Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8<br />
M<br />
25<br />
12<br />
20<br />
5 113<br />
130<br />
n34<br />
75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
Lever<br />
450<br />
503<br />
<strong>ATS</strong>-<strong>500</strong>-K<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess of the door's bottom (look at the following mounting instructions)<br />
Opening force 22 N (applied to 1m radius)<br />
Closing force 9 N (applied to 1m radius)<br />
<strong>Door</strong> width 1000 mm max<br />
Opening angle 165°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 2,07 kg<br />
10<br />
<strong>Door</strong> <strong>closer</strong><br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
49<br />
100<br />
n8,4<br />
14<br />
14<br />
35<br />
Version 03/2010
8<br />
M<br />
25<br />
20<br />
5<br />
130<br />
n29,6<br />
12 75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
113<br />
450<br />
Lever<br />
503<br />
<strong>ATS</strong>-<strong>500</strong>-30-K<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess of the door's bottom (look at the following mounting instructions)<br />
Opening force 21 N (applied to 1m radius)<br />
Closing force 9 N (applied to 1m radius)<br />
<strong>Door</strong> width 1000 mm max<br />
Opening angle 140°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 1,78 kg<br />
10<br />
<strong>Door</strong> <strong>closer</strong><br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
47<br />
100<br />
Adjusting screw<br />
Counterbore Bf DIN 75 for M8<br />
n8,4<br />
14<br />
14<br />
30<br />
Version 03/2010
Opening angle 140°<br />
Weld on band<br />
=door's rotation axis<br />
Weld in sheet<br />
38<br />
25<br />
30<br />
Opening angle 90°<br />
<strong>ATS</strong>-<strong>500</strong>-K<br />
<strong>ATS</strong>-<strong>500</strong>-30-K<br />
Fixation of tube With 2 pcs. countersunk-head screw M8 at front sheet of door <strong>closer</strong><br />
Fixation of pivot mount Turn pivot mount with an open-end wrench,size 14 until it´s slot lies horizontal and the<br />
lever´s knee points away from the door´s rotation axis. Close the door slowly while<br />
putting the thread bolt M8x24 with it´s lock washer into the drill hole ø 8,2 of the weld<br />
in sheet. Put the hexagon nut with it´s spring washer on to the thread bolt, while the<br />
door is closed and fasten it just moderate. Caution: lever must not pervert.<br />
Start up Open the door carfully as far as you catch hold of the pivot mount with the open end<br />
wrench, size 14. After that fasten the hexagonal nut with 20Nm±2Nm firmly.<br />
Adjustment Regulate the final damping by turning the adjusting screw at the front sheet.<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
498<br />
Mounting<br />
instructions<br />
Pivot mount<br />
Countersunk-head screw M8<br />
Lever<br />
<strong>Door</strong> closed<br />
Version 03/2010
8<br />
M<br />
25<br />
5<br />
130<br />
n34<br />
113<br />
501<br />
20 554<br />
12 75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
Lever<br />
<strong>ATS</strong>-600-K<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess of the door's bottom (look at the following mounting instructions)<br />
Opening force 26 N (applied to 1m radius)<br />
Closing force 15 N (applied to 1m radius)<br />
<strong>Door</strong> width 1200 mm max<br />
Opening angle 150°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 2,07 kg<br />
10<br />
<strong>Door</strong> <strong>closer</strong><br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
100<br />
Adjusting screw<br />
n8,4<br />
Counterbore Bf DIN 75 for M8<br />
14<br />
14<br />
35<br />
Version 03/2010
8<br />
25<br />
20<br />
12<br />
5 113<br />
130<br />
n29,6<br />
75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
501 10<br />
Lever<br />
554<br />
<strong>ATS</strong>-600-30-K<br />
<strong>Door</strong> <strong>closer</strong><br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess of the door's bottom (look at the following mounting instructions)<br />
