Gespasa_General_Catalogue_en

1 «MONOBLOC» SELF-SUCTION GEAR PUMPS FOR LUBRICANTS
25
l/min
230
VAC
0.37
0
KW
EA-88 (0.37 kW)
mm 190
(approx.)
260
160
kg
(approx.) 10
DESCRIPTION
25 l/min 230 VAC
Self-suction gear pumps suitable for the lubricant transfer.
They are suitable for its use in the agriculture, building, public works and industry.
EA-88 (0.37 kW) 230 VAC · 20-25 l/min 5-6
03000
- It is suitable for lubricants of maximum 200 cSt viscosity.
bar
- With recirculation bypass system
- Suction: 2.5 m · Delivery: 40 m
- Flow: 20-25 l/min (SAE-20/50 W at 25 ºC)
- Motor: 0.37 kW 230 VAC 50/60 Hz single-phase · self-ventilated
- IP-55 protection
- With thermal protector
- Consumption: 2-4 A
- 1,500 rpm
- Bypass pressure: 5-6 bar
- Inlet/outlet: 1/2” GAS (BSP)
- ON/OFF switch
- 3 m 230 VAC connection cable with injected plug
CODE
0.74
kW
mm 200
(approx.)
290
190
Flow curves
EA-88 (0.74 kW)
kg
(approx.) 13.2
*Note: Free outlet fl ow
The fi nal fl ow is subject to the accessories and
the installation conditions.
EA-88 (0.74 kW) 230 VAC · 20-25 l/min 9-10
bar
03070
- It is suitable for lubricants of maximum 350 cSt viscosity
- With recirculation bypass system
- Suction: 2.5 m · Delivery: 40 m
- Flow: 20-25 l/min (SAE-20/50 W at 25 ºC)
- Motor: 0.74 kW 230 VAC 50/60 Hz single-phase · self-ventilated
- IP-55 protection
- With thermal protector
- Consumption: 4-6 A
- 1,500 rpm
- Bypass pressure: 9-10 bar
- Inlet/outlet: 1/2” GAS (BSP)
- ON/OFF switch
- 3 m 230 VAC connection cable with injected plug
Optional:
• Pump support handle (page 100) 030003001
SEA-88 with MGE-40
SEA-88 (0.37 kW) · PUMP WITH MGE-40 ELECTRONIC GEAR METER
SEA-88 (0.74 kW) · PUMP WITH MGE-40 ELECTRONIC GEAR METER
31201
31202
EA-88 (0.37 kW) with pressure switch · 10 bar
EA-88 (0.74 kW) with pressure switch · 35 bar
10-35
bar
03110
03080
In an industrial supply installation at long distance, it is advisable to equip the pump with a
PRESSURE SWITCH, which allows the pump starting and stopping through the nozzle opening or
closing.
It has built in a check valve.
EA-88 with pressure switch
Optional:
• Pump support handle (page 100)
• Vacuum gauge (pump with pressure switch)
030003001
803500002O
Flow curves
EA-88 0.37 kW 230 VAC
Flow curves
EA-88 0.74 kW 230 VAC
Pressure (bar) · NPSH (bar)
Pressure (bar) · NPSH (bar)
Flow (l/min)
Flow (l/min)
80
Because of the constant innovations and development, TOT COMERCIAL SA reserves the right to modify the specifi cations of its products and publicity, without prior notifi cation.