65,000 

SELL YOUR TRUCK 

TRADETRUCKS.COM.AU/SELL OR CALL 1300 362 272 

HYSTER H520B 

24tonne lift capacity. Upgraded with Cummins 6CT engine. 

Reco'd Allison auto transmission. Will stack 2 high and is 

transportable without dismantling. Various other machines 

available. Spreaders & attachments to suit 520B also available., .. 

VIC. DIY754663. 0418 558 600. 

$99,000 Incl GST 

NOW OPEN! YOUR NEW ONE-STOP TRUCKING SHOP. 

All the latest news & reviews, industry jobs and new & used trucks for sale 

visit www.fullyloaded.com.au


tradefarmmachinery.com.au/sell 1300 362 272 

Powered by 

CHOOSE YOUR AD PACKAGE 

Tick the circle to select your 

package. Each package includes 

1 print issue in Farms & Farm 

Machinery and until sold on 

tradefarmmachinery.com.au. 

VALUE ..............$35 

Print size: 1/36 Page 

Paper: Newsprint colour 

Wed Ad Type: Standard 

PREMIUM .......$55 


Paper: Newsprint colour 

Wed Ad Type: Premium 

GRAND .............$85 


Paper: Gloss 


JUMBO .......... $130 


Paper: Gloss 


MONSTER .... $280 


Paper: Gloss 


MEGA ............ $750 


Paper: Gloss 


Price includes GST 

PRINT: 

MAX 25 

WORDS 

PRINT: 

MAX 25 

WORDS 

PRINT: 

MAX 25 

WORDS 

PRINT: 

MAX 35 

WORDS 

PRINT: 

MAX 50 

WORDS 

PRINT: 

MAX 95 

WORDS 


MAKE AND MODEL 9 metre cut, quick release, 

folding wings, V8 twin turbo, REG. STATE. 

DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 

SELL YOUR 

FARM 

MACHINERY 

MAKE AND MODEL 9 metre 

cut, quick release, folding 

wings, V8 twin turbo, REG. 

STATE. DIYXXXXXX. PH 

$PRICE 





$PRICE 




DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 





$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 

VISIT THE WEBSITE 

OR CALL 1300 362 272 





$PRICE 

PREMIUM 





$PRICE 

NEWSPRINT 

GRAND 

GLOSS 

VALUE 

NEWSPRINT 





$PRICE 

ADVERTISEMENT DEADLINE 

Issue: 389 Deadline: Tue 25/08/2020 5pm On Sale: Thu 10/09/2020 

Issue: 390 Deadline: Tue 22/09/2020 5pm On Sale: Thu 08/10/2020 


MAKE AND MODEL 

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone 

$PRICE 


9 metre cut, quick release, 

folding wings, V8 twin turbo, 

REG. STATE. DIYXXXXXX. Phone 

$PRICE 


MONSTER 

GLOSS 





$PRICE 

MEGA 

GLOSS 

JUMBO 

GLOSS 





$PRICE 

1 item per ad space regardless of ad size 

Details 

PAYMENT DETAILS & CONTACT DETAILS 

Have you included your photo(s)? 

Year: ___________________________________________________________________ 

Make: ___________________________________________________________________ 

Model: __________________________________________________________________ 

Kms: ____________________________________________________________________ 

Extras: __________________________________________________________________ 

________________________________________________________________________ 

________________________________________________________________________ 

________________________________________________________________________ 

Phone No. _______________________________________________________________ 

Reg/Eng No./Vin No. _______________________________________________________ 

Only one Required by law 

________________________________________________________________________ 

Price $ __________________________________________________________________ 

Required by law 

Must be GST inclusive price 

Please see the Marketplace Pages for location of Privacy Notice. 

Please do not provide information about me to any organisation not associated with this publication. 

I enclose $ ____________ ____ 

Cheque / Money Order / Credit Card 

Payment for the above advertisement. 

