Placoid
Advanced Fabrication ARCH9109, Rule lined surface geometry programmed for Sprutcam.
Advanced Fabrication ARCH9109, Rule lined surface geometry programmed for Sprutcam.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2020 | Advanced Fabrication | PLACOID
Ruled Line Surface
Generation
Sweep2
To ensure the blocks were ruled line surfaces,
the technique that were commonly used in
Rhino were the ‘Sweep2’ command.
The Sweep2 ensures that the surface created
from the two referencing curves were 1
directional either U or V.
Each block face were made up of multiple
Sweep2 surfaces which are joined to create a
solid object.
06