Opening force 27 N (applied to 1m radius)<br />
Closing force 14 N (applied to 1m radius)<br />
<strong>Door</strong> width 1200 mm max<br />
Opening angle 150°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 2 kg<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
47<br />
100<br />
Adjusting screw<br />
Counterbore Bf DIN 75 for M8<br />
n8,4<br />
14<br />
14<br />
30<br />
Version 03/2010
Opening angle 140°<br />
Weld on band<br />
=door's rotation axis<br />
Weld in sheet<br />
38<br />
25<br />
30<br />
Opening angle 90°<br />
<strong>ATS</strong>-600-K<br />
<strong>ATS</strong>-600-30-K<br />
Fixation of tube With 2 pcs. countersunk-head screw M8 at front sheet of door <strong>closer</strong><br />
Fixation of pivot mount Turn pivot mount with an open-end wrench,size 14 until it´s slot lies horizontal and the<br />
lever´s knee points away from the door´s rotation axis. Close the door slowly while<br />
putting the thread bolt M8x24 with it´s lock washer into the drill hole ø 8,2 of the weld<br />
in sheet. Put the hexagon nut with it´s spring washer on to the thread bolt, while the<br />
door is closed and fasten it just moderate. Caution: lever must not pervert.<br />
Start up Open the door carfully as far as you catch hold of the pivot mount with the open end<br />
wrench, size 14. After that fasten the hexagonal nut with 20Nm±2Nm firmly.<br />
Adjustment Regulate the final damping by turning the adjusting screw at the front sheet.<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
498<br />
Mounting<br />
instructions<br />
Pivot mount<br />
Countersunk-head screw M8<br />
Lever<br />
<strong>Door</strong> closed<br />
Version 03/2010
8<br />
M<br />
25<br />
12<br />
25<br />
n34<br />
75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
113<br />
450<br />
Lever<br />
<strong>ATS</strong>-<strong>500</strong>-KO<br />
<strong>Door</strong> <strong>closer</strong><br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess along the top edge of the door<br />
(look at the following mounting instructions)<br />
Opening force 17 N (applied to 1m radius)<br />
Closing force 8 N (applied to 1m radius)<br />
<strong>Door</strong> width 1000 mm max<br />
Opening angle 150°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 1,875 kg<br />
<strong>500</strong><br />
10<br />
Counterbore Bf DIN 75 for M8<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
50<br />
Knurled adjusting screw<br />
10<br />
14<br />
n8,2<br />
14<br />
34<br />
Version 03/2010
8<br />
M<br />
25<br />
25<br />
n29,6<br />
12 75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
113<br />
450 10<br />
Lever<br />
<strong>ATS</strong>-<strong>500</strong>-30<br />
-KO<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess along the top edge of the door<br />
(look at the following mounting instructions)<br />
Opening force 21 N (applied to 1m radius)<br />
Closing force 8 N (applied to 1m radius)<br />
<strong>Door</strong> width 1000 mm max<br />
Opening angle 150°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 1,56 kg<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
510<br />
<strong>500</strong><br />
<strong>Door</strong> <strong>closer</strong><br />
Counterbore Bf DIN 75 for M8<br />
4<br />
50<br />
Knurled adjusting<br />
screw<br />
14<br />
10<br />
14<br />
n8,4<br />
30<br />
Version 03/2010
Opening angle 140°<br />
Weld on band<br />
=door`s rotation axis<br />
38<br />
Weld in sheet<br />
25<br />
29<br />
Fastening bracket<br />
Opening angle 90°<br />
Pivot mount<br />
Lever<br />
Mounting support<br />
Mounting<br />
instructions<br />
<strong>ATS</strong>-<strong>500</strong>-KO<br />
<strong>ATS</strong>-<strong>500</strong>-30-KO<br />
Fixation of tube With countersunk-head screw M8 at fastening bracket and mounting support at open end of<br />
tube<br />
Fixation of pivot Turn pivot mount with an open-end wrench,size 14 until it´s slot lies horizontal and the lever´s<br />
mount<br />