BANKCARD 

MASTERCARD 

VISA 

Expiry Date: ___________________________________________ 

Signed: _______________________________________________ 

Amount: ______________________________________________ 

Please include a cheque or money order or credit card details 

YOUR NAME ____________________________ 

ADDRESS _______________________________ 

STATE___________ POSTCODE ______________ 

EMAIL __________________________________ 

Signed: _________________________________ 

(Not for publication) 

By signing this form you acknowledge that you have read and understood the 

advertising Terms & Conditions as stated at http://www.diyads.com.au/DIY/DIY020.aspx 

The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Bauer Media Ltd advises buyers 

beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Bauer Media Ltd customer services on 1300 362 272 if they 

suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Bauer Media Ltd (The Publisher) shall not be held liable or responsible. 

Locked Bag 12, Oakleigh, Vic 3166 

1300 362 272 privateads@bauertrader.com.au 

tradefarmmachinery.com.au/sell

Issue 389 index 

Active Machinery (VIC) ....................................................................... 68 

AFGRI Equipment Australia (WA) ....................................................... 47 

Agco Australia Limited (VIC)................................................COVER, 124 

Ag-Pride Australia Pty Ltd (NSW) ....................................................... 31 

Agriparts Direct Pty Ltd (QLD) ............................................................ 66 

Agrison Pty Ltd (VIC)..................................................................... 32, 73 

All Diesels (QLD).................................................................................. 72 

Black Truck & Ag (QLD) ................................................................. 43, 79 

Brisbane Mini Excavators (QLD)......................................................... 30 

BYPY Transmissions (VIC)................................................................... 22 

Intersales Temora (NSW) ............................................................51 

Lyndoch Motors (SA) ..................................................................88 

Rocky River Ag Services (SA)......................................................89 

Castrol Australia (NSW) ........................................................................ 3 

CJD Equipment (WA)............................................................................. 7 

Claas Harvest Centre Colac (VIC)....................................................... 81 

Cobram Farm Equipment (VIC) .......................................................... 90 

Cobram Farm Equipment (VIC) .......................................................... 94 

Daken ASV (NSW)............................................................................ 5, 12 

Dieci Australia (NSW) .......................................................................... 26 

Echuca Rural (VIC) .............................................................................. 84 

EL-Gra Engineering (NSW) .................................................................. 37 

FAE Australia Pacific Pty Ltd (VIC) ........................................................ 9 

Farmgard Pty Ltd (VIC).................................................................. 19, 78 

G & J East Kadina (SA)......................................................................... 78 

Geronimo Farm Equipment Pty Ltd (NSW) ........................................ 13 

Grainrite (VIC)...................................................................................... 18 

Greg Allan Farm Machinery (VIC)....................................................... 17 

GWS Machinery (NSW) ....................................................................... 89 

Heavy Vehicle Industry Australia (QLD)........................................ 29, 63 

Hicks Machinery (VIC)......................................................................... 88 

Inlon Pty Ltd (NSW) ......................................................................... 8, 10 

Jadan Enterprises (NSW) .................................................................... 20 

JB Scott Proprietary Ltd (VIC) ............................................................. 49 

JJ O'Connors and Sons Pty Ltd (VIC) .................................................. 45 

JNR Engineering (VIC) ........................................................................... 1 

John Shearer Pty Ltd (SA) ................................................................... 21 

Kioti (VIC)........................................................................................... 123 

Loxton Engineering Pty Ltd (SA)......................................................... 90 

Massaro Motors (VIC)......................................................................... 84 

Maxximus Farm Equipment (VIC)....................................................... 81 

McDonald Murphy Machinery Pty (QLD) ........................................... 52 

Muller Fabrications (QLD)................................................................... 41 

Olympus Loaders (QLD)...................................................................... 59 

Pickman Equipment (VIC)................................................................... 74 

Poole & Jackson Pty Ltd (VIC)............................................................. 88 

Powerace Pty Ltd (WA)....................................................................... 65 

Private Advertising Coupon ............................................... 120 

Rebel Equipment (NSW) ..................................................................... 65 

Robinsons of Bookham (NSW) ........................................................... 85 

Rocca Industries (QLD) ....................................................................... 57 

Rural Wrecking Co (NSW) ................................................................... 87 

Sammut Agricultural Machinery Pty Ltd (NSW)................................. 80 

Shell (VIC) .............................................................................................. 2 

Smallaire (VIC)..................................................................................... 78 

TVK Group (SA).................................................................................... 23 

Veldonas (VIC)..................................................................................... 70 

