Modular compressed air purification.
Modular compressed air purification.
Modular compressed air purification.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Plus from ultrafilter – dry <strong>compressed</strong><br />
<strong>air</strong><br />
Leaving the last filtration stage the <strong>compressed</strong><br />
<strong>air</strong> is free of particles, oil and<br />
water but far from being dry. ultrafilter has<br />
therefore integrated their proven membrane<br />
dryer in the FRL system.<br />
Air coming from the filters enters the integrated<br />
dryer and is led through the centre<br />
of a bundle of hollow fibres. Moisture diffuses<br />
across the semi-permeable membranes<br />
as <strong>air</strong> moves through the centre of<br />
the hollow fibre bundle. A small portion of<br />
the dried <strong>compressed</strong> <strong>air</strong> is led back over<br />
the outside of the fibre bundle and vented<br />
to atmosphere via outlets. The dry <strong>air</strong> produced<br />
leaves the system in order to drive<br />
the application or to enter the next <strong>purification</strong><br />
step.<br />
Always the right pressure.<br />
Different pneumatic components usually<br />
require different operation pressures. The<br />
purified <strong>compressed</strong> <strong>air</strong> comes with an<br />
<strong>Modular</strong> Compressed Air Purification with integrated Dryer:<br />
VarioDry FRL<br />
� � � � �<br />
operating pressure generated in a central<br />
compressor station. The operating pressure<br />
has to become adjusted to the individual<br />
pneumatic components. An implemented<br />
regulator ensures that the maximum<br />
pressure for the pneu-matic component<br />
will not be exceeded and eliminates the<br />
transmission of pressure shock waves.<br />
No bitter aftertaste.<br />
After filtration and drying the purified <strong>compressed</strong><br />
<strong>air</strong> still contains oil and water<br />
aerosols and odour. If the following pneumatic<br />
components requires absolutely oilfree<br />
<strong>compressed</strong> <strong>air</strong>, e.g. in food industry,<br />
these aerosols must be eliminated by an<br />
activated carbon filter.<br />
ultrafilter Oil Mist Lubricator – and everything<br />
will work out fine.<br />
Usually pneumatic cylinders and actuators<br />
depend on a constant amount of lubricated<br />
<strong>compressed</strong> <strong>air</strong> in order to do their job<br />
with the required precision and repeating<br />
accuracy. These pneumatic components<br />
1 Filter-Water-Separator with cyclone<br />
system and filter element, filter<br />
element available in different pore<br />
sizes<br />
2 Submicrofilter equipped with ultrafilter<br />
filter element ultr<strong>air</strong> ® SMF<br />
3 VarioDry FRL with integrated purge <strong>air</strong><br />
nozzle and internal regeneration <strong>air</strong> duct<br />
4 Pressure Regulating Valve and Pressure<br />
Gauge for outlet pressure visualisation,<br />
handwheel lockable<br />
5 Activated Carbon Filter equipped with<br />
ultrafilter filter element ultrac ® AK<br />
therefore depend on a certain amount of<br />
oil only a lubricator can ensure. The ultrafilter<br />
mist lubricator ensures function of<br />
pneumatic components and improves operation<br />
time.<br />
Technical alterations reserved (Date 03/03)<br />
AG Büssingstraße 1 · D-42781 Haan · Telefon ++49/2129/569-0 · Telefax ++49/2129/569-100