Placoid
Advanced Fabrication ARCH9109, Rule lined surface geometry programmed for Sprutcam.
Advanced Fabrication ARCH9109, Rule lined surface geometry programmed for Sprutcam.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2020 | Advanced Fabrication | PLACOID
Sprutcam
Cutting Angles Assist Geometry Inverse Tool Axis
Tilting block and raising base to allow
cutting faces at different angles (vertical
and horizontal) without collision with hot
wire and bed.
Sometimes the original surfaces were not
recognised by Sprutcam where a assist
geometry would be required for it to
work.
During machining, sometimes the driven
faces resulted the robot to flip its tool
(the two A’s facing down) which requires
a check in strategy to Inverse Tool Axis to
fix it.
014