WA Farmers (WA) ............................................................................... 25 

Wrights Tractor Sales & Service (SA).................................................. 75 

Issue 329 index 

Diesel Engines Pty Ltd (QLD) ............................................................ 107 

A One Lift Truck Services (NSW)................................................. 100 

AAA Machinery (VIC) ........................................................................ 110 

AFF Equipment Pty Ltd (VIC) ............................................................ 109 

AJS Machinery (NSW) ....................................................................... 106 

Allis Chalmers Australia (NSW)......................................................... 110 

Atlas Weighing (NSW) ....................................................................... 117 

Bodasa Pty Ltd (VIC) ......................................................................... 115 

Brisbane Welder Repairs & Rentals (QLD) ................................. 104 

Diesel Parts & Service 

Diesel Parts & Service Pty Ltd (QLD) .......................................... 194 

Forklift Traders (NSW) ....................................................................... 105 

Formidable Forklifts Pty Ltd (VIC)..................................................... 116 

FW & RB Crighton Pty Ltd (NSW)...................................................... 108 

Hare & Forbes (SYDNEY) (NSW) ....................................................... 121 

Liftek Australia (NSW) ....................................................................... 112 

NKF Group (QLD)................................................................................. 99 

Phil Hunt Parts (NSW) ....................................................................... 110 

PR POWER PTY LTD (WA).................................................................. 103 

Price & Speed P/L (NSW).................................................................. 101 

Skyreach Pty Ltd (QLD) ..................................................................... 102 

Thomas Manufacturing (QLD) .................................................... 114 

Tri Clark Brothers Pty Ltd (NSW)....................................................... 111 

Used Cranes Australia (NSW) ........................................................... 104 

www.tradefarmmachinery.com.au 

*Dealer and private stock items listed as at Feb 2016. 

TERMS AND CONDITIONS 

Acceptance of all advertising is subject to review and approval by management, the publisher reserves the right to edit, revise or reject any 

advertisements for any reason. The Publisher’s liability for damages resulting from errors in any advertising that it publishes or from its failure 

to publish any advertisement that it has agreed to publish shall be limited to the amount it actually received in consideration for its agreement 

to publish the advertisements in question. The Publisher shall not be responsible for any special, incidental or consequential damages suffered 

by any party resulting from its errors and/or omissions. The advertiser accepts all liability for the content of all advertising supplied by it and 

agrees to defend, indemnify and hold harmless the Publisher from any and all claims. All photographs become the property of Bauer Media Ltd. 

For dealer and commercial advertising these terms and conditions should be read in conjunction with the terms, conditions, warranties and 

indemnities published in our dealer and commercial rate cards. 

The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers 

are solely responsible for their own negotiations and transactions with advertisers. Bauer Media Ltd advises buyers beware of negotiating by 

email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or 

overseas. Buyers should contact Bauer Media customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the 

event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Bauer Media Ltd (The Publisher) 

shall not be held liable or responsible. 

PRIVACY NOTICE 

This issue of Farms and Farm Machinery is published by Bauer Media Pty Ltd (Bauer). 

Bauer may use and disclose your information in accordance with our Privacy Policy, including to provide you with your requested products 

or services and to keep you informed of other Bauer publications, products, services and events. Our Privacy Policy is located at www. 

bauer-media.com.au/privacy/ It also sets out on how you can access or correct your personal information and lodge a complaint. Bauer may 

disclose your personal information offshore to its owners, joint venture partners, service providers and agents located throughout the world, 

including in New Zealand, USA, the Philippines and the European Union. 

In addition, this issue may contain Reader Offers, being offers, competitions or surveys. Reader Offers may require you to provide personal 

information to enter or to take part. Personal information collected for Reader Offers may be disclosed by us to service providers assisting 

Bauer in the conduct of the Reader Offer and to other organisations providing special prizes or offers that are part of the Reader Offer. An 

opt-out choice is provided with a Reader Offer. Unless you exercise that opt-out choice, personal information collected for Reader Offers 

may also be disclosed by us to other organisations for use by them to inform you about other products, services or events or to give to other 

organisations that may use this information for this purpose. 

