Gespasa_General_Catalogue_en

8 PNEUMATIC KITS FOR THE LUBRICANT TRANSFER
KDN-1000 INF.
DESCRIPTION
PNEUMATIC DISPENSER KITS FOR 1,000-LITRE TANK
Lower suction
Pneumatic dispenser kit with lower or top outlet for 1,000-litre polythene tanks.
CODE
*Tank not included
*Tank not included
KDN-1000 SUP.
Composed of:
- Pneumatic wall pump
- RP-1 · Pressure regulator
- 6 m R1 Ø1/2” delivery hose with the universal hook set
- PG-40 manual nozzle for the lubricant supply or PMGE-40 electronic nozzle-meter for the lubricant
supply and measure with 60º rigid outlet with non-drip valve
- Universal support with nozzle hanger
- 0.70 m R1 high pressure hose
- TAC · Aluminium adapter plug
KDN-1000 INF. GM-3 (SAE 15/50) without meter
KDN-1000E INF. GM-3 (SAE 15/50) with meter
KDN-1000 INF. GM-5 (SAE 15/140) without meter
KDN-1000E INF. GM-5 (SAE 15/140) with meter
Direct top suction
- 2” bung adapter and adapter plug for 1,000-litre tanks
- 3/4” metallic suction tube kit · height 1 m with fi lter built in
KDN-1000 SUP. GM-3 (SAE 15/50) without meter
KDN-1000E SUP. GM-3 (SAE 15/50) with meter
KDN-1000 SUP. GM-5 (SAE 15/140) without meter
KDN-1000E SUP. GM-5 (SAE 15/140) with meter
20670
20600
20950
20960
20680
20690
20890
20910
DAN-1000
DAN-1000 · PNEUMATIC DISPENSER KIT FOR 1,000-LITRE TANK 12680
*Tank not included
DAN-1000L INF.
Kit for the 1,000-litre polythene tanks.
For its installation it only needs an air inlet at 1 m of the kit.
Composed of:
- GM-3 pneumatic wall pump
- RP-1 · Pressure regulator
- Open hose-reel
- 10 m R1 Ø1/2” delivery hose
- R1 Ø1/2” delivery hose with adapters in both ends, hose-reel connection to the pump
- PMGE-40 electronic nozzle-meter for the lubricant supply and measure with fl exible tube with 90º
rigid outlet and non-drip end
- 3/4” metallic suction tube, height 1 m with fi lter built in
- Universal support
*Tank not included
DAN-1000L SUP.
DAN-1000L LATERAL · PNEUMATIC DISPENSER KIT FOR 1,000-LITRE TANK
Kit with the same components as the above one but with the metallic support designed for being
assembled in the lateral of the 1,000-litre tank.
This support is placed in the metallic protection of the tank without screws or additional fi xations.
Lower suction
12683
Direct top suction 12682
Optional:
*Tank not included
- DP-1000LX · Polythene tank of 1,000-litre capacity (page 98) 37030
IT MUST BE INSTALLED A REGULATOR-LUBRICATOR-PURIFIER WHEN INSTALLING THE PNEUMATIC PUMPS.
88
Because of the constant innovations and development, TOT COMERCIAL SA reserves the right to modify the specifi cations of its products and publicity, without prior notifi cation.