02.11.2020 Views

Gespasa_General_Catalogue_en

Manufacturers since 1974 of professional equipment for the transfer, filtering, measurement, storage, transport and control of fuels, lubricants, greases and automotive fluids.

Manufacturers since 1974 of professional equipment for the transfer, filtering, measurement, storage, transport and control of fuels, lubricants, greases and automotive fluids.

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

PNEUMATIC EXTRACTOR-DECONTAMINATOR

35

DESCRIPTION

CODE

Diesel Petrol

LGN-200 · PNEUMATIC MULTI-USE EXTRACTOR-DECONTAMINATOR 48020

LGN-200

- It is designed for the fuel extraction, storage, filtering and also its supply, specially suitable for

“RENT A CAR”.

- First it suctions the vehicle fuel, which is filtered. This can be supplied from the same kit with the

supply nozzle and the electronic meter.

- The liquid transfer is controlled through the electronic meter or through the lower valve but without

metering it.

- It allows the vacuum / pressure conservation in its inner to extract/empty where there is not any

air intake.

Technical data:

- Extraction system based on the depression creation in the tank inner (Ventury system) (-0.8 bar)

- Emptying system at pressure (0.45 bar)

- Sealed security valve, tared at 0.5 bar

- Sealed valve that regulates the air inlet, tared at 0.9 bar

- Air hose connection

- Water-repellent filtering element of 5 μm (micron)

- Minimum pressure: 6 bar

- Required air pressure of 200 l/min at 6 bar or suctioned flow of 400 l/min

mm 1,615

(approx.)

950

950

kg

(approx.) 135

Equipped with:

Vacuum gauge -1 +3 bar · Tank for the extracted fuel of 200-litre capacity · Transparent vessel of

10-litre capacity · Earth connection· Lower valve for the total empty of the tank · Level indicator ·

MGE-40 electronic gear meter · PA-60 automatic nozzle · 1.5 m Ø12x9 mm tank extraction tube

· 1.5 m Ø8x6 mm tank extraction tube · 4 m Ø20 mm transparent hose · 5.5 m transparent hose

with 1/2” metallic galvanised lance · chassis with a handle and wheels

Optional:

• Water paste · water level indicator

• 5.5 m transparent hose + 1 m metallic galvanised lance

• 2 x Ø12x9 mm and 8x6 mm tank extraction tubes of 1.5 m (each one)

• 0.75 m M3/4” complete drain probe

• Air output tube adapter (service station)

807613001

480006002

480006001

480006003

480105010

USE GUIDE

Plug it into the air inlet until getting the exact

pressure.

Close the air valve and place the extractordecontaminator

close to the container. Put the probe

at its bottom.

It suctions the impurities of the tank bottom.

Because of the constant innovations and development, TOT COMERCIAL SA reserves the right to modify the specifi cations of its products and publicity, without prior notifi cation.

71

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!