If you require further information, please contact Bauer's Privacy Officer either by email at privacyofficer@bauer-media.com.au or mail at 

Privacy Officer Bauer Media Pty Ltd, 54 Park Street, Sydney NSW 2000. 

www.bauertrader.com.au 

DEALER ADVERTISING 1300 362 355 n PRIVATE ADVERTISING 1300 362 272

TESTED 

$24,750 $160,000 

$199,980 $50,000 

CASE IH 695XL. 70hp, Cabin, Challenge 349E 

front end loader + more • NSW 0429 467 147 




2016 GVM Mako. Spra coupe, 2vm boom, 

1500L tank. • NSW 0488 442 372 

SPRAYERS 


2018 New Holland T7-260. 220hp, L4500 

loader + much more • VIC 0402 851 544 



Issue 382 > $7.95 > On sale 27/02/20 

2017 Kioti RX8030SP. ROPS, Loader & 4in1, 

had only light work • QLD 0437 113 771 


4/3/20, 2:48 pm 

Page 1 of 1 

4/3/20, 2:48 pm 

Page 1 of 1 

SEARCH 




magazine 

NEXT 

SEARCH 



list map 


AUSTRALIA 

Find new and used Tractors for GET sale ALERTS 

with Farms & Farm Machinery 

magazine 


$19,750 



list map 

GET ALERTS 


$19,750 






includes gst 


Tractors / Tractors / 0-40hp ! CALL 08 7007 6847 


FEL: YES Rated Engine SAVE Power - ITEM hp: 28 



includes gst 

EMAIL SELLER 


KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

$22,000 





Usage Hours: 5,800 





! CALL 03 8547 8644 



Usage Hours: 5,800 SAVE ITEM 



EMAIL SELLER 


KUBOTA L1-24DT TRACTOR WITH 4 IN 1 

! CALL 03 8547 8644 

FEL 28HP 

$21,450 

Powered by 




BUY 






SELL 

Unlimited 



for just 





Off the Chain 


Fully Charged 



Czech 

44,480+ 

MATE 


8,340+ 



BUILT in south korea 

for australian conditions. 

FINANCE FROM 0.00 % pa** 4 YEAR WARRANTY ° 

rx rops 

series 

Pictured with optional slasher. 

rx7030P 

+ 4 IN 1 LOADER 

$ 

44,995 * EX GST 

$ 

49,495 * inc GST 

70 or 80hp Kioti Diesel Engine 

Wet Clutch Forward - Reverse Shuttle 

Declutch Button 

24 x 24 Manual Transmission 

2x Rear Remotes Standard 

rx8030P 

+ 4 IN 1 LOADER 

$ 

48,295 * EX GST 

$ 

53,125 * inc GST 

A KIOTI MECHRON 

WORTH OVER 

$ 

20K 

Simply purchase any tractor from the PX or RX range between 1 st June and 31 st December 2020 

to go into the draw for your chance to win a KIOTI MECHRON 22OO! 

Visit www.kioti.com.au for details. 

20 

TH 

A NNIVERSARY 

2000-2020 

PHONE 1800 186 866 OR VISIT WWW.KIOTI.COM.AU 

*Pricing ex Brisbane, Melbourne and Perth warehouses. Pre-delivery and freight charges may apply. **Establishment fee and commercial credit criteria applies. ABN holders only. PFG Credit 0.00%p.a. special 

offer requires minimum 1/3rd deposit and 24 monthly repayments. PFG Credit is a division of De Lage Landen Pty Limited ABN 20 101 692 040. ^See website for full terms and conditions. Pricing and finance 

expires 30th September 2020. Pricing available while stocks last. ˚24 months 1500 hours = Full Warranty. 48 months 2000 hours = Powertrain Warranty

GET THE TOOLS FOR 

SERIOUS FARMING 

FENDT 700, 800, 900, 1000 SERIES | 144 – 517 HP 

Driving a Fendt is more than just driving a tractor. It’s driving your business forward with a machine that is truly forward thinking - think 

intelligent engine technology, industry leading operator’s console and record-breaking fuel efficiency. 

Contact your local Fendt dealer for more information. 

Visit fendt.com.au 

Fendt is a worldwide brand of AGCO Corporation. 

says you’re serious.

Farms & Farm Machinery #389

Create successful ePaper yourself

Delete template?

Save as template?