Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
4.2<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP4206<br />
L 6.0mm<br />
SP4208<br />
L 8.0mm<br />
SP4210<br />
L 10.0mm<br />
SP4211<br />
L 11.5mm<br />
SP4213<br />
L 13.0mm<br />
SP4216<br />
L 16.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
400-<br />
600<br />
200-<br />
400<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 3.5-4.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 17 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Change language