Gespasa_General_Catalogue_en

23 KIT ACCESSORIES
Metallic protective holder
DESCRIPTION
CODE
23.2 SUPPORTS
METALLIC PROTECTIVE HOLDER 126801001
Metallic holder with drip tray to be installed on polyethylene tanks of 1,000 litres with metal tubular
framework for all type of assemblies and pumping kits. It is also available made of galvanized steel.
(Size: 170x1,105x605 mm)
Pump bracket handle
PUMP BRACKET HANDLE 030003001
Handle with lower support to be fi tted to gear pumps for an easy handling. It is available in black
colour.
Wall oil dripping
holder
WALL OIL DRIPPING HOLDER 24020
Metallic nozzle holder with drip tray. (Size: 150x150x600 mm)
Adjustable bracket
for hose-reels
ADJUSTABLE BRACKET FOR HOSE-REELS 24050
Adjustable zinc-plated wall bracket to move the hose-reel in the desired position.
Pneumatic pump wall support
PNEUMATIC PUMP WALL SUPPORT 800404020
Zinc-plated support to install the pneumatic pumps on the wall.
Universal support
UNIVERSAL SUPPORT 800404259
Nozzle
hanger
mm
(approx.)
330
kg
(approx.) 2
280
90
Zinc-plated sheet support to fi x the pumping kits in the polypropylene tanks of 1,000 litres “with
metallic framework” and the steel double wall tanks.
It can also be fi xed on the wall.
It has a nozzle hanger with rubber protection and a drip tray.
Mixed wall non-drip support
MIXED WALL NON-DRIP SUPPORT 800405007
Metallic holder with drip tray to hang 2 nozzles and the probe-carrier tubes. It can be fi xed on the
wall or on the ground.
(Size: 300x100x1,200 mm)
Universal hook set
UNIVERSAL ZINC-PLATED HOOK SET 800404049
Support to hang the hose. It is adaptable to all type of drums and tanks.
100
Because of the constant innovations and development, TOT COMERCIAL SA reserves the right to modify the specifi cations of its products and publicity, without prior notifi cation.