knee points away from the door´s rotation axis. Close the door slowly while putting the<br />
thread bolt M8x24 with it´s lock washer into the drill hole ø 8,2 of the weld in sheet. Put the<br />
hexagon nut with it´s spring washer on the thread bolt, while the door is closed and fasten it<br />
just moderate. Caution: lever must not pervert.<br />
Start up Open the door carfully as far as you catch hold of the pivot mount with the open end wrench,<br />
size 14. After that fasten the hexagonal nut 20Nm±2Nm firmly.<br />
Adjustment Regulate the final damping by turning the knurled adjusting screw at the end of the cylinder.<br />
<strong>500</strong><br />
<strong>Door</strong> closed<br />
Countersunk-head screw M8<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
Version 03/2010
8<br />
M<br />
25<br />
25<br />
n34<br />
12 75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
113<br />
501 10<br />
Lever<br />
<strong>ATS</strong>-600-KO<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess along the top edge of the door<br />
(look at the following mounting instructions)<br />
Opening force 25 N (applied to 1m radius)<br />
Closing force 13 N (applied to 1m radius)<br />
<strong>Door</strong> width 1200 mm max<br />
Opening angle 140°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 2,175 kg<br />
561<br />
551<br />
Counterbore Bf DIN 75 for M8<br />
<strong>Door</strong> <strong>closer</strong><br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
4<br />
50<br />
Knurled adjusting screw<br />
14<br />
10<br />
n8,2<br />
14<br />
34<br />
Version 03/2010
M8<br />
25<br />
12<br />
25<br />
n29,6<br />
75<br />
Pivot mount<br />
Lock washer<br />
Spring washer<br />
Hexagonal nut<br />
Thread bolt M8<br />
501 10<br />
Lever<br />
<strong>ATS</strong>-600-30<br />
-KO<br />
Specification Automatic door <strong>closer</strong> with hydraulic damping<br />
Application Left or right hinged lift doors with weld on bands<br />
Mounting In a recess along the top edge of the door<br />
(look at the following mounting instructions)<br />
Opening force 27 N (applied to 1m radius)<br />
Closing force 14 N (applied to 1m radius)<br />
<strong>Door</strong> width 1200 mm max<br />
Opening angle 150°<br />
Ambient temperature -15 °C up to +40 °C<br />
Weight 1,78 kg<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
561<br />
551<br />
<strong>Door</strong> <strong>closer</strong><br />
Counterbore Bf DIN 75 for M8<br />
4<br />
50<br />
Knurled adjusting<br />
screw<br />
14<br />
14<br />
10<br />
n8,4<br />
30<br />
Version 03/2010
Opening angle 140°<br />
Weld on band<br />
=door`s rotation axis<br />
38<br />
Weld in sheet<br />
25<br />
29<br />
Fastening bracket<br />
Opening angle 90°<br />
Pivot mount<br />
Lever<br />
<strong>ATS</strong>-600-KO<br />
<strong>ATS</strong>-600-30-KO<br />
Fixation of tube With countersunk-head screw M8 at fastening bracket and mounting support at open end of<br />
tube<br />
Fixation of pivot Turn pivot mount with an open-end wrench,size 14 until it´s slot lies horizontal and the lever´s<br />
mount<br />
knee points away from the door´s rotation axis. Close the door slowly while putting the<br />
thread bolt M8x24 with it´s lock washer into the drill hole ø 8,2 of the weld in sheet. Put the<br />
hexagon nut with it´s spring washer on the thread bolt, while the door is closed and fasten it<br />
just moderate. Caution: lever must not pervert.<br />
Start up Open the door carfully as far as you catch hold of the pivot mount with the open end wrench,<br />
size 14. After that fasten the hexagonal nut 20Nm±2Nm firmly.<br />
Adjustment Regulate the final damping by turning the knurled adjusting screw at the end of the cylinder.<br />
551<br />
Mounting<br />
instructions<br />
Countersunk-head screw M8<br />
Mounting support<br />
<strong>Albert</strong> <strong>Schnetz</strong><br />
Geisenhausenerstraße 20 Tel 089 / 748 901-0 http://www.schnetz.de<br />
81379 Munich,Germany Fax 089 / 748 901-20 info@schnetz.<br />
<strong>Door</strong> closed<br />
Version 03/2010